Thank gerald. I will contact them.
Regards
On Tuesday, December 1, 2015 at 7:58:00 AM UTC+5:30, Gerald wrote:
>
> I suggest you contact Element 14 customer support for assistance with your
> board.
>
> Gerald
>
>
> On Mon, Nov 30, 2015 at 8:17 PM, Madhukar Sah >
Can i conclude that my specific board has got some issue. Shall i proceed
for replacement. Can i take it for my confirmation that the above detailed
step by step procedure what i have described would work on a working board.
On Friday, November 27, 2015 at 7:18:28 PM UTC+5:30, Madhukar Sah
I have beaglebone black element14 rev C.
Is there any problem in rev C related to booting from SDcard?
On Fri, Nov 27, 2015 at 7:16 PM, Madhukar Sah wrote:
> I also did all the instruction give at
> *http://www.armhf.com/boards/beaglebone-black/bbb-sd-install/
> <http://www.armh
That did not work as well.
Regards,
Madhukar Sah
On Fri, Nov 27, 2015 at 7:10 PM, Madhukar Sah wrote:
> I followed the above given site instructions but that failed as well.
> Steps followed according to
> https://eewiki.net/display/linuxonarm/BeagleBone+Bla
bb$ sudo nano /media/rootfs/etc/init/serial.conf
~/prakash-bbb$ sync
~/prakash-bbb$ sudo umount /media/rootfs
-----
Regards,
Madhukar Sah
On Thu, Nov 26, 2015 at 7:20 PM, Robert Nelson
wrote:
> On Thu, Nov 26, 2015 at 2:04 AM, Madhukar Sah
> wrote:
> > I downloaded the MLO
tor from the PC
10. removed the sdcard from that and inserted in the beaglebone sdcard slot
11. Pressed the boot button and given power
12. NOTHING CAME ON THE CONSOLE
13. pulled out the power and given again without pressing the boot button,
and after around 1 min got sequence of "C" on the
otrunc
> blockdev --flushbufs /dev/sdb
>
> U-Boot SPL should then try to load u-boot.img from your FAT32 partition.
>
>
> On Wed, Nov 25, 2015 at 6:14 PM, Madhukar Sah
> wrote:
>
>> Forgot to say one thing. Doubting my MLO and uboot image file, i copied
>> the M
rk. I was
expecting that at least i will get some debug messages from the MLO but the
debug console is completely empty.
On Wednesday, November 25, 2015 at 1:00:34 PM UTC+5:30, Madhukar Sah wrote:
>
> I have beaglebone black element14 board. My board is booting perfectly
> fine from e
I have beaglebone black element14 board. My board is booting perfectly fine
from eMMC. I want to boot it via SD CARD so downloaded the uboot fron denx
site, compiled and generated the *MLO* and *uboot* image file.Followed the
procedure of portioning the SD CARD into fat32 and ext4 and copied th
