Hi,
I have problems to understand how to configure uEnv.txt to get BBB to boot
from eMMC.
Setup:
1. u-boot
u-boot is created as described here:
https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Bootloader:U-Boot
i.e.
git clone https://github.com/u-boot/u-boot
cd u-boot/
Hello,
I'm still looking to configure WiFi. Can someone suggest what tools I
should be using to configure the WiFi? This is 3.8.13-xenomai-r83
debian_version 8.7 machinekit image. Here is a bit more information.
I have found many tutorials which use many different tools. I have not
found a tutori
If I tie the two 3.3V pins together, can I draw 0.333mA or just 250mA??
I'm using 3 thermistor sensors at 0.11mA each so I'm wondering if I'm going
to blow my board.
Many thanks for some knowledgable input!!
--
For more options, visit http://beagleboard.org/discuss
---
You received this mes
Sorry if this is the wrong section.
I have a few questions about Windows CE on this device:
- which versions are available?
- are all functions, network etc. supported?
- does it retain data after rebooting or does it lose data on reboot?
- does it use hardware acceleration?
Thanks!
--
For mo
Tying them together will not increase current capacity. They both come from
the same place on the board, the power supply device itself..
Gerald
On Sun, Mar 5, 2017 at 9:46 AM, wrote:
> If I tie the two 3.3V pins together, can I draw 0.333mA or just 250mA??
>
> I'm using 3 thermistor sensors
Graff:
I think you are confusing Amperes (A) and milliAmperes (mA).
You need to understand the difference and then re-run your calculations.
I doubt that three thermistors, each drawing a fraction of a milliAmpere
would overload a 250 milliAmpere supply.
--- Graham
==
On Sunday, March 5, 201
Hello,
Can someone suggest how to configure the wifi on this 3.8.13-xenomai-r83
Debian 8.7 machinekit BBB? It appears that connman is installed and
aptitude hangs when I try to remove it. I was trying to remove connman such
that I could use wicd, but I could not get connman to remove. It appears
I
Wow thank you!!! I finally got it working!!! Thank you!
On Thursday, October 29, 2015 at 4:34:07 AM UTC-10, yo.i...@gmail.com wrote:
>
> Following these steps exactly worked for me with El Capitan, must be
> 10.11.1
> https://github.com/jwise/HoRNDIS/issues/42#issuecomment-150522963
>
> On Friday
Hi Deepak,
Did you solve your problem?
Even I am facing same issue, is there any solution you have to solve this
issue?
Thanks & regards,
Madhu
On Wednesday, November 25, 2015 at 11:59:33 PM UTC+5:30, deepak srinivasan
wrote:
>
> Hi all
>
> I am trying to learn device drivers following tutori
