HI friends, im a newbie, still don't get my beagle bones black boards from
digikey.
For a project i will ned 4 serial ports, i already see i must forget to use
HDMI if choice that option. I need also to show on a display data and also
allow me interact in a easy way with my program.
Is possibl
On Thursday, December 11, 2014 7:35:39 AM UTC-5, Julian Gold wrote:
>
> On both B and C revisions of Beaglebone black, our application (running
> under either the shipped Angstrom or Debian distros) locks up after random
> amounts of time. The debug port reports the following problems:
>
> [ 752.
On Sat, Dec 13, 2014 at 10:29 AM, david turvene wrote:
> On Thursday, December 11, 2014 7:35:39 AM UTC-5, Julian Gold wrote:
>>
>> On both B and C revisions of Beaglebone black, our application (running
>> under either the shipped Angstrom or Debian distros) locks up after random
>> amounts of tim
2014-12-12 17:10 GMT+01:00 :
>
> The topic starter there reported that a reboot via watchdog didn't work.
>
I tried the same (from within a bare-metal application) and noticed the
same. Once the PHY is in this state also a watchdog-triggered reset does
not help, my software was trapped in an endle
On Saturday, December 13, 2014 10:47:01 AM UTC-5, Chris Morgan wrote:
>
>
> Wouldn't it make sense to raise the priority of the timer or whatever
> code was hitting the WDT? It seems like a bug if usb or other
> interrupts could cause the watchdog to fail to be serviced given that
> the system i
Another jessie behavior question. (BBB Rev.C jessie versus wheezy)
If I load any of the jessie snapshots, including 12-11, I can not get ls to
colorize if
I am signed in as root on ttyO0. Debian 7.7, including 12-11 does work as
expected.
Specifically: On jessie 10-29 or 12-11
if I am signed
Hello everyone
I’m new on Qt on arm linux. I’m trying to cross compile the newest version
Qt 5.4 for Beaglebone Black(BBB). I think I almost successed because I
finished configure and make of Qt 5.4 based on root file system on BBB.
When I try to run an example, the GUI shows up but the linux
If you are using the CAN device and the c_can driver, then implementing the
kernel mod and re-building/re-installing would seem to be your only option.
If you need to use CAN and can use a USB-to-CAN adapter, or some other
serial-to-CAN adapter, then maybe you could get around this problem.
On
From: Yang Lei
Reply-To: "beagleboard@googlegroups.com"
Date: Saturday, December 13, 2014 at 1:55 PM
To: "beagleboard@googlegroups.com"
Subject: [beagleboard] Qt 5.4 on BBB OpenGL: Linux is dead after execute
examples. Keyboard and mouse have no response.
> Hello everyone
>
> I¹m new on
Hi!
Just wondering if anyone has any experience using the L470 over SPI with
the BBB?
I followed this post:
http://cranehome.info/index.php?/archives/7-Using-the-L6470-Stepper-Driver-with-Beagle-Bone-Black.html
And built this example code:
https://github.com/photomankc/SFL6470-Demo-Project--L
Thanks!
I tried adding -platform eglfs but the result is still the same. Either
mouse and keyboard doesn't response.
I believe the default platform is eglfs. So, even I don't use -platform
option, the it should run with eglfs platform. Am I right? My reference is
here http://doc.qt.io/qt-5/embedd
hi there,
I experience this below:
Need to get 64.4 MB of archives.
After this operation, 244 kB of additional disk space will be used.
E: You don't have enough free space in /var/cache/apt/archives/.
I install my debian image in the 4Gb sd-card. I tried 8Gb, I still
experience the same thing.
S
hi Robert,
Can you tell me how to use the sdcard?
regarding the command "apt-get update"
Even i change the sd card to 8GB, it still says not enough space.
How can i do that?
when i remove the sd card, the BBB doesnt want to boot up.
Am I missing any step here?
thanks
please guide me ( new bie)
Me too, I use Ubuntu OS & I don't know how to configure GPIO
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an e
Hy, I have a BBB rev C with Debian Image 2014-05-14.
I plugged one of my USB HDD 500 GiB with some music and other things in,
and i booted my BBB in stand alone mode.
The Problem : I was looking for the mounting point, but didn't found. So
back to Windows, I plugged my drive and didn't understa
Hi,
I have a BeagleBone Black and want to attach a number of numpads via USB.
Unfortunately it is not possible to connect more than 5 USB numpads. It
seems like a kernel or device driver limitation since the bus topology does
not matter. The sixth numpad always produces the following
(/var/log
hi Robert,
Forget about the cheese.
Why when i try at home,
the update always stops at this point:
trusty/universe Translation-en_US
but, when i try to update at the office using their internet network, it
works fine.
DO i have to do anything on my router?
thanks
On Tuesday, 9 December 201
I have a BBxM board and try to boot with power from 5v plug-in. However, my
BBXM cann't read uSD card and repeat booting again and again. When I try
using OTG USB port with 5v outside to power the board, then It can boot and
run fine.
Have you ever seen this problem, how to solve it ?
I guess
I'm running the test.js , a simple script to obtain raw data from the
sensor on BBB rev C with debian, it happens to print out the output
however, there is this error thrown at the end:
/usr/local/lib/node_modules/mpu9150/node_modules/i2c/lib/i2c.coffee:111
return callback(err, actualBuffer);
On Sat, Dec 13, 2014 at 10:46 PM, wrote:
> hi there,
> I experience this below:
>
> Need to get 64.4 MB of archives.
> After this operation, 244 kB of additional disk space will be used.
> E: You don't have enough free space in /var/cache/apt/archives/.
>
> I install my debian image in the 4Gb sd
On Sat, Dec 13, 2014 at 3:47 PM, wrote:
> hi Robert,
> Can you tell me how to use the sdcard?
> regarding the command "apt-get update"
>
> Even i change the sd card to 8GB, it still says not enough space.
> How can i do that?
> when i remove the sd card, the BBB doesnt want to boot up.
> Am I mis
21 matches
Mail list logo