Good evening!
I have manged to get a device tree compiled and loaded at boot, but am having an odd issues with a GPIO pin (48, P9-15, PINS 16) that when looked at through .../44e10800.pinmux/pins says it's muxed with a pull-down(00000027), but always reads ~1.54 volts when disconnected from all other hardware, and the result is a 1 or high reading when cat'd through /sys/class/gpio/gpio48/value. This has been confirmed on 3 different boards. This is an Element14 Rev C board running the 3.8.13-bone47 kernel (Debian). Has anyone seen this (or similar) behavior before? I've scanned the FAQ and similar posts, and am hoping that I have missed something. Thank you for your help! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.