Signed-off-by: Rostislav Lisovy lis...@gmail.com
---
When compiled and loaded with the imx-usb-loader to RAM, the command
saveenv and loadenv do work properly (i.e. loading environment
from /dev/nand0.environment.bb). When I flash the barebox to the NAND
with the barebox_update command and reboot
Signed-off-by: Rostislav Lisovy lis...@gmail.com
---
This is a bit embarrassing but please ignore my previous email.
Everything works just fine, I was constantly flashing the old binary
without the partition table :-)
arch/arm/dts/imx53-voipac-bsb.dts | 1 +
arch/arm/dts/imx53-voipac-dmm
Device definitions is read from the devicetree description.
The board support is using 'multiboard' approach.
Signed-off-by: Rostislav Lisovy lis...@gmail.com
create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile
create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c
imx53_bbu_internal_nand_register_handler
Rostislav Lisovy (3):
ARM: dts: i.mx53: Internal keyboard controller + i2c pinmux
ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree
ARM: i.mx53: Support for Voipac board with X53-DMM-668 module.
arch/arm/boards/Makefile |1 +
arch/arm
Signed-off-by: Rostislav Lisovy lis...@gmail.com
diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi
index 09c5772..678547c 100644
--- a/arch/arm/dts/imx53.dtsi
+++ b/arch/arm/dts/imx53.dtsi
@@ -269,6 +269,14 @@
#interrupt-cells = 2
Signed-off-by: Rostislav Lisovy lis...@gmail.com
diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
index 2f31352..31fb2aa 100644
--- a/drivers/net/fec_imx.c
+++ b/drivers/net/fec_imx.c
@@ -27,6 +27,8 @@
#include linux/clk.h
#include linux/err.h
#include of_net.h
+#include of_gpio.h
Signed-off-by: Rostislav Lisovy lis...@gmail.com
diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi
index 09c5772..678547c 100644
--- a/arch/arm/dts/imx53.dtsi
+++ b/arch/arm/dts/imx53.dtsi
@@ -269,6 +269,14 @@
#interrupt-cells = 2
This patchset adds support for Voipac Baseboard using x53-dmm-668
module (equipped with i.mx53 CPU). More info about the module may
be found at: http://www.voipac.com/#X53-DMM-668
Changes since v1:
* Fixed error checking in fec_imx.c
* Board support is now done in the 'multiboard way'
Rostislav
Signed-off-by: Rostislav Lisovy lis...@gmail.com
diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
index 2f31352..9855e8c 100644
--- a/drivers/net/fec_imx.c
+++ b/drivers/net/fec_imx.c
@@ -27,6 +27,8 @@
#include linux/clk.h
#include linux/err.h
#include of_net.h
+#include of_gpio.h
Device definitions are read from the devicetree description.
The board support is using 'multiboard' approach.
Signed-off-by: Rostislav Lisovy lis...@gmail.com
create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile
create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c
On Mon, 2013-11-11 at 10:54 +0100, Sascha Hauer wrote:
On Sat, Nov 09, 2013 at 11:14:14PM +0100, Rostislav Lisovy wrote:
Hello Sascha;
On Fri, 2013-11-08 at 09:42 +0100, Sascha Hauer wrote:
Hi Rostislav,
On Tue, Nov 05, 2013 at 03:42:07PM +0100, Rostislav Lisovy wrote
)
nand -a /dev/nand0.*
erase /dev/nand0.barebox.bb
tftp /vmx53/barebox.bin /dev/nand0.barebox.bb
Thanks in advance for any suggestions.
Rostislav
On Tue, 2013-11-12 at 23:46 +0100, Rostislav Lisovy wrote:
This patchset adds support for Voipac Baseboard using x53-dmm-668
module (equipped
Hello Sascha;
On Fri, 2013-11-08 at 09:42 +0100, Sascha Hauer wrote:
Hi Rostislav,
On Tue, Nov 05, 2013 at 03:42:07PM +0100, Rostislav Lisovy wrote:
Signed-off-by: Rostislav Lisovy lis...@gmail.com
diff --git a/arch/arm/boards/freescale-mx53-vmx53/env/config
b/arch/arm/boards
Signed-off-by: Rostislav Lisovy lis...@gmail.com
diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
index 2f31352..6f883bf 100644
--- a/drivers/net/fec_imx.c
+++ b/drivers/net/fec_imx.c
@@ -27,6 +27,8 @@
#include linux/clk.h
#include linux/err.h
#include of_net.h
+#include of_gpio.h
Signed-off-by: Rostislav Lisovy lis...@gmail.com
create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile
create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c
create mode 100644 arch/arm/boards/freescale-mx53-vmx53/env/config
create mode 100644 arch/arm/boards/freescale
accepted to Linux kernel (waiting in
linux-next). The rest is the necessary hardware initialization etc. The
devices successfully initialized (and tested) are uart0 and Ethernet.
Rostislav Lisovy (3):
ARM: dts: i.mx53: Internal keyboard controller + i2c pinmux
ARM: i.mx53: Parse Reset GPIO pin
Signed-off-by: Rostislav Lisovy lis...@gmail.com
diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi
index 5c8608b..b355111 100644
--- a/arch/arm/dts/imx53.dtsi
+++ b/arch/arm/dts/imx53.dtsi
@@ -269,6 +269,14 @@
#interrupt-cells = 2
MACH_TYPE
A bit of code refactoring
Rostislav Lisovy (1):
i.MX53: vmx53: Add support for Voipac X53-DMM-668 (aka vmx53) module
arch/arm/boards/Makefile |1 +
arch/arm/boards/freescale-mx53-vmx53/Makefile |3 +
arch/arm/boards/freescale-mx53-vmx53/board.c
Signed-off-by: Rostislav Lisovy lis...@gmail.com
create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile
create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c
create mode 100644 arch/arm/boards/freescale-mx53-vmx53/env/config
create mode 100644 arch/arm/boards/freescale
at 09:22 +0200, Sascha Hauer wrote:
On Tue, Oct 01, 2013 at 11:35:19PM +0200, Rostislav Lisovy wrote:
Signed-off-by: Rostislav Lisovy lis...@gmail.com
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 325513f..b4c8228 100644
--- a/arch/arm/tools/mach-types
Hello Antony;
OK -- I should probably add my name (even if I did not change
almost anything).
Regards;
Rostislav
On Wed, 2013-10-02 at 10:15 +0400, Antony Pavlov wrote:
diff --git a/arch/arm/boards/freescale-mx53-voipac/flash_header.c
b/arch/arm/boards/freescale-mx53-voipac/flash_header.c
Signed-off-by: Rostislav Lisovy lis...@gmail.com
---
create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config
diff --git a/arch/arm/boards/freescale-mx53-voipac/env/config
b/arch/arm/boards/freescale-mx53-voipac/env/config
new file mode 100644
index 000..59432d7
--- /dev/null
Signed-off-by: Rostislav Lisovy lis...@gmail.com
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 325513f..b4c8228 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -3314,7 +3314,7 @@ dimm_imx28MACH_DIMM_IMX28
DIMM_IMX28
Signed-off-by: Rostislav Lisovy lis...@gmail.com
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 2e924fd..8070de9 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_FREESCALE_MX35_3STACK) +=
freescale-mx35-3-stack
In board.c enable UART0, NAND flash, Ethernet.
The DCD in flash_header.c is very similar (except for one line)
to that from freescale-mx53-smd
Signed-off-by: Rostislav Lisovy lis...@gmail.com
---
create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile
create mode 100644 arch/arm
(except for one line) as the one in freescale-mx53-smd.
Rostislav Lisovy (4):
i.mx53: voipac: Change machine type identifier
i.mx53: voipac: Add board specific + flash header constructing code
i.mx53: voipac: Add barebox environment configuration file
i.mx53: voipac: Modify Make- and config
to the image.
Best regards;
Rostislav Lisovy
On Fri, 2013-09-27 at 08:54 +0200, Jean-Christophe PLAGNIOL-VILLARD
wrote:
On 22:30 Thu 26 Sep , Rostislav Lisovy wrote:
Dear barebox developers and users;
I am compiling barebox for freescale-imx53-smd board. My issue is,
that the image does
Hello Sascha;
You are right; The problem is I did not use the defconfig, thus building
relocatable binary. After using freescale_mx53_smd_defconfig, proper
size value is stored in the image.
Thank you for the help;
Rostislav Lisovy
On Fri, 2013-09-27 at 10:05 +0200, Sascha Hauer wrote:
Hi
by hexdump is correct).
The barebox version I am using most recent git, branch master.
The compiler (maybe here is the point of failure) is
arm-cortex_a8-linux-gnueabi-gcc (crosstool-NG hg+default-86a8d1d467c8)
4.4.6.
I will appreciate any help;
Rostislav Lisovy
29 matches
Mail list logo