Re: Problems with pyhBoard-Wega-AM335x

2014-07-22 Thread Holger Schurig
* For NAND support it is important to enable *CONFIG_BUS_OMAP_GPMC* If this is something that is mandatory for the board, maybe the board should then select it in the Kconfig? ___ barebox mailing list barebox@lists.infradead.org

Re: Problems with pyhBoard-Wega-AM335x

2014-07-21 Thread Frede Florian
Hello... now I have a working Barebox 2014.07 on the pyhCore... * I used the attached configuration * Generated a patch to the git (commit 9d7b0ba957a665d6013c4fa53df04ac324618a40) * For NAND support it is important to enable *CONFIG_BUS_OMAP_GPMC* after that the Barebox starts and

Re: Problems with pyhBoard-Wega-AM335x

2014-07-09 Thread Rolf Evers-Fischer
Hello Florian, On Tue, 8 Jul 2014, Teresa Gamez wrote: Hello Florian, I guess you having the default kit WEGA, which does have 256MB RAM. The mainline supported phyCORE Kit does have 512MB. Thats probably why it does not start up. I'll have a look at it. Teresa I'm not 100% sure,

Re: Problems with pyhBoard-Wega-AM335x

2014-07-09 Thread Frede Florian
Hello Rolf, after I apply the Patch from Teresa I got the . Yes the last barebox worked. Yesterday I configured the new barebox in the same way as the old one and got the the size of my image is only 93260 bytes so it should work but it do not work. So I will spend no more time with the

Re: Problems with pyhBoard-Wega-AM335x

2014-07-08 Thread Frede Florian
Hello Rolf, Hello Sascha, I tried your hints... but I don't get the prompt after a while my Desktop-PC say that a Ethernet connection is established thats all I can not ping or connect to the pyhBoard-Wega-AM335x. But nothing is transmitted on the Evaluation Board (PEB-EVAL-01). Do I need

Re: Problems with pyhBoard-Wega-AM335x

2014-07-08 Thread Teresa Gamez
Hello Florian, I guess you having the default kit WEGA, which does have 256MB RAM. The mainline supported phyCORE Kit does have 512MB. Thats probably why it does not start up. I'll have a look at it. Teresa Am Dienstag, den 08.07.2014, 11:29 +0200 schrieb Frede Florian: Hello Rolf, Hello

Re: Problems with pyhBoard-Wega-AM335x

2014-07-07 Thread Frede Florian
Hello Rolf, I used this Option already, but to be sure that there is no mistake I reconfigured the Barebox and Barebox_MLO again and use the new Version 2014.07.0. The result is the same. LD images/start_am33xx_phytec_phycore_sram.pbl arch/arm/boards/built-in-pbl.o: In function

Re: Problems with pyhBoard-Wega-AM335x

2014-07-07 Thread Rolf Evers-Fischer
Hello Florian, On Mon, 7 Jul 2014, Florian Frede wrote: Hello Rolf, I used this Option already, but to be sure that there is no mistake I reconfigured the Barebox and Barebox_MLO again and use the new Version 2014.07.0. The result is the same. I also attached the config files may be

Re: Problems with pyhBoard-Wega-AM335x

2014-07-07 Thread Frede Florian
Hello Rolf, thank you very much... after I selected the mentioned entry in the menu the problem was solved... but the board do not prompt any thing on the UART1... so I do not know if barebox is loaded from the sd-card or not... Regards Florian Am 07.07.2014 12:05, schrieb Rolf

Re: Problems with pyhBoard-Wega-AM335x

2014-07-07 Thread Sascha Hauer
On Mon, Jul 07, 2014 at 01:14:35PM +0200, Frede Florian wrote: Hello Rolf, thank you very much... after I selected the mentioned entry in the menu the problem was solved... but the board do not prompt any thing on the UART1... so I do not know if barebox is loaded When using mainline

Re: Problems with pyhBoard-Wega-AM335x

2014-07-07 Thread Robert P. J. Day
On Mon, 7 Jul 2014, Sascha Hauer wrote: On Mon, Jul 07, 2014 at 01:14:35PM +0200, Frede Florian wrote: Hello Rolf, thank you very much... after I selected the mentioned entry in the menu the problem was solved... but the board do not prompt any thing on the UART1... so I do not know

Re: Problems with pyhBoard-Wega-AM335x

2014-07-07 Thread Sascha Hauer
On Mon, Jul 07, 2014 at 08:04:55AM -0400, Robert P. J. Day wrote: On Mon, 7 Jul 2014, Sascha Hauer wrote: On Mon, Jul 07, 2014 at 01:14:35PM +0200, Frede Florian wrote: Hello Rolf, thank you very much... after I selected the mentioned entry in the menu the problem was solved...

Re: Problems with pyhBoard-Wega-AM335x

2014-07-07 Thread Rolf Evers-Fischer
Hello Florian, Sascha Hauer s.ha...@pengutronix.de hat am 7. Juli 2014 um 14:00 geschrieben: On Mon, Jul 07, 2014 at 01:14:35PM +0200, Frede Florian wrote: Hello Rolf, thank you very much... after I selected the mentioned entry in the menu the problem was solved... but the board do

Problems with pyhBoard-Wega-AM335x

2014-07-04 Thread Frede Florian
Hello, I like to update from barebox 2013.11 to barebox 2014.06.0 with the phyBoard-Wega-AM335x. After reconfigure the barebox I get the error: LD images/start_am33xx_phytec_phycore_sram.pbl arch/arm/boards/built-in-pbl.o: In function `pcm051_board_init':

Re: Problems with pyhBoard-Wega-AM335x

2014-07-04 Thread Rolf Evers-Fischer
Hi Florian, On Fri, Jul 04, 2014 at 12:12, Florian Wrede wrote: I like to update from barebox 2013.11 to barebox 2014.06.0 with the phyBoard-Wega-AM335x. After reconfigure the barebox I get the error: LD images/start_am33xx_phytec_phycore_sram.pbl arch/arm/boards/built-in-pbl.o: