Re: [beagleboard] Re: Custom Board doesnt run with Angström Image

I tried to build my own MLO and uboot.img with this commands: - make CROSS_COMPILE=arm-linux-gnueabihf- distclean - make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_boneblack_defconfig - make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j4 I suppose that I have to build a custom MLO and

Re: [beagleboard] Can I get some help with getting started with the pocket beagle

This was exactly the problem. Once I removed the horndis all was good. Thank you. On Thursday, March 8, 2018 at 9:20:14 AM UTC-5, RobertCNelson wrote: > > On Thu, Mar 8, 2018 at 6:35 AM, Tony Giaccone > wrote: > > I thought I posted here once before but I don't see the

Re: [beagleboard] I2S interface on BBB

>>> 2, Can I change MCLK frequences to 12 MHz while frame rate is 44,1 Khz? Do you really mean 12 MHz? or 24 MHz? Normally systems running 44.1 kHz frame rates use an MCLK of 44.1 kHz * 256 = 11.2896 MHz, or,44.1 kHz * 512 = 22.5792 MHz --- Graham == -- For more options, visit

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

I have tried: - 4 distinct power supplies (3 x 5V, 1x 12V) - SD card and built in memory - 3 different OS images -- latest 'iot' image from https://beagleboard.org/latest-images -- image referenced in BeagleBoneBlue FAQ,

Re: [beagleboard] I2S interface on BBB

On 09/03/18 05:24, Yiling Cao wrote: > By noise, do you mean analog background noise or digital related noise? If your BCLK and WCLK are up the spout, then the CODEC will not be synchronised to the audio stream and you'll get something that sounds like static instead of the intended waveform.

Re: [beagleboard] Reading Image with Win32 Disk Imager - Why Does Boot Get Copied with Read Only Allocated Partitions

On Thu, Mar 8, 2018 at 1:58 PM, Jeff Andich wrote: > Hi, > > I was needing a utility to read/clone an SD card without copying all of the > additional wasted space on an SD card like the original Win32 Disk Imager > Does. From what I can tell, the latest Etcher for Windows

[beagleboard] Reading Image with Win32 Disk Imager - Why Does Boot Get Copied with Read Only Allocated Partitions

Hi, I was needing a utility to read/clone an SD card without copying all of the additional wasted space on an SD card like the original Win32 Disk Imager Does. From what I can tell, the latest Etcher for Windows only writes to SD card. So I just tried the latest Win32 Disk Imager which now

Re: [beagleboard] I2S interface on BBB

By noise, do you mean analog background noise or digital related noise? On Thu, Mar 8, 2018 at 6:17 AM, Stuart Longland wrote: > On 07/03/18 21:52, h...@olli-ai.com wrote: > > I'm try to use TVL320AIC3254 Codec with Beaglebone Black via I2S bus. At > > present, I can

[beagleboard] Fwd: Us congress hearing of maan alsaan Money laundry قضية الكونغجرس لغسيل الأموال للمليادير معن الصانع

YouTube videos of U.S. Congress money laundering hearing of Saudi Billionaire " Maan Al sanea" with *bank of America* and The owner of Saad Hospital and Schools in the Eastern Province in *Saudi Arabia* and the Chairman of the Board of Directors of Awal Bank in *Bahrain*

Re: [beagleboard] Can I get some help with getting started with the pocket beagle

On Thu, Mar 8, 2018 at 6:35 AM, Tony Giaccone wrote: > I thought I posted here once before but I don't see the posting or any > replies so if this is a dup my apologies. > > I'm trying to set up a pocket beagle with my Mac and I can't seem to get USB > networking up. > > When I

[beagleboard] Re: Can I get some help with getting started with the pocket beagle

Tony Giaccone wrote: > > When I connect the device to my mac is shows up on the networking tab as > BeagleBone, and BeagleBone2. And I can ssh into the dvice. However as soon > as I turn on network sharing everything blows up. I'm not clear - where are you turning on

[beagleboard] introduction

hello everyone, I am Deepanshu Gajbhiye. I am a 3rd-year computer science student. I would like to work in beagle board as my GSoC project. I have been working with hardware hacking and IOT for 3 months now. I have done firmware emulation, extraction of firmware, extracting sensitive

[beagleboard] Can I get some help with getting started with the pocket beagle

I thought I posted here once before but I don't see the posting or any replies so if this is a dup my apologies. I'm trying to set up a pocket beagle with my Mac and I can't seem to get USB networking up. When I connect the device to my mac is shows up on the networking tab as BeagleBone,