BTW - The camera works fine on an rpi and my mac
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagl
Does the BBB USB have the bandwidth to use a cheap webcam? I've been
looking into this for a while and the answer seems to be no. I have a cheap
camera, lsusb shows it to be a "Vega USB 2.0 Camera" . This is in the
uvcvideo supported list. I can only grab 160x120 images. Lots of older
posts (20
Never mind about the password, I didn't read what it was asking for
carefully.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails f
Everything's good now. Thanks for the help. I was able to flash the latest
image, it took a couple tries, but it's in. I can now boot from the SD card.
What is the default sudo password? I want to install some software.
Thanks again,
--
For more options, visit http://beagleboard.org/discuss
--
Robert, Thanks. I followed the link provided. There are a lot of images. I
think this is the one I want:
Jessie Snapshot iotFlasher: (iot) (All BeagleBone Variants)
Get prebuilt image:
wget
https://rcn-ee.com/rootfs/bb.org/testing/2017-05-14/iot/BBB-blank-debian-8.8-iot-armhf-2017-05-14-4gb.im
Thanks for your replies. I tried the "boot button down" in the image and it
boots up fine. Thanks. I am now trying to flash the emac with an updated
image. I downloaded "BBB-eMMC-flasher-debian-7.5-2014-05-14-2gb.img.xz",
checked the shasum and dd'd as before. I inserted to the SD and held the
I just tried the SD card in a different BBB. It works fine. THere's
something amiss with the old BBB. Is there an update to u-boot I need to
install?
On Friday, May 19, 2017 at 10:02:40 PM UTC-7, mron wrote:
>
> I'm trying to make an SD card with the latest Jessie img. I dow
I'm trying to make an SD card with the latest Jessie img. I downloaded
"bone-debian-8.7-iot-armhf-2017-03-19-4gb.img.xz"
to my mac and checked the shasum. I decompressed it and used "dd
if=bone-debian-8.7-iot-armhf-2017-03-19-4gb.img
of=/dev/diskX bs=1m" to write to it.
Here's the BBB boot con
I want to switch to Debian. Does the gpiolibs and device tree stuff stay
the same? Will the PRU code I've written link in the same way?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
T
My BBB just flashed. I re-downloaded and extracted the image, remade the
microSD image and flashed it. This was the 4th or 5th attempt, but it
worked. I have no idea why this time worked and the others didn't.
--
For more options, visit http://beagleboard.org/discuss
---
You received this mess
I'm having a similar problem and just created a post. Are you using
BBB-eMMC-flasher-2013.09.04.img.xz? My BBB blinks LEDs for about 10 minutes
before hanging. I can boot from the SD card, so I'm trying to see if I can
copy the root to the eMMC and start up that way. Can you boot off the SD?
--
I am running Angstrom from the microSD. I want to copy it to the onboard
eMMC and boot from there. I've tried a number of things. I tried using
BBB-eMMC-flasher-2013.09.04.img. The install fails, I never see all the
LEDs lit. I've used mkfs.ext3 to create the eMMC partition, then rsync'd /
to t
12 matches
Mail list logo
