ues
responsible for that project will handle the request there.
Thanks,
Robert
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Industrial Linux Solutions | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0
ay us for writing the code
3) wait until we found enough spare time and are interested enough
do to the work at some point in the future.
rsc
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Industrial Linux Solutions | https://www.pengutronix
otherwhise-2.0-only codebase.
rsc
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Industrial Linux Solutions | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0|
Amtsgericht Hildes
om time to time. Such new versions will
> be similar in spirit to the present version, but may differ in detail to
> address new problems or concerns.
The toplevel COPYING file is a GPLv2, without "or later".
rsc
--
Pengutronix e.K. | Dipl.-Ing. Robe
make sure all necessary kernel options are enabled use:
> > $ CONFIG=/path/to/kernelconfig lxc-checkconfig
> >
> > Signed-off-by: Michael Grzeschik
>
> -WRONGMAILLIST?
Barebox Container FTW! :-)
rsc
--
Pengutronix e.K. | Di
resdb/board.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Applied, thanks
Signed-off is missing.
rsc
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Industrial Linux Solutions | https://www.pengutronix.de/ |
Peiner Str.
On Fri, Nov 24, 2017 at 08:49:22AM +, Kjell Ove Røte wrote:
> In the original case the board just reboots when the Barebox is to be loaded
> from the bootstream image.
> In log below you see that the power_prep and boot_prep is run but the Barebox
> is not started at all.
> So, in this
Hi Kjell,
On Thu, Nov 23, 2017 at 01:45:22PM +, Kjell Ove Røte wrote:
> We have a product on the Freescale imx28 booting from a NAND Flash.
> Lately we have seen high numbers of boards failing, and find we have
> received batches with marked bad blocks in lower boot addresses of
> Flash.
Is
Subject -> provide
~
On Wed, Sep 06, 2017 at 04:44:06PM +0200, Oleksij Rempel wrote:
> changes:
> v3:
> - fix compile for ppc, arm and sandbox.
>
> v2:
> - fix compile if OF is not set.
> - fix compile for x86
>
> Oleksij Rempel (4):
> of: base: port of_device_is_big_endian
Hi,
On Tue, Aug 01, 2017 at 04:02:32PM +0200, Norbert Wiedmann wrote:
> after debugging a while, I found the reason:
> In file bootchooser.c, in funktion bootchooser_save(..) the call of
>
> ret = pr_setenv(bc, "%s.remaining_attempts=%d",
> target->state_prefix,
>
On Tue, Aug 01, 2017 at 11:19:34AM +0200, Steffen Trumtrar wrote:
> Signed-off-by: Steffen Trumtrar
Could you add a more verbose patch description?
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions
On Mon, Jul 24, 2017 at 06:04:25PM +0200, Sam Ravnborg wrote:
> On Mon, Jul 24, 2017 at 11:37:07AM +0200, Robert Schwebel wrote:
> > On Mon, Jul 24, 2017 at 11:15:58AM +0200, Uwe Kleine-König wrote:
> > > This was created using cut'n'paste from the i.MX7D reference manual
>
On Mon, Jul 24, 2017 at 11:45:33AM +0200, Uwe Kleine-König wrote:
> > > + * Copyright (C) 2017 Pengutronix, Fridolin Tux
> >
> > Sure?
>
> That's what I copied from our internal license template ... *sigh* I
> will resend.
It is a *template* :-)
rsc
--
Pengutronix
On Mon, Jul 24, 2017 at 11:15:58AM +0200, Uwe Kleine-König wrote:
> This was created using cut'n'paste from the i.MX7D reference manual
> (rev 0.1, 08/2016).
>
> Signed-off-by: Uwe Kleine-König
> ---
> arch/arm/mach-imx/include/mach/imx7-ddr-regs.h | 174
>
On Tue, Jul 11, 2017 at 04:51:41PM +0200, Oleksij Rempel wrote:
> It is a fixup for fallowing patch:
^o
> | commit ef4144b4ab6301d7417af3eb4d79cfc66bf0e731
> | Date: Wed Mar 22 10:14:37 2017 +0100
> |
> |crypto: caam - fix RNG buffer cache alignmen
On Mon, Jan 16, 2017 at 12:02:47PM +0100, Belisko Marek wrote:
> > One issue remaining is that I am currently unable to reset the board
> > using the watchdog or the barebox reset command. Out of ideas, will
> > fix later.
>
> imx7 has know problem that cannot be reset by softreset only by
>
On Thu, Oct 13, 2016 at 12:11:27PM +0300, Antony Pavlov wrote:
> This patch adds initial RISC-V architecture support for barebox.
Great to see this; could you add some documentation? We have a nice
documentation framework in the meantime. Most of your cover letter could
for example go into the
ioe means "input", "output", "error", which are bits that can be set
individually.
Signed-off-by: Robert Schwebel <r.schwe...@pengutronix.de>
---
Documentation/user/networking.rst | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/user/
I asked Sascha if he still prefers patches against 'next', and it turned
out that this is not true any more and patches should be sent against
master.
Signed-off-by: Robert Schwebel <r.schwe...@pengutronix.de>
---
Documentation/user/barebox.rst | 8 +---
1 file changed, 5 insertions
On Wed, May 25, 2016 at 04:42:32PM +0200, Teresa Remmet wrote:
> Am Mittwoch, den 25.05.2016, 15:33 +0200 schrieb Robert Schwebel:
> > On Mon, May 23, 2016 at 10:25:48AM +0200, Teresa Remmet wrote:
> > > this series is more or less just a cherry-pick of the UBI patches
> >
On Mon, May 23, 2016 at 10:25:48AM +0200, Teresa Remmet wrote:
> this series is more or less just a cherry-pick of the UBI patches
> from kernel to version v4.6. Rework was need for some patches to make
> them apply and work for barebox.
These patches should have your Signed-off-by:.
rsc
--
-by: Robert Schwebel <r.schwe...@pengutronix.de>
---
Documentation/user/networking.rst | 44 ---
1 file changed, 27 insertions(+), 17 deletions(-)
diff --git a/Documentation/user/networking.rst
b/Documentation/user/networking.rst
index 6eeb93d..c1b1857
Signed-off-by: Robert Schwebel <r.schwe...@pengutronix.de>
---
Documentation/user/barebox.rst | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/user/barebox.rst b/Documentation/user/barebox.rst
index b1f06b0..530693d 100644
--- a/Documentation/user/bareb
Signed-off-by: Robert Schwebel <r.schwe...@pengutronix.de>
---
Documentation/user/barebox.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/user/barebox.rst b/Documentation/user/barebox.rst
index 00ceabb..b1f06b0 100644
--- a/Documentatio
On 'make mrproper', remove the directory hierarchy autogenerated with
'make docs'.
Signed-off-by: Robert Schwebel <r.schwe...@pengutronix.de>
---
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 73fb09b..5c5b85c 100644
--- a/Makefile
'bootm' is the lowlevel boot command, in contrast to 'boot', which is
more highlevel.
Signed-off-by: Robert Schwebel <r.schwe...@pengutronix.de>
---
Documentation/user/booting-linux.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/user/booting-lin
Fix this warning:
checking consistency...
[...]Documentation/devicetree/bindings/mtd/m25p80.rst:: WARNING: document isn't
included in any toctree
by including the document.
Signed-off-by: Robert Schwebel <r.schwe...@pengutronix.de>
---
Documentation/devicetree/index.rst | 1 +
This is a leftover from development, remove.
Signed-off-by: Robert Schwebel <r.schwe...@pengutronix.de>
---
common/ratp.c | 16 +---
1 file changed, 1 insertion(+), 15 deletions(-)
diff --git a/common/ratp.c b/common/ratp.c
index 2fef3cc..e879e2b 100644
--- a/common/ratp.c
On Mon, Feb 08, 2016 at 12:33:32PM +0100, Juergen Borleis wrote:
> On Monday 08 February 2016 11:43:13 Sascha Hauer wrote:
> > When a device probe fails the device is removed from the active list.
> > If then the device is unregistered afterwards it is removed from the
> > active list again
Hi,
I think this was somehow missing in 32900eaf7c95e52da33442b24ce91c747e700cff
and this patch should be squashed into the patch above in next.
rsc
On Tue, Jun 02, 2015 at 08:04:37PM +0200, Robert Schwebel wrote:
Without this, we get
commands/dhcp.c: In function 'do_dhcp':
commands/dhcp.c
function it appears in
scripts/Makefile.build:249: recipe for target 'commands/dhcp.o' failed
Signed-off-by: Robert Schwebel r.schwe...@pengutronix.de
---
commands/dhcp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/commands/dhcp.c b/commands/dhcp.c
index eb98bfc..0358a4c 100644
() in probe finds out the next free
bus number, so we move the output to a location where the number is
already determined.
Signed-off-by: Robert Schwebel r.schwe...@pengutronix.de
---
drivers/i2c/busses/i2c-omap.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c
Signed-off-by: Robert Schwebel r.schwe...@pengutronix.de
---
Documentation/user/booting-linux.rst | 13 +++--
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/Documentation/user/booting-linux.rst
b/Documentation/user/booting-linux.rst
index 5ef1254..ad32907 100644
On Fri, Mar 13, 2015 at 11:10:19AM +0100, Jean-Christophe PLAGNIOL-VILLARD
wrote:
On 10:54 Fri 13 Mar , Jan Lübbe wrote:
On Do, 2015-03-12 at 18:50 +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
do as in the kernel use the string as we may want to add hw IP
You mean we should add a
On Fri, Mar 13, 2015 at 09:42:22AM +0100, Jean-Christophe PLAGNIOL-VILLARD
wrote:
this will allow as example to list the current supported digest
^^ ^
Tly.
Maybe you mean
On Fri, Feb 27, 2015 at 03:04:40PM +0800, Jean-Christophe PLAGNIOL-VILLARD
wrote:
In this patch you have added barebox logo:
We have a new logo which will be available soon.
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions
Otherwhise we get this error message:
commands/built-in.o: In function `do_usbgadget':
barebox-2014.10.0/commands/usbgadget.c:77: undefined reference to
`file_list_parse'
Signed-off-by: Robert Schwebel r.schwe...@pengutronix.de
---
commands/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff
On Mon, Aug 04, 2014 at 09:11:12PM +0200, Sascha Hauer wrote:
We have an August release.
Could you upload the tarball?
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8,
On Mon, Jun 30, 2014 at 11:36:43AM -0400, Robert P. J. Day wrote:
been a while since i've build barebox for my BBB ... anyone here
doing that and can recommend a cross-compiler that's been working for
them? i know there are several out there, just curious what anyone
here is using for that
On Mon, Jun 23, 2014 at 10:42:55AM +0200, Holger Schurig wrote:
My preferred solution is to be fast enough in the bootloader
and show a splash screen under Linux only.
Hmm, I'd like to not do that. Splash screen from Linux usually means
that I need an initrd. And an initrd is seldom needed
On Thu, Jun 05, 2014 at 09:24:51PM +0200, Frederik Van Slycken wrote:
I applaud that you're working on incorporating picoTCP into barebox -
I work for the company that developed picoTCP, and so I am naturally
enthusiastic about this. However, one small thing that should be taken
into account,
Typo in subject (sabre).
rsc
On Mon, Feb 17, 2014 at 01:04:11PM +0100, Lucas Stach wrote:
Signed-off-by: Lucas Stach l.st...@pengutronix.de
---
arch/arm/dts/imx6qdl-sabresd.dtsi | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi
Hi,
here are some patches for TQMa boards.
rsc
___
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
The DTS file for MBa6x is imx6q-mba6x.dts, so it looks like this file
doesn't make any sense.
Signed-off-by: Robert Schwebel r.schwe...@pengutronix.de
---
arch/arm/dts/imx6q-tqma6x.dts | 319 --
1 file changed, 319 deletions(-)
delete mode 100644 arch/arm
Signed-off-by: Robert Schwebel r.schwe...@pengutronix.de
---
arch/arm/dts/imx6qdl-tqma6x.dtsi | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/imx6qdl-tqma6x.dtsi b/arch/arm/dts/imx6qdl-tqma6x.dtsi
index 668fa25..86d5ca7 100644
--- a/arch/arm/dts/imx6qdl-tqma6x.dtsi
+++ b/arch
The definition if the FEC is used is made by the baseboard (MBa6x), not
by the module (TQMa6x). Move it there.
Signed-off-by: Robert Schwebel r.schwe...@pengutronix.de
---
arch/arm/dts/imx6q-mba6x.dts | 4
arch/arm/dts/imx6q-tqma6x.dts | 2 +-
2 files changed, 5 insertions(+), 1 deletion
On Fri, Aug 17, 2012 at 03:07:34PM +0200, christian.buett...@rafi.de wrote:
i implemented an tftp_server for the barebox.
Please post an RFC patch here on the list in order to make a review
possible.
rsc
--
Pengutronix e.K. | |
Industrial
On Mon, Jun 25, 2012 at 02:05:37PM +0200, Sascha Hauer wrote:
The iomuxer is already initialized, only need to add the device.
Signed-off-by: Sascha Hauer s.ha...@pengutronix.de
---
arch/arm/boards/freescale-mx51-pdk/board.c |1 +
1 file changed, 1 insertion(+)
diff --git
On Mon, Jun 25, 2012 at 07:30:41PM +0200, Sascha Hauer wrote:
On Mon, Jun 25, 2012 at 06:39:30PM +0200, Robert Schwebel wrote:
On Mon, Jun 25, 2012 at 02:05:37PM +0200, Sascha Hauer wrote:
The iomuxer is already initialized, only need to add the device.
Signed-off-by: Sascha Hauer
On Mon, Mar 26, 2012 at 10:47:36AM +0200, guenter.gebha...@rafi.de wrote:
Has someone done this or can give me some advice?
We have the bcb command recently, and the functionality should be
integrated there.
rsc
--
Pengutronix e.K. | |
50 matches
Mail list logo