Yes. The negative side of the 5 Volt regulated supply goes to BBB system
ground, which includes P9-1 and P9-2.
--- Graham
==
On Saturday, August 29, 2015 at 5:18:20 PM UTC-5, sonic.ge...@gmail.com
wrote:
>
> Hello. I've found this thread to be quite helpful so far, thank you all.
> I have a q
I really need help getting this set up. I had a working X server, but no
hardware OpenGL... is TI still dragging their feet on this? I installed
another Xserver that looks like it may work better, but can't get the keyboard
and mouse working, even manually configuring it in xorg.conf
The X
Hello. I've found this thread to be quite helpful so far, thank you all.
I have a question regarding where one would connect the "minus" side of my
regulated voltage. I have AC -> 24 -> regulated 5v. I know I would
connect positive to P9_5,6, but would I connect the negative of my 5v
regulate
Based on Kingston's road map, 128GB. 64GB for Micron.
Next controllers will be 5.0.
Gerald
On Sat, Aug 29, 2015 at 11:54 AM, Graham wrote:
> Gerald:
>
> What is the largest (addressable memory space) eMMC that will fit on the
> existing
> board footprint on the BBB Rev. C ?
>
> --- Graham
>
>
Pin mux
29 Авг 2015 г. 15:03 пользователь "Dileep D R"
написал:
> Hi,
>
> I am trying to enable MMC2 in U-boot. Below are my changes in U-boot
> source.
>
> File: board.c
> Function : cpu_mmc_init
> Added : omap_mmc_init(2, 0, 0, -1, -1);
>
> File: mmc_host_def.h
> Added : #define OMAP_HSMMC3_BAS
Gerald:
What is the largest (addressable memory space) eMMC that will fit on the
existing
board footprint on the BBB Rev. C ?
--- Graham
==
On Saturday, August 29, 2015 at 4:17:38 AM UTC-5, philippe.frossard wrote:
>
> Le 28/08/2015 15:39, Gerald Coley a écrit :
> > The eMMC will die when it
thanks for the response,
With this particular webcam, you can set the exposure parameter through
OpenCV.
At least that's what i found out googling.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBo
Hi,
I am trying to enable MMC2 in U-boot. Below are my changes in U-boot source.
File: board.c
Function : cpu_mmc_init
Added : omap_mmc_init(2, 0, 0, -1, -1);
File: mmc_host_def.h
Added : #define OMAP_HSMMC3_BASE 0x47810100
File: clock_am33xx.c
Function : enable_basic_clocks
Added : &cmper->mmc
Le 28/08/2015 15:39, Gerald Coley a écrit :
The eMMC will die when it runs out of space. If a sector goes bad, it
gets marked as bad and you loose the space. It is all handled by the
controller inside the eMMC. Very similar to a Solid State Drive.
MTBF depends on how you are using it. Most lik
>
> *Thank you Andrew for your suggestion.But i don't want to use any extra
> hardware.I want to use direct BBB.Wonder if i couldn't find Can Bus
> driver for BBB ?*
Good luck with that. It is my understanding that you *have* to have a cape,
or at minimum logic level translation in order to
If blur is the main issue for a cheap webcam and you can't adjust the exposure
time settings manually as with an industrial cam, you could try increasing the
light level (add a very bright lamp) to encourage the camera to use shorter
exposure times and therefore reduce the blur of moving objects
11 matches
Mail list logo