Am Samstag 09 Februar 2008 schrieb Michael Buesch:
> +static void b43_print_driverinfo(void)
> +{
> + const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
> +*feat_leds = "", *feat_rfkill = "";
> +
> +#ifdef CONFIG_B43_PCI_AUTOSELECT
> + feat_pci = "P";
> +#endif
>
This adds printk messages with basic information about the driver being loaded.
This information includes a summary of the compiled-in features, which
simplifies bug-reporting and debugging a lot.
Also a firmware ID is printed. This is a unique identifier blob for a specific
version of the firmware
glenn greenfield wrote:
> eth0: no link during initialization.
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> ADDRCONF(NETDEV_UP): wlan0: link is not ready
> lp: driver loaded but no devices found
> ppdev: user-space parallel
On Feb 7, 2008 6:39 PM, Larry Finger <[EMAIL PROTECTED]> wrote:
>
> glenn greenfield wrote:
> > Debian Sid 64 bit
> > AMD64 X2
> > Kernel 2.6.24-smp w/ 4311_2 patch applied from here:
> > http://linuxwireless.org/download/b43/patch_2.6.24_for_4311_2
> >
> > lspci
> > 03:00.0 Network controller: Bro
This adds printk messages with basic information about the driver being loaded.
This information includes a summary of the compiled-in features, which
simplifies bug-reporting and debugging a lot.
Also a firmware ID is printed. This is a unique identifier blob for a specific
version of the firmware
Am Freitag 08 Februar 2008 schrieb Michael Buesch:
> On Friday 08 February 2008 07:45:37 Brian Lavender wrote:
> > I downloaded the 2.6.24 kernel onto ubuntu gutsy, compiled it, installed
> > the firmware, but I can't seem to make a connection. The bmc43xx driver
> > seems to work, but disconnects
On Friday 08 February 2008 17:17:10 Guillaume wrote:
> Stefano Brivio a écrit :
>
> > Sure. You must go to
> > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download
> > the correct firmware (version 4). Does this ring a bell?
>
> OK ; it's done and it work :-P
> I have made a
Stefano Brivio a écrit :
> Sure. You must go to
> http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download
> the correct firmware (version 4). Does this ring a bell?
OK ; it's done and it work :-P
I have made a mistake because the two diods of my card are no longer
lighted...
G
On Fri, 8 Feb 2008 16:41:59 +0100 (CET)
"bou.gui" <[EMAIL PROTECTED]> wrote:
> And dmesg says :
> [ 118.782933] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or
> load failed.
> [ 118.782943] b43-phy0 ERROR: You must go to
> http://linuxwireless.org/en/users/Drivers/b43#devicefirmwa
Hi every one.
Since i have upgraded my Ubuntu to the lateste Hardy version of yesterday, i
cannot use my PCMCIA BEWAN Wi-Fi card...
Before, it worked very good with bcm43xx-fwcutter, but now...
lspci says :
Broadcom Corporation BCM4306
I've tried to use http://linuxwireless.org/en/users/Driver
On Friday 08 February 2008 07:45:37 Brian Lavender wrote:
> I downloaded the 2.6.24 kernel onto ubuntu gutsy, compiled it, installed the
> firmware, but I can't seem to make a connection. The bmc43xx driver
> seems to work, but disconnects for some reason. I noticed that while
> trying to set the W
11 matches
Mail list logo