[PATCH 4/4] ARM: socfpga_defconfig: enable Altera firmware stuff

Signed-off-by: Antony Pavlov --- arch/arm/configs/socfpga_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index 6883b5f526..3a50bae8f2 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/so

[PATCH 2/4] ARM: socfpga: boards: pll_config.h: remove duplicate macros

Signed-off-by: Antony Pavlov --- arch/arm/boards/ebv-socrates/pll_config.h | 6 -- arch/arm/boards/terasic-sockit/pll_config.h | 6 -- 2 files changed, 12 deletions(-) diff --git a/arch/arm/boards/ebv-socrates/pll_config.h b/arch/arm/boards/ebv-socrates/pll_config.h index 083ebd4a87..

[PATCH 0/4] ARM: socfpga: misc fixes

Antony Pavlov (4): net: make SoCFPGA-specific designware driver work again ARM: socfpga: boards: pll_config.h: remove duplicate macros ARM: socfpga: mach/pll_config.h: add guard macro ARM: socfpga_defconfig: enable Altera firmware stuff arch/arm/boards/ebv-socrates/pll_config.h | 6

[PATCH 1/4] net: make SoCFPGA-specific designware driver work again

If MFD_SYSCON is disabled in .config then socfpga_designware_eth probe fails with this message: socfpga_designware_eth ff702000.ethernet: Could not get sysmgr-syscon node Thanks to Steffen for hint! Cc: Steffen Trumtrar Signed-off-by: Antony Pavlov --- arch/arm/configs/socfpga_defconfig | 1

[PATCH 3/4] ARM: socfpga: mach/pll_config.h: add guard macro

Signed-off-by: Antony Pavlov --- arch/arm/mach-socfpga/include/mach/pll_config.h | 4 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-socfpga/include/mach/pll_config.h b/arch/arm/mach-socfpga/include/mach/pll_config.h index 1a7e851eda..d6fb60dd24 100644 --- a/arch/arm/mach-socfp

[PATCH 3/4] ARM: i.MX6: Add cpu type for 'plus' variants

We need to distinguish between the i.MX6d/q and the i.MX6d/q plus SoC variants. Add a cpu type for them to make that possible in the next steps. Signed-off-by: Sascha Hauer --- arch/arm/boards/phytec-som-imx6/board.c | 2 +- arch/arm/boards/zii-imx6q-rdu2/lowlevel.c | 4 ++-- arch/arm/mach-i

[PATCH 4/4] clk: i.MX6: Fix enfc_sel for i.MX6dqp

The plus SoC variants have some differences in the clock controller. For now fix the NAND controller clock. There are more differences that might be relevant, but for now are left for a future excercise. Signed-off-by: Sascha Hauer --- drivers/clk/imx/clk-imx6.c | 19 ++- 1 file

[PATCH 2/4] ARM: i.MX6: factor out function to read si_rev

The i.MX6sl has another silicon revision register offset than the other i.MX6 SoCs. Finding the register is done twice. Factor out a function to get a common place to find the register. Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/include/mach/imx6.h | 61 +--

[PATCH 1/4] ARM: i.MX6: de-inline i.MX6 type detection

Having the i.MX6 type detection completely inline is less then optimal in terms of binary size. Make the detection functions non-inline. While at it ask the registers only once and store the result in a variable as the i.MX6 type is unlikely to change during runtime. Signed-off-by: Sascha Hauer -

[PATCH 0/4] Fix NAND controller clock for i.MX6plus

The i.MX6 plus SoC variants have some changes in the clock controller, start integrating them beginning with the NAND controller clock. Before doing so we have to add proper detection code for the i.MX6 plus. Sascha Hauer (4): ARM: i.MX6: de-inline i.MX6 type detection ARM: i.MX6: factor out f

[PATCH] ARM: i.MX53 TX53: remove duplicate _imx53

The pblx-y variables for the TX53 have _imx53 twice in their names. With this the names do not match the names in the FILE_* variables. This results in the make system removing the pblx files as intermediate files. Fix the names. Signed-off-by: Sascha Hauer --- images/Makefile.imx | 6 +++--- 1

[PATCH] ARM: i.MX6: phycore: Enable usbotg

The i.MX6 phyCORE boards have USBOTG support. Enable it. Signed-off-by: Sascha Hauer --- arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 4 1 file changed, 4 insertions(+) diff --git a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi index b10530c

[PATCH] clk: i.MX6: Adjust GPMI parent clock

Based on the corresponding Kernel code: The gpmi needs 100MHz frequency in the EDO/Sync mode, We can not get the 100MHz from the pll2_pfd0_352m. So choose pll2_pfd2_396m as enfc_sel's parent. Signed-off-by: Sascha Hauer --- drivers/clk/imx/clk-imx6.c | 7 +++ 1 file changed, 7 insertions(+)

Re: [PATCH 00/10] Vybrid MMDC support and misc ESDCTL fixes

On Tue, Apr 10, 2018 at 04:53:13PM -0700, Andrey Smirnov wrote: > Everyone: > > This series is a bit of code I developed to support automatic > configured DRAM size detection on Vybrid platform as well as some > small fixes/cleanup I made while looking at esdctl.c. > > All feedback is wellcome!

Re: [PATCH] ARM: start: Avoid calling arm_mem_barebox_image() twice

On Tue, Apr 10, 2018 at 04:45:36PM -0700, Andrey Smirnov wrote: > Avoid calling arm_mem_barebox_image() twice by making barebox_base > function-wide in scope > > Signed-off-by: Andrey Smirnov > --- > arch/arm/cpu/start.c | 13 + > 1 file changed, 5 insertions(+), 8 deletions(-) Appl

Re: [PATCH 1/2] i.MX: vf610-twr: Print '>' when DEBUG_LL is enabled

On Tue, Apr 10, 2018 at 04:40:37PM -0700, Andrey Smirnov wrote: > Majority of others boards prints '>' as soon as DEBUG_LL related > configuration is done, so do so for VF610-TWR as well. > > Signed-off-by: Andrey Smirnov > --- > arch/arm/boards/freescale-vf610-twr/lowlevel.c | 2 ++ > 1 file ch

Re: [PATCH] pinctrl-vf610: Make use of BIT macro

On Tue, Apr 10, 2018 at 04:39:43PM -0700, Andrey Smirnov wrote: > Signed-off-by: Andrey Smirnov > --- > drivers/pinctrl/pinctrl-vf610.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) Applied, thanks Sascha > > diff --git a/drivers/pinctrl/pinctrl-vf610.c b/drivers/pinctrl/pinct

Re: [PATCH] ARM: Make use of ALIGN_DOWN macro in barebox-arm.h

On Tue, Apr 10, 2018 at 04:38:05PM -0700, Andrey Smirnov wrote: > Signed-off-by: Andrey Smirnov > --- > arch/arm/include/asm/barebox-arm.h | 9 +++-- > 1 file changed, 3 insertions(+), 6 deletions(-) Applied, thanks Sascha > > diff --git a/arch/arm/include/asm/barebox-arm.h > b/arch/arm/

Re: [PATCH v3 04/10] ARM: add file for HYP mode related setup

On Tue, Apr 10, 2018 at 12:53:32PM +0200, Lucas Stach wrote: > Am Donnerstag, den 05.04.2018, 09:54 +0200 schrieb Sascha Hauer: > > On Mon, Mar 26, 2018 at 09:20:19PM +0200, Lucas Stach wrote: > > > This adds routines to add hyp mode vectors and switch back to HYP > > > mode from SVC. This is neede

Re: [PATCH 2/3] console: Add simplified 'serdev' framework from Linux kernel

On Mon, Apr 09, 2018 at 09:40:46AM -0700, Andrey Smirnov wrote: > On Mon, Apr 2, 2018 at 11:54 PM, Sascha Hauer wrote: > > Hi Andrey, > > > > Some comments inside. > > > > > > On Mon, Mar 26, 2018 at 06:09:14AM -0700, Andrey Smirnov wrote: > >> Port 'serdev' UART-slave deivce framework found in re

Re: [PATCH 3/3] serial: Check result of console_unregister()

Hi Andrey, On Mon, Apr 09, 2018 at 09:00:52AM -0700, Andrey Smirnov wrote: > On Tue, Apr 3, 2018 at 12:04 AM, Sascha Hauer wrote: > > On Mon, Mar 26, 2018 at 06:09:15AM -0700, Andrey Smirnov wrote: > >> In order to allow 'serdev' devices to prevent parent console device > >> removal and correspon

Re: [PATCH 1/2] i.MX53/TX53: Adjust to latest get_runtime_offset()

On Mon, Apr 09, 2018 at 06:36:36PM -0700, Andrey Smirnov wrote: > Latest version of get_runtime_offset() returns positive offset that > needs to be added to rather than substracted from original pointer. > > Cc: Michael Grzeschik > Signed-off-by: Andrey Smirnov > --- > > Sascha: > > This one o

Re: [PATCH v2] ARM: Add Advantech imx6 board support

On Mon, Apr 09, 2018 at 01:53:59PM +0200, Christoph Fritz wrote: > Add support for Advantech i.MX6 SOM named ROM-7421. > > Signed-off-by: Christoph Fritz > --- > Changes since v0: > - distinguish between MMC environment names in pr_notice() board.c > - rework eMMC partition layout and don't use