Hello,
I am developing an application in C for my Beagle Bone Black, this
application needs to send and receive bytes through a door "/dev/ttyO4",
however when running the command read the application locks and remains
locked until it is stopped.
I know it's a simple thing but I've tried with
red. The micro-controller does a
> few other things like RTC, WDTs, power-up retries, and holding reset during
> power-up intended to make the system more reliable for remote operation.
> The firmware is on Github if you need to customize behavior.
>
> Hope this helps,
> -Ro
; > > above. Except for very low drain battery is essentially disconnected.
> > >
> > > I initially went the route of trying to use the onboard battery
> connector
> > > but it's not really a decent solution if you want solid system and
> battery
>
There is a battery cape that seems to do what you want
> http://andicelabs.com/beaglebone-powercape/
> this board does not use the pmic power pins
>
>
>
> On 7/14/2015 6:50 AM, Marlon Cesar Pilonetto wrote:
>
> Hello,
>
> I use the Beagle Bone Black in a project, it is
Hello,
I use the Beagle Bone Black in a project, it is mains powered with a source
we developed and has a lead-acid battery (not appropriate) for backup when
the power does not supply energy that would be only in the event of a fall
or a shutdown scheduled for maintenance, so the system does no
ibe from this group and all its topics, send an email to
> beagleboard+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
---
Marlon Cesar Pilonetto
(46) 9112-4963
Pato Branco - PR
-
t; Harvey
>>
>> >
>> >Em quinta-feira, 9 de julho de 2015 12:13:15 UTC-3, Wulf Man escreveu:
>> >>
>> >> paste a link to this fuel pump
>> >>
>> >>
>> >> On 7/9/2015 7:57 AM, Marlon Cesar Pilonetto wrote:
>>
760, you're going to have to change the UART
> frequency. Change the clock source, multiplier, etc.
>
> On Thu, Jul 9, 2015 at 10:03 AM, Marlon Cesar Pilonetto <
> marlon.p...@gmail.com > wrote:
>
>> Hello friend, there is a very big difference between 5760 and 576
Hello friend, there is a very big difference between 5760 and 57600, I
really need to communicate at the speed of 5760.
att,
Em quinta-feira, 9 de julho de 2015 13:57:17 UTC-3, Jerônimo Lopes escreveu:
>
> Have you tried 57600?
>
> 2015-07-09 13:39 GMT-03:00 Marlon Cesar Pilonetto
5760? This is my only doubt.
Em quinta-feira, 9 de julho de 2015 12:13:15 UTC-3, Wulf Man escreveu:
>
> paste a link to this fuel pump
>
>
> On 7/9/2015 7:57 AM, Marlon Cesar Pilonetto wrote:
>
> The baud rate the fuel pump uses is 5760 and I am unable to communicate w
The baud rate the fuel pump uses is 5760 and I am unable to communicate with
her through my application. The same application on fuel pumps with baud rate
9600 works perfectly .
Em quarta-feira, 8 de julho de 2015 14:23:33 UTC-3, Wulf Man escreveu:
>
>Standard baud rates supported by most
11 matches
Mail list logo
