Re: [Bacula-users] Recycle Tape marked used but not the oldest volume.

Hello Gi Dot, I think that this problem and solution to the problem is very similar to that we solved yesterday here: https://adsm.org/lists/html/Bacula-users/2016-09/msg8.html I don't mean the same technical solution but only analogy to use a workarround and its consequences. You

Re: [Bacula-users] Bacula plugin for backing-up Linux 7 & CentOS 7 machine in network

Hello Viraj, I am not sure what is the problem. Let me describe in points what I know and what I don't know and please confirm YES/NO each of these points. I know: 1) You use following hardware https://www.ixsystems.com/freenas-mini/ 2) by the GUI in this hardware you installed Bacula SD, 3) by

Re: [Bacula-users] IBM DAT 160 (dds6) media status error after backup.

Hello Gi Dot, That is fantastic. You found source of the problem and you fixed the source. From this time the workarround with shell scripts is not needed anymore. By the way you fixed your tape drive problem with EOF position and you adjusted your tape drive to work with Bacula. Only good

Re: [Bacula-users] IBM DAT 160 (dds6) media status error after backup.

Hi, I don't use the mount and umount scripts anymore by setting the following parameters: AlwaysOpen = no AutomaticMount = yes Previously I had AlwaysOpen set to yes and therefore I had to manually unmount it so that the tape is ready to be ejected by the user. AutomaticMount was not set as

Re: [Bacula-users] Bacula release version 7.4.4

> Hi Team, > I am using FreeNAS Mini from iXsystems with below configuration: > Build: FreeNAS 9.10.1 (d989edd) > Platform: Intel Atom C2750 @ 2.40GHz > Memory: 16GB > HDD: 1 x 3TB 7200rpm > I’ve created a user with NFS service enabled & installed Bacula SD > 5.2.12_3-amd64 (using GUI). >

Re: [Bacula-users] Bacula release version 7.4.4

ps the manuals are here: http://blog.bacula.org/documentation/documentation/ On 9/23/2016 5:56 AM, Viraj Bhujbal wrote: > > Hi Team, > > I am using FreeNAS Mini from iXsystems with below configuration: > > > > Build: FreeNAS 9.10.1 (d989edd) > > Platform: Intel Atom C2750 @ 2.40GHz > > Memory:

Re: [Bacula-users] Bacula plugin for backing-up Linux 7 & CentOS 7 machine in network

Hello, On Thu, Sep 22, 2016 at 1:36 PM, Viraj Bhujbal wrote: > Now, I want to take backup of my Linux 7 & CentOS 7 machine in my network > to this FreeNAS. > > Please let me know how do I proceed. > You can use the backport repository for 7.4. It supports all non-EOL

Re: [Bacula-users] Bacula release version 7.4.4

This question is starting to sound like a general "how do I use Bacula?" question. Please see the documentation about how to configure your Director and Clients and work up an initial test backup. I assume whichever machine is already running your Director either has a mount on the FreeNAS or

Re: [Bacula-users] Bacula release version 7.4.4

Hi Team, I am using FreeNAS Mini from iXsystems with below configuration: Build: FreeNAS 9.10.1 (d989edd) Platform: Intel Atom C2750 @ 2.40GHz Memory: 16GB HDD: 1 x 3TB 7200rpm I’ve created a user with NFS service enabled & installed Bacula SD 5.2.12_3-amd64 (using GUI). I’ve also

Re: [Bacula-users] Bacula release version 7.4.4

Hello Viraj, I think that in Bacula Community version there isn't any Bacula FreeNAS plugin or I wrong understood your question. Could you explain what do you mean? Best regards. Marcin Haba (gani) On 23 September 2016 at 13:32, Viraj Bhujbal wrote: > Hi Team, > >

Re: [Bacula-users] IBM DAT 160 (dds6) media status error after backup.

Hello Gi Dot, OK, fine. Please note that mount and umount scripts that you mentioned are defined on Director side, not on Storage Daemon side. You also mentioned that you removed mount.sh and umount.sh after some tests. To btape you use bacula-sd.conf as a param in which you don't use mount.sh

Re: [Bacula-users] IBM DAT 160 (dds6) media status error after backup.

Yes, I'm planning to add the suggested parameters as well. Will also try out the mt-st command. I am pretty sure that the error occurred due to the mount and unmount scripts that I included in each run of the backup job, it would be interesting to see if the error still appear with the new

Re: [Bacula-users] Bacula release version 7.4.4

Hi Team, Thank you for the update. I would like to know whether this plug-in has been tested for FreeNAS 9.10.1 stable. Viraj Bhujbal | Pre-Sales M: +91 9130 08 7741 E: vi...@rahisystems.com www.rahisystems.com

Re: [Bacula-users] Baculum xenial package.

Hello Piero, I saw your message here from a few days but I didn't have time to respond here. Now I am trying to catch up reading mails from mailing groups. Answering to your question - no, there isn't Baculum packages for Ubuntu 16.04 Xenial. I can prepare these pacakges but for now I can

Re: [Bacula-users] IBM DAT 160 (dds6) media status error after backup.

Hello Gi Dot, Thanks for this output from btape test. You are asking about my thoughts. Looking on advices in your btape output, I would propose to add these three directives to device config: Hardware End of Medium = No Fast Forward Space File = No BSF at EOM = yes You mentioned that you

Re: [Bacula-users] IBM DAT 160 (dds6) media status error after backup.

Oh ya btw I'm using the mt command. On Fri, Sep 23, 2016 at 5:51 PM, Gi Dot wrote: > Hi, > > Thanks for your reply. I have changed my bacula-sd.conf configuration > since a couple of weeks, and removed the mount.sh and umount.sh scripts. So > far I have not received the tape

Re: [Bacula-users] IBM DAT 160 (dds6) media status error after backup.

Hi, Thanks for your reply. I have changed my bacula-sd.conf configuration since a couple of weeks, and removed the mount.sh and umount.sh scripts. So far I have not received the tape error anymore. I did run the btape test as suggested, and seems like I have more modification to make. Let me