*# ## # New alert command in Bacula 9.0.0# # Note: you must have the
sg3_utils (rpms) or the# #sg3-utils (deb) installed on your
system.# #and you must set the correct control device that#
#corresponds to the Archive Device# Control Device = /dev/sg?? #
must be SCSI c
There are symlinks for the archive devices but not the tape drive control
devices which is what the tape alert commands need. I did already have it
set to use the symlink for the autochanger at least so that won't jump
around.
*> ls -l /dev/tape/by-id*
*total 0lrwxrwxrwx 1 root root 9
This is the rules file, I will have to spend some time going through it.
Thanks.
*> cat /lib/udev/rules.d/60-persistent-storage-tape.rules*
*# do not edit this file, it will be overwritten on update*
*# persistent storage links: /dev/tape/{by-id,by-path}*
*ACTION=="remove", GOTO="persistent_stor
imply by changing the "SIBM" model to the
output of the" scsi_id --page=0x80" command for a different model drive.
Thanks,
Nate
On Sun, Jan 27, 2019 at 9:14 PM Nate K wrote:
> This is the rules file, I will have to spend some time going through it.
> Thanks.
>
> *> c
it would be nice to figure out how to filter it. The
extra symlinks are just clutter though and don't harm anything so I'll call
this good for now.
Thanks,
Nate
On Mon, Jan 28, 2019 at 7:07 PM Nate K wrote:
> I tried creating a new rules file based on the existing tape rules but I
&g
Thanks for explaining how to check the ATTRS value! The rules file works
well now. Awesome!
On Tue, Jan 29, 2019 at 6:50 PM Adam Nielsen wrote:
> > I ended up figuring out on accident my udev rules file did work, I had
> just
> > been trying to test it by restarting the service but it took a f
Hi,
I have four pools set up, library_a (the local pool), offsite_full,
offsite_diff, and Scratch. The way I planned this, when a full or
differential backup finishes for the offsite pools I would look at the list
of which tapes were written to and take them out of the autochanger and
move them t
er as they'd
be listed separately but I think it's also an extra complication I can do
without.
On Sat, Feb 2, 2019 at 1:15 PM Nate K wrote:
> Hi,
>
> I have four pools set up, library_a (the local pool), offsite_full,
> offsite_diff, and Scratch. The way I planned this, wh
I've tried to figure this out on my own with searches and going through the
manual and I need some clarification. I've included the relevant section
of the bacula-sd.conf file below. I'm confused because I think this should
work properly but I am getting the message "is waiting on max Client jobs
connected
over 10gbe) or change to spool attributes only or leave spooling off
altogether. Is there a way to check if the drives are being bottlenecked and
causing “shoe shining”?
On Feb 6, 2019, at 9:48 AM, Martin Simmons wrote:
>>>>>> On Wed, 6 Feb 2019 00:05:21
160 mb/s max so should I assume even the fast server on 10gbe is a bottle
neck? I guess I will keep the max jobs per client at 1 and look into
setting up a ram disk for spooling.
On Wed, Feb 6, 2019 at 10:06 AM Nate K wrote:
> Thanks Martin, I will add the max clients jobs directive. That i
11 matches
Mail list logo
