This adds OP-TEE support for the TQMa6ulx board. The OP-TEE binary is
loaded from PBL. Later on in barebox proper the OP-TEE provided overlay
node is applied to the barebox live tree for barebox to probe OP-TEE and
also to reserve the memory used by OP-TEE. The overlay is also
registered as a fixup to be applied on the Linux device tree.
Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
---
arch/arm/boards/tqma6ulx/board.c | 64 ++++++++++++++++---
.../flash-header-imx6ul-tqma6ulx.imxcfg | 3 +
arch/arm/boards/tqma6ulx/lowlevel.c | 26 +++++++-
arch/arm/boards/tqma6ulx/tqma6ulx.h | 14 ++++
firmware/Kconfig | 5 ++
firmware/Makefile | 1 +
6 files changed, 102 insertions(+), 11 deletions(-)
create mode 100644 arch/arm/boards/tqma6ulx/tqma6ulx.h
diff --git a/arch/arm/boards/tqma6ulx/board.c b/arch/arm/boards/tqma6ulx/board.c
index 378cadc018..312bb9f585 100644
--- a/arch/arm/boards/tqma6ulx/board.c
+++ b/arch/arm/boards/tqma6ulx/board.c
@@ -12,6 +12,61 @@
#include <of.h>
#include <string.h>
#include <linux/clk.h>
+#include <asm/optee.h>
+#include <asm-generic/memory_layout.h>
+
+#include "tqma6ulx.h"
+
+static const struct of_device_id mba6ulx_of_match[] = {
+ { .compatible = "tq,imx6ul-tqma6ul2l" },
+ { .compatible = "tq,imx6ul-tqma6ul2" },
+ { .compatible = "tq,imx6ull-tqma6ull2" },
+ { .compatible = "tq,imx6ull-tqma6ull2l" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mba6ulx_of_match);
+
+#ifdef CONFIG_FIRMWARE_TQMA6UL_OPTEE
+
+static int mba6ulx_optee_fixup(void)
+{
+ struct device_node *overlay;
+ struct fdt_header *fdt;
+ struct device_node *root = of_get_root_node();
+ int ret;
+
+ if (!of_match_node(mba6ulx_of_match, root))
+ return 0;
+
+ fdt = (void*)OPTEE_OVERLAY_LOCATION;
+ overlay = of_unflatten_dtb(fdt, INT_MAX);
+
+ if (IS_ERR(overlay))
+ return PTR_ERR(overlay);
+
+ /* register the overlay for fixing up the kernel device tree */
+ ret = of_register_overlay(overlay);
+ if (ret) {
+ printf("cannot apply oftree overlay: %s\n", strerror(-ret));
+ goto err;
+ }
+
+ /*
+ * Apply the overlay to the live tree to enable OP-TEE support
+ * for barebox and to reserve the SDRAM regions occupied by
+ * OP-TEE
+ */
+ of_overlay_apply_tree(root, overlay);
+
+ return 0;
+err:
+ of_delete_node(overlay);
+
+ return ret;
+}
+postcore_initcall(mba6ulx_optee_fixup);
+
+#endif
static int mba6ulx_probe(struct device *dev)
{
@@ -39,15 +94,6 @@ static int mba6ulx_probe(struct device *dev)
return 0;
}
-static const struct of_device_id mba6ulx_of_match[] = {
- { .compatible = "tq,imx6ul-tqma6ul2l" },
- { .compatible = "tq,imx6ul-tqma6ul2" },
- { .compatible = "tq,imx6ull-tqma6ull2" },
- { .compatible = "tq,imx6ull-tqma6ull2l" },
- { /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, mba6ulx_of_match);
-
static struct driver mba6ulx_board_driver = {
.name = "board-mba6ulx",
.probe = mba6ulx_probe,
diff --git a/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg
b/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg
index 9c9fb33743..ac4b853ced 100644
--- a/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg
+++ b/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg
@@ -99,4 +99,7 @@ wm 32 0x021B0004 0x0002552D /* MMDC0_MDPDC now SDCTL power
down enabled */
wm 32 0x021B0404 0x00011006 /* MMDC0_MAPSR ADOPT power down enabled */
wm 32 0x021B001C 0x00000000 /* MMDC0_MDSCR, clear this register (especially
the configuration bit as initialization is complete) */
+/* Disable TZASC bypass */
+wm 32 0x020E4024 0x00000001
+
#include <mach/imx/habv4-imx6-gencsf.h>
diff --git a/arch/arm/boards/tqma6ulx/lowlevel.c
b/arch/arm/boards/tqma6ulx/lowlevel.c
index 909bdc532e..5fd997d2ec 100644
--- a/arch/arm/boards/tqma6ulx/lowlevel.c
+++ b/arch/arm/boards/tqma6ulx/lowlevel.c
@@ -15,6 +15,9 @@
#include <asm/cache.h>
#include <pbl/i2c.h>
#include <boards/tq/tq_eeprom.h>
+#include <tee/optee.h>
+
+#include "tqma6ulx.h"
extern char __dtb_z_imx6ul_tqma6ul2_mba6ulx_start[];
extern char __dtb_z_imx6ul_tqma6ul2l_mba6ulx_start[];
@@ -63,14 +66,33 @@ static void *read_eeprom(void)
return fdt;
}
-static void noinline start_mba6ulx(void)
+static void noinline start_mba6ulx(u32 r0)
{
void *fdt;
+ int tee_size;
+ void *tee;
setup_uart();
fdt = read_eeprom();
+ /* Enable normal/secure r/w for TZC380 region0 */
+ writel(0xf0000000, 0x021D0108);
+
+ /*
+ * Chainloading barebox will pass a device tree within the RAM in r0,
+ * skip OP-TEE early loading in this case
+ */
+ if (IS_ENABLED(CONFIG_FIRMWARE_TQMA6UL_OPTEE) &&
+ !(r0 > MX6_MMDC_P0_BASE_ADDR &&
+ r0 < MX6_MMDC_P0_BASE_ADDR + SZ_256M)) {
+ get_builtin_firmware(mba6ul_optee_bin, &tee, &tee_size);
+
+ memset((void *)OPTEE_OVERLAY_LOCATION, 0, 0x1000);
+
+ start_optee_early(NULL, tee);
+ }
+
imx6ul_barebox_entry(fdt);
}
@@ -90,5 +112,5 @@ ENTRY_FUNCTION(start_imx6ul_mba6ulx, r0, r1, r2)
setup_c();
barrier();
- start_mba6ulx();
+ start_mba6ulx(r0);
}
diff --git a/arch/arm/boards/tqma6ulx/tqma6ulx.h
b/arch/arm/boards/tqma6ulx/tqma6ulx.h
new file mode 100644
index 0000000000..843ad00d31
--- /dev/null
+++ b/arch/arm/boards/tqma6ulx/tqma6ulx.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * tqma6ulx.h - common defines between OP-TEE and barebox
+ *
+ * Copyright (c) 2019 Rouven Czerwinski <r.czerwin...@pengutronix.de>,
Pengutronix
+ *
+ */
+#ifndef __TQMA6ULX_H_
+#define __TQMA6ULX_H_
+
+/* MX6UL_MMDC_PORT0_BASE_ADDR + SZ_64M */
+#define OPTEE_OVERLAY_LOCATION 0x84000000
+
+#endif // __TQMA6ULX_H_
diff --git a/firmware/Kconfig b/firmware/Kconfig
index 9d4be855f9..d2b1a5db03 100644
--- a/firmware/Kconfig
+++ b/firmware/Kconfig
@@ -85,6 +85,11 @@ config FIRMWARE_IMX93_OPTEE
CONFIG_EXTRA_FIRMWARE_DIR/mx93a1-ahab-container.img. You can obtain
it from
https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-ele-imx-0.1.0.bin
+config FIRMWARE_TQMA6UL_OPTEE
+ bool
+ depends on MACH_TQMA6UL && PBL_OPTEE
+ default y
+
config FIRMWARE_CCBV2_OPTEE
bool
depends on MACH_WEBASTO_CCBV2 && PBL_OPTEE
diff --git a/firmware/Makefile b/firmware/Makefile
index 1409d7a804..83ce77f510 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -35,6 +35,7 @@ firmware-$(CONFIG_ARCH_LAYERSCAPE_PPA) += ppa-ls1046a.bin
fw-external-$(CONFIG_FIRMWARE_LS1028A_ATF) += ls1028a-bl31.bin
pbl-firmware-$(CONFIG_FIRMWARE_CCBV2_OPTEE) += ccbv2_optee.bin
+pbl-firmware-$(CONFIG_FIRMWARE_TQMA6UL_OPTEE) += mba6ul_optee.bin
# Create $(fwdir) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
# leading /, it's relative to $(srctree).
--
2.39.2
