ay
P.O.Box 1068 Bekkajordet, NO-3194 Horten, Norway
Switchboard: +47 4000 2500
www.zenitel.com
-Original Message-
From: Robert Schwebel [mailto:rob...@schwebel.de]
Sent: torsdag 30. november 2017 22.44
To: Kjell Ove Røte
Cc: barebox@lists.infradead.org
Subject: Re: FW: Handling boot o
On Fri, Nov 24, 2017 at 08:49:22AM +, Kjell Ove Røte wrote:
> In the original case the board just reboots when the Barebox is to be loaded
> from the bootstream image.
> In log below you see that the power_prep and boot_prep is run but the Barebox
> is not started at all.
> So, in this case
: Re: FW: Handling boot on NAND Bad Blocks
Hi Kjell,
On Thu, Nov 23, 2017 at 01:45:22PM +, Kjell Ove Røte wrote:
> We have a product on the Freescale imx28 booting from a NAND Flash.
> Lately we have seen high numbers of boards failing, and find we have
> received batches with marked b
Hi Kjell,
On Thu, Nov 23, 2017 at 01:45:22PM +, Kjell Ove Røte wrote:
> We have a product on the Freescale imx28 booting from a NAND Flash.
> Lately we have seen high numbers of boards failing, and find we have
> received batches with marked bad blocks in lower boot addresses of
> Flash.
Is i
Hi
We have a product on the Freescale imx28 booting from a NAND Flash.
Lately we have seen high numbers of boards failing, and find we have received
batches with marked bad blocks in lower boot addresses of Flash.
Typically we see bad blocks in partition where Barebox are located.
We do also us