I have two BBBs, in each I put a battery. When I switch them off, in one
the leds go out, in the other the user led 3 (the one closest to the
network connetion) stays on, and the board drains the battery in a day or
so. I'm not aware of changes I made to the boards, other than disabling dns
on
I am using this battery now, and it works fine. I connected it as in the
link I posted.
https://www.antratek.nl/polymer-lithium-ion-battery-2000mah
and this connector
https://www.antratek.nl/jst-battery-connector-254
On Sunday, June 4, 2017 at 3:23:04 PM UTC+2, Christine Karman wrote:
>
I put a lipo battery in my BBB and I managed to make it work, and charge.
The only issue is that when I disconnect power after charging the battery,
the BBB shuts down. When I press the power button, it stays on. Is there a
way to disable the board shutting down when disconnecting the power cord
I have added a battery to my BBB, following
this
https://www.element14.com/community/community/designcenter/single-board-computers/next-gen_beaglebone/blog/2013/08/10/bbb--rechargeable-on-board-battery-system.
The board works on battery power for about 2.5 hours, but it doesn't charge
the batte
I don't see why not. The Elo touchscreen I have used had hdmi I could
connect to various devices.
On Saturday, May 6, 2017 at 8:47:19 PM UTC+2, Dario Guaman wrote:
>
>
> HI everyone, is posible to connect the BBB with the ELO touchscreen
> monitor
>
> https://www.elotouch.com/touchscreen-moni
On Sunday, March 8, 2015 at 5:58:07 PM UTC+1, Walker Archer wrote:
>
> I really didn't expect that to work since the 5v ports stay powered after
> a shutdown. However, I went ahead and tried it and you are absolutely
> right. The 3v ports go dark after a shutdown.
>
I connected a led to pins