Hi Andreas,
I remember, that the bareos packages I installed from the official FreeBSD
ports came with a note saying, that I should change some default settings
or else the tape positioning would not work correctly. Two EOF was one of
them. Among others I also set the minimum block size because
Hi Benedict,
looking at your configuration there are two parameters where I don't
unterstand why you set them.
Do you have any special requirement for "Two EOF"? Usually that
parameter is not needed.
Why did you set Minimum Block size to 64k? The default is 63k and
usually there is no need to
Hi Andreas,
thank you for the swift answer.
I did try backing up to file storage, both on ZFS and UFS. Restoring from
this worked absolutely fine.
This is my device resource for the tape drive:
Device {
Name = "Ultrium"
Always Open = yes
Archive Device = "/dev/nsa0"
Auto Changer = no
Hi Benedict,
Am 13.12.22 um 16:34 schrieb Benedict Ecker (Bene):
However when I am starting a restore job, I encounter problems. The
operation aborts with the error message "Volume data error! Block
checksum mismatch!".
Thats bad. And - unless you wrote your tapes with a version affected by
Hey everyone!
I have encountered problems when restoring from LTO Tapes.
Making backups and storing them on the tapes is working absolutely fine. No
problems here. Writing and reading with tar directly to and from the tapes
is also working fine.
However when I am starting a restore job, I enc