Thanks for the advice, _most_ responsive list I belong to! cheers! gary
2011/12/19 Radosław Korzeniewski :
> Hello,
>
> 2011/12/16 gary artim
>>
>> No, just Spool Attributes = yes. g.
>>
>
> A "direct" backup from FD into a SD tape device is performed
No, just Spool Attributes = yes. g.
On Fri, Dec 16, 2011 at 3:27 AM, Marcello Romani
wrote:
> Il 15/12/2011 20:31, gary artim ha scritto:
>> will do, interestingly I picked another slot on my autochanger
>> (different lto vol) and got (see below), running a peak time no less.
>
I'm working on going to SATA 3, current raid is SATA 1 (1.5). I have
run benchmarks, but have to dig (find) them or rerun...g.)
On Fri, Dec 16, 2011 at 1:18 AM, Uwe Schuerkamp
wrote:
> On Thu, Dec 15, 2011 at 10:25:04AM -0800, gary artim wrote:
>> no, full, doing a mod on run comma
help. Nice option for testing, thanks
2:04 with Spool Attributes=yes 3.8 GB/minute, with system busy
1:37 w/o Spool Attributes=no 2.66 GB/minute
On Thu, Dec 15, 2011 at 11:31 AM, gary artim wrote:
> will do, interestingly I picked another slot on my autochanger
> (different lto v
Volume Session Time:1323969555
Last Volume Bytes: 257,601,203,200 (257.6 GB)
Non-fatal FD errors:0
SD Errors: 0
FD termination status: OK
SD termination status: OK
Termination:Backup OK
On Thu, Dec 15, 2011 at 11:25 AM, John Drescher wr
no seperate drive.
On Thu, Dec 15, 2011 at 10:26 AM, John Drescher wrote:
> On Thu, Dec 15, 2011 at 1:25 PM, gary artim wrote:
>> no, full, doing a mod on run command in bconsole to force full backup
>> on every test. cheers
>>
>
> Is the bacula database on t
no, seperate drive. g.
On Thu, Dec 15, 2011 at 10:26 AM, John Drescher wrote:
> On Thu, Dec 15, 2011 at 1:25 PM, gary artim wrote:
>> no, full, doing a mod on run command in bconsole to force full backup
>> on every test. cheers
>>
>
> Is the bacula database on t
no, full, doing a mod on run command in bconsole to force full backup
on every test. cheers
On Thu, Dec 15, 2011 at 10:21 AM, John Drescher wrote:
> On Thu, Dec 15, 2011 at 1:09 PM, gary artim wrote:
>> using this bacula-sd.conf, the best I get is about 2.4GB a minute. I'm
>&
# ( about 2.4GB/minute/with 12GB Max File Size )
Maximum File Size = 12GB
Autochanger = yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
Alert Command = "sh -c 'smartctl -H -l error %c'"
}
On Fri, Dec 2, 2011 at 2:12 PM, gary artim wrote
++
btape: btape.c:608 Wrote 1 EOF to "LTO-4" (/dev/nst0)
btape: btape.c:410 Volume bytes=21.47 GB. Write rate = 26.51 MB/s
++
On Wed, Nov 30, 2011 at 8:02 AM,
t; (/dev/nst0)
btape: btape.c:410 Volume bytes=21.47 GB. Write rate = 95.44 MB/s
+.
btape: btape.c:608 Wrote 1 EOF to "LTO-4" (/dev/nst0)
btape: btape.c:410 Volume bytes=21.47 GB. Write rate = 95.44 MB/s
+.
btape: btape.c:608 Wrote 1 EOF to "LTO-4" (/dev/nst0)
btape: btape.
Partition 0 Remaining Kbytes: 799204
Partition 0 Size in Kbytes: 799204
ActivePartition: 0
EarlyWarningSize: 0
NumPartitions: 0
MaxPartitions: 0
On Thu, Dec 1, 2011 at 10:49 AM, wrote:
> In the message dated: Thu, 01 Dec 2011 16:27:33 GMT,
> The pithy ruminations from Alan Brown on
>
I get some time. gary
On Thu, Dec 1, 2011 at 8:00 AM, Alan Brown wrote:
> gary artim wrote:
>>
>> thank much! will try testing with btape.
>
> Please let us know the results
>
>> btw, I ran with 20GB maximum
>> file size/2MB max block (see bacula-sd.conf bel
%c |grep TapeAlert|cat'"
Alert Command = "sh -c 'smartctl -H -l error %c'"
}
On Wed, Nov 30, 2011 at 11:48 PM, Andrea Conti wrote:
> On 30/11/11 19.43, gary artim wrote:
>> Thanks much, I'll try today the block size change first. Then try the
>>
block size change didnt make much difference, but also running with an
rsync running against the backup volume (raid 5). Adding spool and
will run with both blocksize change and spool configuration. -- gary
On Wed, Nov 30, 2011 at 10:43 AM, gary artim wrote:
> Thanks much, I'll try t
Thanks much, I'll try today the block size change first. Then try the
spooling. Dont have any unused disk, but may have to try on a shared
drive.
The "maximum file size" should be okay? g.
On Wed, Nov 30, 2011 at 8:45 AM, Alan Brown wrote:
> gary artim wrote:
>>
>>
Hi --
Getting about 41.6/MBs and hoping for closer to the max (120MB). I
tried maximum file sizes of 5, 8, 12GB -- 12GB the best the others
where about 35/MBs. Any advise welcomed...should I look at max/min
block sizes?
most of the data is big, genetics data -- filesizes avg in the 500/MB
to 3-4/G
master
Raid, I could change this if i get this working. thanks for
responding!
On Thu, Nov 17, 2011 at 7:07 PM, Dan Langille wrote:
> On Nov 17, 2011, at 11:30 AM, gary artim wrote:
>
>> Hi List --
>>
>> scheduled a job to do incremental and fired off a full backup as I
>&g
Hi List --
scheduled a job to do incremental and fired off a full backup as I
thought it would. Wrote about 9GB bytes to lto-4 tape and has since
just sat there in a R job status. I have an autoloader with 12
volumes available but can't find a problem other then it seem hung.
Any debugging advic
19 matches
Mail list logo
