Hi,
> > It is a direct replacement for at91bootstrap and loads barebox as the
> > next step bootloader.
> The above is entirely correct - as the barebox variant supports booting from
> SD card only, where at91bootstrap support additional boot sources.
So, I quickly built the bootstrap for A9263
Hi all.
Correcting myself here.
> >
> > Super interesting about the A9263 setup code. I missed it so far. Does
> > that mean that barebox can replace the at91bootstrap?
> Yes. The patch series I pointed at generates a bare variant that I
> successfully used to boot my board direct from ROMBOOT.
Hi Wolfram.
On Tue, Mar 21, 2023 at 06:20:45PM +0100, Wolfram Sang wrote:
> Hi Sascha!
>
> > Nice to hear from you here ;)
>
> Yeah, it has been only 10 years... :)
>
> > I have no idea how the SDRAM setup is done on the USB-A9G20. There seems
> > to be SDRAM setup code for the USB-A9263, but
Hi Sascha!
> Nice to hear from you here ;)
Yeah, it has been only 10 years... :)
> I have no idea how the SDRAM setup is done on the USB-A9G20. There seems
> to be SDRAM setup code for the USB-A9263, but not for the USB-A9G20. Is
> there some AT91Bootstrap required?
Yes. There is a bootstrap
Hi Alexander.
On Tue, Mar 21, 2023 at 10:44:25AM +0100, Alexander Dahl wrote:
> Hello Sascha,
>
> Am Tue, Mar 21, 2023 at 09:58:48AM +0100 schrieb Sascha Hauer:
> > Hi Wolfram,
> >
> > Nice to hear from you here ;)
> >
> > On Sun, Mar 19, 2023 at 10:28:07PM +0100, Wolfram Sang wrote:
> > > Hi
Linux v6.3-rc1 renamed the zynq macb compatibles from cdns,zynq-gem to
xlnx,zynq-gem and cdns,zynqmp-gem to xlnx,zynqmp-gem. Adjust the
compatibles in the driver accordingly.
Signed-off-by: Sascha Hauer
---
drivers/net/macb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
We have different driver specific variants of functions polling for the
device ready in the tree. Add a common sdhci_wait_for_done() and use
it where appropriate. This fixes a few deficiencies with the driver
specific variants.
rk_sdhci_wait_for_done() didn't check the SDHCI_INT_TIMEOUT bit and
Hello Sascha,
Am Tue, Mar 21, 2023 at 09:58:48AM +0100 schrieb Sascha Hauer:
> Hi Wolfram,
>
> Nice to hear from you here ;)
>
> On Sun, Mar 19, 2023 at 10:28:07PM +0100, Wolfram Sang wrote:
> > Hi Sam,
> >
> > > It is only a few weeks ago I argued that there was no users of the older
> > >
Hi Wolfram,
Nice to hear from you here ;)
On Sun, Mar 19, 2023 at 10:28:07PM +0100, Wolfram Sang wrote:
> Hi Sam,
>
> > It is only a few weeks ago I argued that there was no users of the older
> > at91sam* boards, and then you prove me wrong here.
>
> At your service ;)
>
> > I will try to
On Mon, Mar 20, 2023 at 12:41:23PM +0100, Roland Hieber wrote:
> Signed-off-by: Roland Hieber
> ---
> Documentation/boards/imx.rst | 15 +++
> 1 file changed, 11 insertions(+), 4 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/Documentation/boards/imx.rst
On Sun, Mar 19, 2023 at 04:39:31PM +0100, Wolfram Sang wrote:
> Signed-off-by: Wolfram Sang
> ---
> commands/Kconfig | 4 +++-
> commands/nand.c | 2 +-
> 2 files changed, 4 insertions(+), 2 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/commands/Kconfig b/commands/Kconfig
> index
On Sun, Mar 19, 2023 at 04:39:11PM +0100, Wolfram Sang wrote:
> Signed-off-by: Wolfram Sang
> ---
> commands/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks
Sascha
>
> diff --git a/commands/Kconfig b/commands/Kconfig
> index ec15f4e543..27769950d9 100644
> ---
On Fri, Mar 17, 2023 at 01:19:37PM +0100, Johannes Zink wrote:
> Barebox automatically fixes up several properties to the root and
> chosen node of the device tree passed to the booted system.
>
> These entries contain information about the hardware, reset source
> and the barebox version string.
On Thu, Mar 16, 2023 at 02:42:07PM +0100, Oleksij Rempel wrote:
> The required functionality is essential for cable hot plugging or
> asynchronous link detection. In its current state, DSA will only operate
> if the cable was connected prior to booting.
>
> Signed-off-by: Oleksij Rempel
> ---
>
On Mon, Mar 20, 2023 at 04:43:08PM +0100, Ahmad Fatoum wrote:
> On 20.03.23 16:29, Sascha Hauer wrote:
> > Registering drivers is one thing, getting rid of them another. Add
> > unregister_driver() which is used in the coming USB gadget update.
> >
> > Signed-off-by: Sascha Hauer
> > ---
> >
15 matches
Mail list logo
