Hi,
On Tue, Aug 01, 2017 at 04:02:32PM +0200, Norbert Wiedmann wrote:
> after debugging a while, I found the reason:
> In file bootchooser.c, in funktion bootchooser_save(..) the call of
>
> ret = pr_setenv(bc, "%s.remaining_attempts=%d",
> target->state_prefix,
>
On Tue, Aug 01, 2017 at 11:19:34AM +0200, Steffen Trumtrar wrote:
> Signed-off-by: Steffen Trumtrar
Could you add a more verbose patch description?
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutron
On Tue, Aug 1, 2017 at 11:46 AM, Uwe Kleine-König
wrote:
> Hello,
>
> a bit unrelated to this patches: I try to setup spi on my imx7d board
> but it hangs in cspi_2_3_xchg_single. So it would be great to know if
> spi works for you.
Haven't had a chance to use non-bitbanged SPI on that board, I'l
Hello,
a bit unrelated to this patches: I try to setup spi on my imx7d board
but it hangs in cspi_2_3_xchg_single. So it would be great to know if
spi works for you.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König|
Industrial Linux Solutions
This provides low level initialization of pll and ddr2. Resulting binary
should work from SRAM, DDR2 and SPI flash. If started from DDR2 RAM
level initialization will skipped.
Signed-off-by: Oleksij Rempel
---
arch/mips/Makefile | 1 +
arch/mips/boards/tplink-wdr
According to the documentation:
"The AR9344 is a highly integrated and feature-rich IEEE 802.11n 2x2 2.4/5 GHz
System-on-a-Chip (SoC) for advanced WLAN platforms.
It includes a MIPS 74Kc processor, PCI Express 1.1 Root Complex and Endpoint
interfaces, five port IEEE 802.3 Fast Ethernet Switch with
This patch set is providing initial support for QCA AR9344 SoC.
So far it provides PLL and DDR2 initialization.
UART and SPI controller should work as well.
Following variants was tested:
- load PBL to SRAM over JTAG for PLL and DDR2 initialization or configure
them with JTAG.
- load and start c
QCA AR9331 and QCA AR9344 have some similar part but different uart engines.
We need this flag to provide common debug_ll support.
Signed-off-by: Oleksij Rempel
---
arch/mips/mach-ath79/Kconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach
2017-08-01 11:13 GMT+02:00 Steffen Trumtrar :
>
> Hi!
>
> Andrey Smirnov writes:
>
>> On Sun, Jul 30, 2017 at 2:17 PM, Mabcded Babcde
>> wrote:
>>> 2017-07-28 15:42 GMT+02:00 Andrey Smirnov :
On Fri, Jul 28, 2017 at 6:24 AM, Mabcded Babcde
wrote:
> 2017-07-27 20:49 GMT+02:00 Andrey
Hi again,
after debugging a while, I found the reason:
In file bootchooser.c, in funktion bootchooser_save(..) the call of
ret = pr_setenv(bc, "%s.remaining_attempts=%d",
target->state_prefix,
target->remaining_attempts);
creates a "xxx.remaining_attempts=-1" if the
Am 31.07.2017 um 12:03 schrieb Lucas Stach:
> Am Donnerstag, den 27.07.2017, 07:00 +0200 schrieb Oleksij Rempel:
>> we need it at least for QCA AR9344
>>
>> Signed-off-by: Oleksij Rempel
>> ---
>> drivers/serial/serial_ns16550.c | 19 +--
>> 1 file changed, 17 insertions(+), 2 del
This was done using scripts/regsubst.pl.
Signed-off-by: Uwe Kleine-König
---
.../flash-header-phytec-phycore-imx7.imxcfg| 94 +++---
1 file changed, 48 insertions(+), 46 deletions(-)
diff --git
a/arch/arm/boards/phytec-phycore-imx7/flash-header-phytec-phycore-imx7.imxcf
It seems I did too much assembler stuff ...
Fixes: e7fed4338441 ("scripts: Provide script that helps using cpp defines in
dcd tables")
Signed-off-by: Uwe Kleine-König
---
scripts/regsubst.pl | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/regsubst.pl b/scripts/regsub
Import the fpga bridge framework from linux v4.10-rc2.
Signed-off-by: Steffen Trumtrar
---
drivers/Kconfig| 1 +
drivers/Makefile | 1 +
drivers/fpga/Kconfig | 24
drivers/fpga/Makefile | 6 +
drivers/fpga/fpga-bridge.c | 275 +
Signed-off-by: Steffen Trumtrar
---
include/linux/reset.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/reset.h b/include/linux/reset.h
index be0d1bb5a621..c5660f798193 100644
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -11,6 +11,8 @@ int reset_control_assert(
Signed-off-by: Steffen Trumtrar
---
common/firmware.c | 45 +-
drivers/firmware/socfpga.c | 1 +
drivers/fpga/Makefile | 2 +-
drivers/fpga/fpga-region.c | 209 +
include/firmware.h | 2 +
5 files changed, 257 insert
Import the SoCFPGA bridges drivers from linux v4.10-rc2.
Signed-off-by: Steffen Trumtrar
---
drivers/fpga/Kconfig | 8 ++
drivers/fpga/Makefile| 1 +
drivers/fpga/socfpga-fpga2sdram-bridge.c | 143
drivers/fpga/socfpga-hps2fpga
Hi!
Andrey Smirnov writes:
> On Sun, Jul 30, 2017 at 2:17 PM, Mabcded Babcde
> wrote:
>> 2017-07-28 15:42 GMT+02:00 Andrey Smirnov :
>>> On Fri, Jul 28, 2017 at 6:24 AM, Mabcded Babcde
>>> wrote:
2017-07-27 20:49 GMT+02:00 Andrey Smirnov :
> On Thu, Jul 27, 2017 at 9:20 AM, Mabcded B
Hello,
On Mon, Jul 31, 2017 at 08:20:16PM +0200, Lucas Stach wrote:
> One notable addition is support for the Turris Omnia, so you can now
> run your favorite bootloader on a nice open-hardware router.
Just for the record: Currently this only works as 2nd stage started from
the vendor U-Boot. I d
19 matches
Mail list logo