I have a WD 2TB external USB drive. It mounts fine on my linux laptop. When I plug it into the beagleboneblack, it times out. Any help would be appreciated!
lsusb finds the device: Bus 001 Device 003: ID 1058:2626 Western Digital Technologies, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg: [ 3965.568158] musb-hdrc musb-hdrc.1: VBUS_ERROR in a_wait_bcon (89, <AValid), retry #1, port1 00000104 [ 3966.776484] usb 1-1: new high-speed USB device number 3 using musb-hdrc [ 3966.977419] usb 1-1: New USB device found, idVendor=1058, idProduct=2626, bcdDevice=10.28 [ 3966.977438] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3966.977446] usb 1-1: Product: My Passport 2626 [ 3966.977454] usb 1-1: Manufacturer: Western Digital [ 3966.977461] usb 1-1: SerialNumber: 5758573245313048344E394B [ 3966.985267] usb-storage 1-1:1.0: USB Mass Storage device detected [ 3967.008783] scsi host0: usb-storage 1-1:1.0 [ 3968.041574] scsi 0:0:0:0: Direct-Access WD My Passport 2626 1028 PQ: 0 ANSI: 6 [ 3968.042213] scsi 0:0:0:1: Enclosure WD SES Device 1028 PQ: 0 ANSI: 6 [ 3968.055140] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3968.061239] scsi 0:0:0:1: Attached scsi generic sg1 type 13 [ 3968.063025] sd 0:0:0:0: [sda] Spinning up disk... [ 3969.096578] ...not responding... The BBB specs: System: Host: DataIntegrity-Secondary Kernel: 4.19.94-ti-r42 armv7l bits: 32 compiler: gcc v: 8.3.0 Console: tty 1 dm: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: TI AM335x BeagleBone Black details: Generic AM33XX rev: N/A serial: 1516BBBK13E1 Memory: RAM: total: 483.4 MiB used: 128.3 MiB (26.5%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Single Core model: ARMv7 v7l variant: cortex-a8 bits: 32 type: UP arch: v7l family: 7 model-id: 3 stepping: 2 microcode: N/A bogomips: 995 Speed: 1000 MHz min/max: 300/1000 MHz Core speed (MHz): 1: 1000 Features: edsp fastmult half neon thumb thumbee tls vfp vfpd32 vfpv3 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Message: No ARM data found for this feature. Display: tty server: N/A driver: tty: 197x45 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: simple-audio-card driver: asoc_simple_card bus ID: N/A chip ID: simple-audio-card:sound Sound Server: ALSA v: k4.19.94-ti-r42 Network: Message: No ARM data found for this feature. IF-ID-1: can0 state: down mac: N/A IF-ID-2: can1 state: down mac: N/A IF-ID-3: eth0 state: up speed: 100 Mbps duplex: full mac: 80:30:dc:53:f6:f6 IP v4: 192.168.1.212/24 scope: global broadcast: 192.168.1.255 IP v6: 2600:1700:6d52:b1f0:8230:dcff:fe53:f6f6/64 type: dynamic mngtmpaddr scope: global IP v6: 2600:1700:6d52:b1f0::31/64 scope: global IP v6: fe80::8230:dcff:fe53:f6f6/64 scope: link IF-ID-4: usb0 state: up speed: N/A duplex: N/A mac: 80:30:dc:53:f6:f8 IP v4: 192.168.7.2/24 scope: global broadcast: 192.168.7.255 IP v6: fe80::8230:dcff:fe53:f6f8/64 scope: link IF-ID-5: usb1 state: up speed: N/A duplex: N/A mac: 80:30:dc:53:f6:fc IP v4: 192.168.6.2/24 scope: global broadcast: 192.168.6.255 IP v6: fe80::8230:dcff:fe53:f6fc/64 scope: link WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 3.56 GiB used: 2.34 GiB (65.6%) ID-1: /dev/mmcblk1 model: S10004 size: 3.56 GiB block size: physical: 512 B logical: 512 B serial: 0x7ae2584c rev: 0x6 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 3.56 GiB size: 3.44 GiB (96.67%) used: 2.34 GiB (67.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk1p1 label: rootfs uuid: 39168434-dd05-449f-aa8a-c455aec0e138 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian buster main contrib non-free 2: deb http://deb.debian.org/debian buster-updates main contrib non-free 3: deb http://deb.debian.org/debian-security buster/updates main contrib non-free 4: deb [arch=armhf] http://repos.rcn-ee.com/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https://downloads.plex.tv/repo/deb public main Processes: CPU top: 5 1: cpu: 1.6% command: -bash pid: 2205 mem: 3.02 MiB (0.6%) 2: cpu: 1.5% command: [kworker/0:1h-mmc_complete] pid: 2210 mem: 0.00 MiB (0.0%) 3: cpu: 1.4% command: plex pid: 2016 mem: 30.9 MiB (6.3%) 4: cpu: 1.0% command: sshd: pid: 2201 mem: 5.23 MiB (1.0%) 5: cpu: 0.5% command: plex pid: 1863 mem: 40.9 MiB (8.4%) Memory top: 5 1: mem: 40.9 MiB (8.4%) command: plex pid: 1863 cpu: 0.5% 2: mem: 37.5 MiB (7.7%) command: nodejs pid: 668 cpu: 0.3% 3: mem: 30.9 MiB (6.3%) command: plex pid: 2016 cpu: 1.4% 4: mem: 12.0 MiB (2.4%) command: plex pid: 2059 cpu: 0.0% 5: mem: 6.58 MiB (1.3%) command: init pid: 1 cpu: 0.1% Info: Processes: 87 Uptime: 1h 05m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 running in: tty 1 (SSH) inxi: 3.0.32 -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/914a18d5-9fd9-418a-9b49-7b0cb5bd9ea0o%40googlegroups.com.