Re: [Bacula-users] Can't find the tape changer

Does the failure remain after retrying after a minute or two? I've used some changers that tended to throw errors like the above for the first half-a-minute or so following a reset. Make that easily 5 or 10 minutes if the library somehow has to inventory its content, because a tape magazine

Re: [Bacula-users] Can't find the tape changer

Henry Yen wrote: On Mon, Jan 18, 2010 at 09:17:51AM -0500, Dan Langille wrote: ]# mtx -f /dev/sg6 status mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=0 (Unknown?!) mtx: Request Sense: Sense Key=No Sense mtx: Request Sense:

Re: [Bacula-users] Can't find the tape changer

Robert Hartzell wrote: On 01/18/10 07:17 PM, Dan Langille wrote: Dan Langille wrote: I'm helping a client with a Linux system. I see the tape drive, but cannot find the tape changer. Clues please. From dmesg: Also: Linux version 2.6.9-78.0.8.plus.c4smp (mockbu...@builder10.centos.org)

Re: [Bacula-users] Can't find the tape changer

Here is a instruction about Dell PowerVault 124T and LUNs under Linux. http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux Subject Enabling LUN Support in Linux Maybe this is the solution. Regards. Marcin -- View this message in context:

Re: [Bacula-users] Can't find the tape changer

ganiuszka wrote: Here is a instruction about Dell PowerVault 124T and LUNs under Linux. http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux Subject Enabling LUN Support in Linux Maybe this is the solution. This is what I see now (output

Re: [Bacula-users] Can't find the tape changer

On Tue, 19 Jan 2010 09:56:16 -0500 Dan Langille d...@langille.org wrote: Henry Yen wrote: On Mon, Jan 18, 2010 at 09:17:51AM -0500, Dan Langille wrote: ]# mtx -f /dev/sg6 status mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error

Re: [Bacula-users] Can't find the tape changer

Dan Langille wrote: ganiuszka wrote: Here is a instruction about Dell PowerVault 124T and LUNs under Linux. http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux Subject Enabling LUN Support in Linux Maybe this is the solution. This is what I see

Re: [Bacula-users] Can't find the tape changer

I have a PowerVault 124T. Under RHEL 5. Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SUPERModel: GEM318 Rev: 0 Type: ProcessorANSI SCSI revision: 02 Host: scsi0 Channel: 01 Id: 06 Lun: 00 Vendor: SUPERModel: GEM318

Re: [Bacula-users] Can't find the tape changer

resending with cc to list: Richard Scobie wrote: Dan Langille wrote: ganiuszka wrote: Here is a instruction about Dell PowerVault 124T and LUNs under Linux. http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux Subject Enabling LUN Support in

Re: [Bacula-users] Can't find the tape changer

On Tue, Jan 19, 2010 at 10:01:50AM -0500, Dan Langille wrote: Bugger. I get none of the above: # lsscsi -g -bash: lsscsi: command not found How about sg3_utils, then? Try: sg_map -i -x It is in the CENTOS pools: yum install sg3_utils and is installable as static binaries. I could

Re: [Bacula-users] Can't find the tape changer

Dan Langille wrote: Fusion MPT SPI Host driver 3.12.19.00rh ACPI: PCI Interrupt :11:08.0[A] - GSI 16 (level, low) - IRQ 169 mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator,Target} scsi2 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=169 Vendor: IBM

Re: [Bacula-users] Can't find the tape changer

Hi, 19.01.2010 20:04, Dan Langille wrote: I see some things that I would look at more closely. See below. ... mptctl_gettargetinfo - buffer is full but more targets are available on ioc 0 numDevices=1 I don't know if this is an error condition, but it would be worth checking if this is

Re: [Bacula-users] Can't find the tape changer

Hi, 19.01.2010 16:01, Dan Langille wrote: Robert Hartzell wrote: On 01/18/10 07:17 PM, Dan Langille wrote: Dan Langille wrote: I'm helping a client with a Linux system. I see the tape drive, but cannot find the tape changer. Clues please. From dmesg: Also: Linux version

Re: [Bacula-users] Can't find the tape changer

Alex Chekholko wrote: On Tue, 19 Jan 2010 09:56:16 -0500 Dan Langille d...@langille.org wrote: Henry Yen wrote: On Mon, Jan 18, 2010 at 09:17:51AM -0500, Dan Langille wrote: ]# mtx -f /dev/sg6 status mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request

Re: [Bacula-users] Can't find the tape changer

John BORIS wrote: I have a PowerVault 124T. Under RHEL 5. Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SUPERModel: GEM318 Rev: 0 Type: ProcessorANSI SCSI revision: 02 Host: scsi0 Channel: 01 Id: 06 Lun: 00 Vendor: SUPER

Re: [Bacula-users] Can't find the tape changer

Henry Yen wrote: On Tue, Jan 19, 2010 at 10:01:50AM -0500, Dan Langille wrote: Bugger. I get none of the above: # lsscsi -g -bash: lsscsi: command not found How about sg3_utils, then? Try: sg_map -i -x ]# sg_map -i -x /dev/sg0 0 0 8 0 13 DPBACKPLANE 1.05

Re: [Bacula-users] Can't find the tape changer

On Wed, January 20, 2010 06:04, Dan Langille wrote: [SNIP] The prceeding shows *3* SCSI controllers: scsi0, scsi1, and scsi2. The one you want is scsi2, which is an LSI 53C1030 http://www.lsi.com/storage_home/products_home/standard_product_ics/scsi_ics/lsi53c1030/index.html, according to this:

[Bacula-users] Can't find the tape changer

I'm helping a client with a Linux system. I see the tape drive, but cannot find the tape changer. Clues please. From dmesg: scsi2 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=169 Vendor: IBM Model: ULTRIUM-TD3 Rev: 6B20 Type: Sequential-Access

Re: [Bacula-users] Can't find the tape changer

Dan Langille d...@langille.org kirjoitti viestissä news:4b54c50e.60...@langille.org... I'm helping a client with a Linux system. I see the tape drive, but cannot find the tape changer. Clues please. From dmesg: Attached scsi generic sg5 at scsi2, channel 0, id 6, lun 0, type 1 Attached

Re: [Bacula-users] Can't find the tape changer

Timo Neuvonen wrote: Dan Langille d...@langille.org kirjoitti viestissä news:4b54c50e.60...@langille.org... I'm helping a client with a Linux system. I see the tape drive, but cannot find the tape changer. Clues please. From dmesg: Attached scsi generic sg5 at scsi2, channel 0, id 6,

Re: [Bacula-users] Can't find the tape changer

Dan Langille wrote: I'm helping a client with a Linux system. I see the tape drive, but cannot find the tape changer. Clues please. From dmesg: Also: Linux version 2.6.9-78.0.8.plus.c4smp (mockbu...@builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-10)) #1 SMP Thu Nov 27

Re: [Bacula-users] Can't find the tape changer

On 01/18/10 07:17 PM, Dan Langille wrote: Dan Langille wrote: I'm helping a client with a Linux system. I see the tape drive, but cannot find the tape changer. Clues please. From dmesg: Also: Linux version 2.6.9-78.0.8.plus.c4smp (mockbu...@builder10.centos.org) (gcc version 3.4.6

Re: [Bacula-users] Can't find the tape changer

Dan Langille wrote: Dan Langille wrote: I'm helping a client with a Linux system. I see the tape drive, but cannot find the tape changer. Clues please. From dmesg: Also: Linux version 2.6.9-78.0.8.plus.c4smp (mockbu...@builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat

Re: [Bacula-users] Can't find the tape changer

On Mon, Jan 18, 2010 at 09:17:51AM -0500, Dan Langille wrote: ]# mtx -f /dev/sg6 status mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=0 (Unknown?!) mtx: Request Sense: Sense Key=No Sense mtx: Request Sense: FileMark=no mtx: