Re: [beagleboard] Multicore Support for Beagle

You haven't seen the x15 yet? https://beagleboard.org/x15 On 24 May 2017 at 21:42, wrote: > Hi all, > > I see this was asked a few years ago, are there still no further plans to > add a multicore board to the lineup? > > I ask as its very likely the company I work for

Re: [beagleboard] Multicore Support for Beagle

Hi all, I see this was asked a few years ago, are there still no further plans to add a multicore board to the lineup? I ask as its very likely the company I work for would have ordered one if there was, we use the PI 3 and its not 100% ideal, we would love an RTC, I know the BBB CPU has an

Re: [beagleboard] Can't get wifi to work on BBBW.

On Wed, May 24, 2017 at 4:22 PM, wrote: > I can't seem to get anywhere with setting up wifi on my BBBW. I installed > latest image (Debian 8.7 2017-03-19 4GB SD IoT ) > > Whenever i try to any wifi related command with connmanctl i get: Error > disabling wifi tethering:

[beagleboard] systemd question ?

Hello everyone, I tried to start with systemd initialization and got this message below: = You are in emergency mode. After logging in, typ/bin/sh: /home/bianchi77/buildrd You are in emergency mode. After logging in, type "journalctl -xb" to view system logs, "systemctl reboot" to

[beagleboard] Can't get wifi to work on BBBW.

I can't seem to get anywhere with setting up wifi on my BBBW. I installed latest image (Debian 8.7 2017-03-19 4GB SD IoT ) Whenever i try to any wifi related command with connmanctl i get: *Error disabling

Re: [beagleboard] See if I understand setting up a device tree for the PRU

On 5/17/2017 9:37 PM, Clark Sann wrote: > > Signal Signal name on Mode from Data > Octavo per BB Blue Sheet Table 4-1 > schematic > > MDIR 1A GPIO2_0_T13

Re: [beagleboard] Re: UART5 not working on Beaglebone Black

Let's start with a few clues. What board and revision level are you using? (example: BeagleBone Black, Rev C.) What OS, version, release date and kernel are you using? What other changes, if any, have you made to the system software? What hardware / I-O do you have plugged into the accessory

[beagleboard] Re: UART5 not working on Beaglebone Black

I tried uncommenting the lines in /boot/uEnv.txt about disabling HDMI, but it did not help. I also tried typing in *optargs=capemgr.enable_partno=BB-UART1,BB-UART2,BB-UART3,BB-UART5* at the end of that file. Then I was trying to type optargs=quiet

Re: [beagleboard] Re: Development environment for BBB and Win 7 64 bit for C-programming

I have used the same tool chain (in various versions) for Angstrom, wheezy and jessie on the BBB without problems. I think some of the recent security changes in BBB jessie might need to be loosened during development, (I like to develop in root on the BBB) but once the application is running

Re: [beagleboard] pru-rproc failing on boot, working manually

This behavior started, I think when the Debian Jessie distribution appeared. Prior to that, the PRUs started up at boot perfectly as far as I could tell. Later, post-Jessie, I worked around it with similar methods to what you are doing. I didn't consider it a serious problem since I could start

Re: [beagleboard] pru-rproc failing on boot, working manually

Looks like this kind-of works now... dmesg doesn't show any errors, but a /dev entry for rpmsg_pru31 is only created if I manually cycle an rrmod -f pru_rproc, modprobe pru_rproc... Is this because the pru's are booting before the /dev filesystem kernel modules are loaded? On Thursday, 18 May

[beagleboard] avahi question ?

Hi Robert, Where can I find avahi setting ? Is that the service that giving me "ssh to 192.168.7.2" ? Thanks -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are

[beagleboard] Re: Flashing eMMC memory from SD card with Chipsee Debian Jessie

I saw the thread https://sourceforge.net/p/win32diskimager/tickets/9/ before, but nothing helped to me. I 've used Win32DiskImager v0.8. I see, it exists v1.0 on sourgeforge.net. Dňa utorok, 23. mája 2017 16:33:31 UTC+2 Dennis Lee Bieber napísal(-a): > > On Mon, 22 May 2017 23:36:28 -0700