Re: [beagleboard] Re: Latest image Angstrom Distribution BBB 2GB eMMC 2013-09-04 reports as Angstrom v2012.12?

From: Reply-To: Date: Friday, February 21, 2014 at 10:51 PM To: Subject: [beagleboard] Re: Latest image Angstrom Distribution BBB 2GB eMMC 2013-09-04 reports as Angstrom v2012.12? > Hi Bruce :) I am having the same issue. > Do you have a solution? > Regards Andrew If you want the latest A

Re: [beagleboard] PRUSS and accessing ADC registers on Beaglebone Black

From: Nhan Nguyen Reply-To: Date: Saturday, February 22, 2014 at 5:40 PM To: Subject: Re: [beagleboard] PRUSS and accessing ADC registers on Beaglebone Black > Hi Charles, > > Thank you very much for your answer. I manage to access it after enable ADC > using 'echo BB-ADC > /sys/devices

Re: [beagleboard] HDMI support for 1600:900 @60Hz -No Audio Needed -How do I provide full video bandwidth Pls. Advise

1920x1080@24 works fine. @60, well, that is not possible. Gerald On Sat, Feb 22, 2014 at 5:45 PM, Nick Smith wrote: > Hi, > 1. I cannot find any information on the 16:9 formatted > displays for 1600:900 lcd displays. The datasheet for the HDMI controller > chip TDA19988 > is ver

Re: [beagleboard] servo?

The limit is based on typical applications and the current rating of the pin and the etch on the PCB. There are no electronics that could prevent you from pulling 100A form a supply if it can provide that much. However, I would expect the etch on the PCB to be fried if you did that with smoke along

Re: [beagleboard] BBB as EtherCAT slave?

The pins for Ethercat are not supported on the BBB. Also. The Ethercat is removed in the AM3358 processor, the one used on the latest revision. Gerald On Sat, Feb 22, 2014 at 3:18 AM, GreedyGoblin wrote: > Hello All, > I know that AM335x processor has hardware support to build an EtherCAT > sl

[beagleboard] HDMI support for 1600:900 @60Hz -No Audio Needed -How do I provide full video bandwidth Pls. Advise

Hi, 1. I cannot find any information on the 16:9 formatted displays for 1600:900 lcd displays. The datasheet for the HDMI controller chip TDA19988 is very allusive for some reason, got my hands on the TDA19983 data sheet though 2. I did my calculations 1600x900x60Hz

Re: [beagleboard] Re: Hide (or disable) Angstrom login screen

I also am using a BBB and need to auto login and use Qt. Could you provide some code on how launch Qt and bypass the login? On Thursday, August 9, 2012 6:38:37 AM UTC-6, Brent wrote: > > That worked. Thanks! > > On Thursday, August 9, 2012 3:26:41 AM UTC-4, JB.L wrote: > >> Actually, since it se

Re: [beagleboard] servo?

Not sure that is strictly true. Vdd_5v (p9_5/6) supports up to 1amp current draw when the board is powered via the jack. I have been running servos off that pin with a 5v usb phone backup battery providing 2.1 amps plugged into the bbb jack for months with no issues. I agree that your solutio

[beagleboard] Re: How to use a 3G modem with BeagleBone Black using Sakis3G

Yep, I solved it. It was quite a while ago though and I'm no longer sure of the exact steps. However, I believe it had something to do with installing a package called glibc to provide getent. However, I didn't end up using Sakis3G because the 3G modem was used in a commerical embedded applicat

Re: [beagleboard] How to install linux-headers-3.8.13-bone30

Thanks for the reply Robert. I did it using wget https://raw.github.com/gkaindl/beaglebone-ubuntu-scripts/master/bb-get-rcn-kernel-source.sh chmod +x bb-get-rcn-kernel-source.sh ./bb-get-rcn-kernel-source.sh as you said. It installed the kernel successfully and said done: kernel sources for 3

[beagleboard] Re: BBB + PREEMPT_RT

Just a few thoughts ... It is not possible to have a fully deterministic real-time operating system on a processor that uses instruction/data caches. ie you have to turn off the cacheing to achieve determinism and eliminate performance jitter (which then degrades the average performance). >Fro

Re: [beagleboard] BeagleBone Black Webcam

I am facing same issues Williams, I am a newbie so can you tell me how to compile the driver module into the kernel and as a module. The webcam I am trying to interface is based on gspca_ov519. I used opkg install kernel-module-gspca-ov519 and found that it was already present on the root bu

[beagleboard] Re: BBB A5A with CAN cape BB-BONE-SERL-01-00A2: firmware loaded but no can device

Hi Benny, I have exact the same issue. What I found is: CAN dtbo load correctly when boot from sd card, but not work when boot from eMMC, that make me think it is a boot order issue. I googled it and according to this post: https://groups.google.com/forum/#!msg/beagleboard/Iem_mHknIUM/buwAqagYukw

[beagleboard] Re: Failed angstrom build

Hi, There are problems compiling the Angstrom master branch on 64-bit ubuntu variants relating to the native libpseudo. There are two alternatives: Switch to the angstrom-v2013.12-yocto1.5 branch which is meant to include a fix (see: https://www.mail-archive.com/angstrom-distro-devel@linuxtogo

[beagleboard] BBB as EtherCAT slave?

Hello All, I know that AM335x processor has hardware support to build an EtherCAT slave using PRUs. I'm not sure if it's possible to use BBB I/O pins to implement it, maybe with an external PHY. Could anyone give me a feedback about it? It would be a great application for industrial drives. Tha

[beagleboard] Latest image Angstrom Distribution BBB 2GB eMMC 2013-09-04 reports as Angstrom v2012.12

Good afternoon :) I am following a post by Bruce which has been terminated: I installed the latest image Angstrom Distribution (BeagleBone Black - 2GB eMMC) 2013-09-04 from https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.09.04.img.xz and installed it on my shinny new B

[beagleboard] Re: BeagleBone black with Audio and WiFi cape

Hi Eze_rg, Can you please share the wifi dongle you are using? Thanks! On Wednesday, October 2, 2013 12:28:58 AM UTC+8, eze_rg wrote: > > I'm currently using the Audio Cape and a usb wifi dongle on the BBB, no > issues so far. > > El lunes, 30 de septiembre de 2013 05:59:13 UTC-3, pankaj.bharad

[beagleboard] Re: QT Application weird problem on beagleboard

I guess that TI Image for LCD is broken. (it comes with alot crap installed!). Installed the beagleboard's one and it's all going very well. I decided I'll not use X11 in my board (for my actual project it's not interesting, also saves a good chunk of beagleboard ram). Unfortunaly I don't have

Re: [beagleboard] Drivers are not installing for windows 8.1

There is no general. Maybe you're thinking Windows 8? Maybe I can't see General because of reason X? On Wednesday, November 20, 2013 7:29:19 AM UTC-8, karthik reddy wrote: > > the drivers does not directly work in win 8 and higher platforms directly > u need to install the drivers after u disabl

[beagleboard] Re: Latest image Angstrom Distribution BBB 2GB eMMC 2013-09-04 reports as Angstrom v2012.12?

Hi Bruce :) I am having the same issue. Do you have a solution? Regards Andrew On Sunday, January 19, 2014 9:56:14 AM UTC+11, bruce...@gmail.com wrote: > > Hi, > > I installed the latest image Angstrom Distribution (BeagleBone Black - 2GB > eMMC) 2013-09-04 from > https://s3.amazonaws.com/angstr

[beagleboard] anyone know the rtc m41t56

i try follow the http://www.abelectronics.co.uk/rtcpi-beaglebone-black/info.aspx (this is for ds1307) the i2cdetect -y -r 1 find the right value "68" and can use the i2cdump -y 1 0x68 to see the memory with the command "hwclock -r -f /dev/rtc1" received the error "hwclock: ioctl(RTC_RD_TIME)

[beagleboard] anyano know m41t56?

i try follow the http://www.abelectronics.co.uk/rtcpi-beaglebone-black/info.aspx (this is for ds1307) the i2cdetect -y -r 1 find the right value "68" and can use the i2cdump -y 1 0x68 to see the memory with the command "hwclock -r -f /dev/rtc1" received the error "hwclock: ioctl(RTC_RD_TIME) t

[beagleboard] Anyone know the rtc M41T56?

i try follow the http://www.abelectronics.co.uk/rtcpi-beaglebone-black/info.aspx (this is for ds1307) the i2cdetect -y -r 1 find the right value "68" and can use the i2cdump -y 1 0x68 to see the memory with the command "hwclock -r -f /dev/rtc1" received the error "hwclock: ioctl(RTC_RD_TIME) t

[beagleboard] anyone know the rtc m41t56 ?

i try follow the http://www.abelectronics.co.uk/rtcpi-beaglebone-black/info.aspx (this is for ds1307) the i2cdetect -y -r 1 find the right value "68" and can use the i2cdump -y 1 0x68 to see the memory with the command "hwclock -r -f /dev/rtc1" received the error "hwclock: ioctl(RTC_RD_TIME) t

Re: [beagleboard] PRUSS and accessing ADC registers on Beaglebone Black

Hi Charles, Thank you very much for your answer. I manage to access it after enable ADC using 'echo BB-ADC > /sys/devices/bone.capemgr.*/slots' . Though I could only do it in kernel 3.8, later kernel (3.12) gives an error saying symbol ocp could not be found. I do not really know how to change

[beagleboard] Counting events

I want to use a hall effect motor encoder to determine the number of revolutions of a wheel. Using the BB-KEYS I am able to set up /dev/inputs/event1 that captures the event and records the number of interrupts in /proc/interrupts. I believe setting /sys/class/gpio/gpioxx/edge will do pretty mu

[beagleboard] Re: Beaglebone Black: Boot from USB or serial

https://github.com/ungureanuvladvictor/BBBlfs Here you have src code to do a usb boot/flash the eMMC with an image in .tar.xz format as I remember. When the ROM USB boot kicks in you will see an ethernet gadget device, you can find the vid/pid in my code over there. Check if your linux machine

[beagleboard] Re: Beaglebone Using MySQL

This sounds like an Eclipse configuration issue and while you might find someone here who has run Eclipse cross compiling to gcc-arm, it is likely that you'll find far more familiar with setting up Eclipse for cross compiling in an Eclipse or gcc forum. Or better yet a MySQL forum. A first ste

[beagleboard] Reminder about ongoing case give-away

*BeagleBoneBlack contest!* #beagleboneblackcase >From February 1, 2014 to March 1, 2014, in partnership with TI/BeagleBone Adafruit will be giving away 10 BeagleBoneBlack cases per week, all you need to do is share your project and we'll pick 10 a