Robert, I've removed the links from the wiki. I'll clean up the instructions shortly.
Daniel Jackson CircuitCo On Tuesday, October 22, 2013 9:45:09 AM UTC-5, Mickae1 wrote: > > Hi, > > I wanted to signal an error ( or not, but I double checked ) : > > > The Key ENTER of the LCD7 cap Rev A3 is connected to the GPIO0_3 > => > https://github.com/CircuitCo/BeagleBone-LCD7-RevA3/blob/master/BeagleBone-LCD7-RevA3-schematic.pdf?raw=true > > But In the last updated version of the file BB-BONE-LCD7-01-00A3.dts , I > got : > > > > 0x040 0x2f /* KEY_LEFT gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ > 0x044 0x2f /* KEY_RIGHT gpmc_a1.gpio1_17, INPUT | PULLDIS | MODE7 */ > 0x04c 0x2f /* KEY_UP gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ > 0x198 0x2f /* KEY_DOWN mcasp0_axr0.gpio3_16, INPUT | PULLDIS | MODE7 */ > *0x070 0x2f /* KEY_ENTER gpmc_wait0.gpio0_3, INPUT | PULLDIS | MODE7 */* > > > > Which is normally 0x954 and not 0x070 ( 0x070 is for GPIO0_30 ) > > > So, am I right or wrong ? If I'm wrong, why in june, july, ... the address > of uart4_rx was 0x070, which is GPIO0_30 ? > > > > > > Micka, > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
