We are having a problem with a BBB that will not reliably boot from
shutdown after a power button is pressed.
In order to minimize power consumption we are shutting down the unit and
then using an external timer to bring the unit out of shutdown. On
approximately 1 out of 20 cycles the unit pow
I have a BBB that will not reliably boot after shutdown -h now is issued.
In order to minimize power consumption between periodic events the unit is
shutdown and then restarted by an external clock that momentarily pulls
down the power button. Approximately 1/20 times the unit will turn the
The board is powered off using the shutdown -h now command. It gets woken
up by pulling down the power button line for 250 mS.
Jon
On Thursday, October 24, 2013 4:16:07 PM UTC-4, Gerald wrote:
> How long is this pulse you are using to power off the board?
>
> Gerald
>
>
>
> On Thu, Oct 24, 20
Previously a shipping date of the middle of December was mentioned. Has
this date changed?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop recei
Is it possible to set gpio pins as outputs using u-boot on a Beaglebone
Black? I have seen posts on how to do so on an older beagleboard by
editing beagle.h but do not see any change when I do so. I can actually
delete beagle.h and it does not impact the compilation process. I have been
using
I need to rebuild my compiler tools for a set of BBB running a year old
version of Angstrom. I have installed the latest version of the tools and
discovered that there a number of changes that make it impossible to
compile applications to run on the older Angstrom distribution including
switch