Hi Wesley,
I'm interested in checking this out!
The download links are broken, are you able to post new links?
Hope you're having a top day :D
-Rudy.
On Friday, August 31, 2012 at 7:04:39 AM UTC+10, Wesley wrote:
>
> Hey,
>
> So I tested to see how fast the GPIO toggle rate of the Beaglebone c
I was getting the same error changing from DHCP to manual
Just in case anyone else has this issue, I still had to set the gateway to
0.0.0.0 if it wasn't used
root@beaglebone:/# connmanctl services
*AO Wiredethernet_985dad474bf3_cable
Error:
root@beaglebone:/# connmanctl config e
Not sure what I'm doing wrong here, the MOSI pin stays high after the
BB-SPIDEV0-00A0.dtbo is loaded.
Have it working fine on Wheezy, but want to move to Jessie.
The .dtbo from Wheezy (BB-SPI0-01-00A0.dbto) won't load on Jessie so I'm
not able to verify that the dtbo is the issue.
Does anyone k
Thanks Brian!!
This worked for me.
Was tearing my hair out going from Wheezy to Jessie
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving
Hey... Can anyone out there provide some info on setting up and starting
timer 4?
I'd like to run it at 10MHz to use it as a clock for a LED driver IC
I've been googling for a while and haven't been able to find much.
--
For more options, visit http://beagleboard.org/discuss
---
You received
Had a similar problem following the same tutorial, used Emile's answer, the
DT overlay loads every time.
To check:
cat /sys/devices/bone_capemgr.*/slots
root@beaglebone:~# cat /sys/devices/bone_capemgr.*/slots
0: 54:PF---
1: 55:PF---
2: 56:PF---
3: 57:PF---
4: ff:P-O-L Bone-LT-eMMC-2G,00A0,T
