Re: [beagleboard] Cannot access to internet after upgrade firmware

Thank you all. It fixed when I re-flash eMMC latest image download from > On 23 Nov 2020, at 12:35 AM, jonnymo wrote: > > For the WiFi side, did you set the dns and gateway for the WiFi connection? > You can do this from command line via: > # connmanctl config --ipv4 manual > # connmanctl

Re: [beagleboard] Cannot access to internet after upgrade firmware

For more information, I test with another new BeagleBone AI with default Debian OS pre-installed from factory, I got the same thing when the before upgrade firmware I can use tethered from PC to the board (macOS - 192.168.6.2), connect to the wifi router and access to the internet. But after up

Re: [beagleboard] Cannot flash latest image to eMMC storage

Thanks all. When I re-download and try to re-flash with Ether again then It woks now. > On 22 Nov 2020, at 11:35 PM, evilwulfie wrote: > > IF you use a flasher image you do not need to edit anything, just use etcher > to copy file > to SD card and boot up the board. It should just flash. > >

Re: [beagleboard] Cannot access to internet after upgrade firmware

Thank you all. It fixed when I re-flash eMMC latest image download from https://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz . Than

Re: [beagleboard] Cannot access to internet after upgrade firmware

For the WiFi side, did you set the dns and gateway for the WiFi connection? You can do this from command line via: *# connmanctl config --ipv4 manual * *# connmanctl config --nameservers * The connman connections should be under the '/var/lib/connman' folder. You could view your connection

Re: [beagleboard] Cannot access to internet after upgrade firmware

- I am using Beagle Bone AI - Latest image of BeagleBone AI flash to eMMC (AM5729 Debian 10.3 2020-04-06  16GB eMMC IoT TIDL Flasher — https://debian.beagleboard.org/images/am57xx-eMMC-fl

Re: [beagleboard] Cannot access to internet after upgrade firmware

Which BeagleBoard do you have? What image is it running? What OS is running on the system you are tethered to? What steps did you perform for the FW upgrade? Cheer, Jon On Sun, Nov 22, 2020 at 4:38 AM wrote: > With tether option, on first time boot up board can access to internet to > upgrad

[beagleboard] mm Wave radar integration

Planning to integrate Texas Instruments mm Wave radar with BBB running Ardu pilot for collision avoidance. Any support assistance or guidance on that... Yash -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Grou

Re: [beagleboard] Cannot flash latest image to eMMC storage

IF you use a flasher image you do not need to edit anything, just use etcher to copy file to SD card and boot up the board. It should just flash. On 11/22/2020 9:13 AM, y.sek...@gmail.com wrote: *BeagleBone AI Flasher Problem* I trying to latest images from AM5729 Debian 10.3 2020-04-06 16GB

[beagleboard] Cannot flash latest image to eMMC storage

*BeagleBone AI Flasher Problem* I trying to latest images from AM5729 Debian 10.3 2020-04-06 16GB eMMC IoT TIDL Flasher to use SDCard flash to eMMC memory by following the step as in

Re: [beagleboard] Cannot access to internet after upgrade firmware

Looks more like a networking issuejust check whether ur wifi interface of BBB has the ip allotted by wifi access point. Then do a traceroute to 8.8.8.8 and check whether the request is pointing to gateway or not. Else you will need to update default routeshould not be a major challenge to f

[beagleboard] Cannot access to internet after upgrade firmware

With tether option, on first time boot up board can access to internet to upgrade firmware. when finish upgrade i can use tethered option access to the board with ip: 192.168.6.2 and using connmanctl connect to my wifi router but it cannot ping to 8.8.8.8 and another too. How can i fixed it? -