Is it possible to set gpio pins as outputs using u-boot on a Beaglebone Black? I have seen posts on how to do so on an older beagleboard by editing beagle.h but do not see any change when I do so. I can actually delete beagle.h and it does not impact the compilation process. I have been using the following steps for compiling u-boot:
make ARCH=arm CROSS_COMPILE=${CC} distclean make ARCH=arm CROSS_COMPILE=${CC} am335x_evm_defconfig make ARCH=arm CROSS_COMPILE=${CC} I understand that gpios default as inputs with pullups and ideally the signals would be active low but can not make a change to the hardware at this point. Jon -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.