Replace TODOs based on old specs with more current ones.
From 328cf91018178723574031585b447bb849ccddba Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zaj...@gmail.com>
Date: Tue, 5 Jan 2010 20:35:48 +0100
Subject: [PATCH 1/2] b43: N-PHY: update TODOs in init part
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zaj...@gmail.com
---
drivers/net/wireless/b43/phy_n.c | 71 ++++++++++++++++++++++++-------------
drivers/net/wireless/b43/phy_n.h | 12 ++++++
2 files changed, 58 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 015da44..6479d6e 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -425,8 +425,10 @@ int b43_phy_initn(struct b43_wldev *dev)
struct ssb_bus *bus = dev->dev->bus;
struct b43_phy *phy = &dev->phy;
struct b43_phy_n *nphy = phy->n;
+ u8 tx_pwr_state;
u16 tmp;
enum ieee80211_band tmp2;
+ bool do_rssi_cal;
u16 clip[2];
bool do_cal = false;
@@ -503,35 +505,54 @@ int b43_phy_initn(struct b43_wldev *dev)
}
b43_nphy_workarounds(dev);
- b43_nphy_reset_cca(dev);
- ssb_write32(dev->dev, SSB_TMSLOW,
- ssb_read32(dev->dev, SSB_TMSLOW) | B43_TMSLOW_MACPHYCLKEN);
+ //TODO N PHY BMAC Clock FGC with argument 1
+ b43_nphy_reset_cca(dev);
+ //TODO N PHY BMAC Clock FGC with argument 0
+ //TODO N PHY MAC PHY Clock Set with argument 1
+ //TODO Disable PA Override
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
+ //TODO Turn on PA override
+ //TODO N PHY Classifier with arguments 0 and 0
+ //TODO N PHY Det Clip with 0 and the clip array as arguments
+ tx_pwr_state = nphy->txpwrctrl;
+ //TODO N PHY TX power control with argument 0 (turning off power
control)
+ //TODO Fix the TX Power Settings
+ //TODO N PHY TX Power Control Idle TSSI
+ //TODO N PHY TX Power Control Setup
+
+ if (phy->rev >= 3) {
+ //TODO
+ } else {
+ //TODO Write an N PHY table with ID 26, length 128, offset 192,
width 32, and the data from Rev 2 TX Power Control Table
+ //TODO Write an N PHY table with ID 27, length 128, offset 192,
width 32, and the data from Rev 2 TX Power Control Table
+ }
+
+ if (nphy->phyrxchain != 3)
+ //TODO N PHY RX Core Set State with phyrxchain as argument
+ if (nphy->mphase_cal_phase_id > 0)
+ //TODO PHY Periodic Calibration Multi-Phase Restart
+
+ do_rssi_cal = false;
+ if (phy->rev >= 3) {
+ //TODO
+ } else {
+ //TODO
+ }
+
+ if (!((nphy->measure_hold & 0x6) != 0)) {
+ //TODO
+ }
- b43_phy_read(dev, B43_NPHY_CLASSCTL); /* dummy read */
- //TODO read core1/2 clip1 thres regs
-
- if (1 /* FIXME Band is 2.4GHz */)
- b43_nphy_bphy_init(dev);
- //TODO disable TX power control
- //TODO Fix the TX power settings
- //TODO Init periodic calibration with reason 3
- b43_nphy_rssi_cal(dev, 2);
- b43_nphy_rssi_cal(dev, 0);
- b43_nphy_rssi_cal(dev, 1);
- //TODO get TX gain
- //TODO init superswitch
- //TODO calibrate LO
- //TODO idle TSSI TX pctl
- //TODO TX power control power setup
- //TODO table writes
- //TODO TX power control coefficients
- //TODO enable TX power control
- //TODO control antenna selection
- //TODO init radar detection
- //TODO reset channel if changed
+ //TODO N PHY TX Power Control Coef Setup
+ //TODO N PHY TX Power Control Enable with argument tx_pwr_state
+ b43_phy_write(dev, B43_NPHY_TXMACIF_HOLDOFF, 0x0015);
+ b43_phy_write(dev, B43_NPHY_TXMACDELAY, 0x0320);
+ if (phy->rev >= 3 && phy->rev <= 6)
+ b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x0014);
+ //TODO N PHY TX LP FBW
+ //TODO N PHY Spur Workaround
b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
return 0;
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 8f174b7..e5e402a 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -925,7 +925,19 @@
struct b43_wldev;
struct b43_phy_n {
+ u8 txpwrctrl;
+ u8 measure_hold;
+ u8 phyrxchain;
+ u8 mphase_cal_phase_id;
u32 deaf_count;
+ bool mute;
+
+ u8 iqcal_chanspec_2G;
+ u8 rssical_chanspec_2G;
+
+ u8 iqcal_chanspec_5G;
+ u8 rssical_chanspec_5G;
+
bool crsminpwr_adjusted;
bool noisevars_adjusted;
--
1.6.4.2
0001-b43-N-PHY-update-TODOs-in-init-part.patch
Description: Binary data
_______________________________________________ Bcm43xx-dev mailing list Bcm43xx-dev@lists.berlios.de https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
