hello,
I'm using imx6 (on embedsky e9 board).
does barebox support parallel lcd on it?
I found 'imx-parallel-display' in barebox's dts, but cannot find
the driver, how can i use it?
in driver/video/imx-ipu-v3/, only hdmi and ldb, there is no
parallel lcd, isn't it?
Yi Qingliang
in barebox and in kernel, you
should check the config for barebox and kernel.
___
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
--
Nanjing Jilong
Yi Qingliang
niqingliang2...@gmail.com
On Thursday, August 29, 2013 01:35:06 PM Vanhauwaert Wouter wrote:
-Original Message-
From: Yi Qingliang [mailto:niqingliang2...@gmail.com]
Sent: donderdag 29 augustus 2013 12:44
To: barebox@lists.infradead.org
Cc: Vanhauwaert Wouter
Subject: Re: bareboxenv on userspace - wrong
On Thursday, January 10, 2013 09:36:36 AM Juergen Beisert wrote:
Hi Yi,
Yi Qingliang wrote:
I'm using barebox (based on mini2440) on my s3c2442 board,
1. flash barebox into nand: can't start normally, but can see early output
on serial.
2. load it in sdram: can start normally
On Thursday, January 10, 2013 10:14:07 AM Juergen Beisert wrote:
Hi Yi,
Yi Qingliang wrote:
On Thursday, January 10, 2013 09:36:36 AM Juergen Beisert wrote:
Yi Qingliang wrote:
I'm using barebox (based on mini2440) on my s3c2442 board,
1. flash barebox into nand
SDRAM.
the low level skipped?
On Thursday, January 10, 2013 10:14:07 AM Juergen Beisert wrote:
Hi Yi,
Yi Qingliang wrote:
On Thursday, January 10, 2013 09:36:36 AM Juergen Beisert wrote:
Yi Qingliang wrote:
I'm using barebox (based on mini2440) on my s3c2442 board,
1
On Thursday, January 10, 2013 11:00:53 AM Juergen Beisert wrote:
Hi Yi,
Yi Qingliang wrote:
On Thursday, January 10, 2013 10:14:07 AM Juergen Beisert wrote:
Yi Qingliang wrote:
On Thursday, January 10, 2013 09:36:36 AM Juergen Beisert wrote:
Yi Qingliang wrote:
I'm
!
Nanjing Jilong
Yi Qingliang
___
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
kernel, (use 'bootz /dev/nand0.kernel.bb' can
boot the kernel).
any idea? thanks!
Yi Qingliang
Nanjing Jilong
___
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
is 16bit.
any suggestion?
On Thursday, December 06, 2012 09:09:10 AM Juergen Beisert wrote:
Yi Qingliang wrote:
the address of dm9000 is 0x2800, it should be cs5, but in function
mini2440_devices_init, it set the cs4 instead, why??
Hmm, the schematics of the Mini2440 board tells me
On Thursday, December 06, 2012 12:27:45 PM Eric Bénard wrote:
Hi,
Le Thu, 06 Dec 2012 15:55:23 +,
Yi Qingliang niqingliang2...@gmail.com a écrit :
the address of dm9000 is 0x2800, it should be cs5, but in function
mini2440_devices_init, it set the cs4 instead, why
.
and if not connect jtager, and use ON/OFF switch, everyghing OK.
what's the fuck problem?
On Thursday, December 06, 2012 09:09:10 AM Juergen Beisert wrote:
Yi Qingliang wrote:
the address of dm9000 is 0x2800, it should be cs5, but in function
mini2440_devices_init, it set the cs4 instead, why
and if connected jtager, the ON switch does not work some time.
of cause the jtagger is connected to PC, but I have not use it with 'openocd'.
On Thursday, December 06, 2012 09:09:10 AM Juergen Beisert wrote:
Yi Qingliang wrote:
the address of dm9000 is 0x2800, it should be cs5
the address of dm9000 is 0x2800, it should be cs5, but in function
mini2440_devices_init, it set the cs4 instead, why??
Yi Qingliang
Nanjing Jilong
___
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman
14 matches
Mail list logo
