Does anyone know if its possible to flash the eMMC though the serial
header? Otherwise the board is a bit useless without an sd card...
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To
Sounds like you popped the processor. I doubt just inserting the SD
card caused this as that is done all the time and I have never heard of
this causing an issue. There must have been something else at play here.
Gerald
On Thu, Aug 7, 2014 at 12:29 AM, haeusler.phil...@gmail.com wrote:
I
On Thu, Aug 7, 2014 at 12:29 AM, haeusler.phil...@gmail.com wrote:
I plugged a micro sd card into my Beaglebone Black while it was running
today. It shut off the board and now it won't start with the sd card
inserted.
The board works fine with the sd card out, but when inserted I only get a
Thanks Robert, I have logged the U-Boot and this is what I get.
Anything to indicate the sd card is not working?
Net: ethaddr not set. Validating first E-fuse MAC
w, usb_ether
Hit any key to stop autoboot: 0
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
On Thu, Aug 7, 2014 at 8:51 PM, haeusler.phil...@gmail.com wrote:
Thanks Robert, I have logged the U-Boot and this is what I get.
Anything to indicate the sd card is not working?
Net: ethaddr not set. Validating first E-fuse MAC
w, usb_ether
Hit any key to stop autoboot: 0
gpio: pin 53
This is without the card in the slot, with the card in the slot the BBB
wont switch on. I have tried a few other microSD's and they also prevent
the BBB from switching on.
...
So if your microSD is actually in the slot... That card is either
toast or worse.. Do you have any other
On Thu, Aug 7, 2014 at 9:08 PM, haeusler.phil...@gmail.com wrote:
This is without the card in the slot, with the card in the slot the BBB wont
switch on. I have tried a few other microSD's and they also prevent the BBB
from switching on.
that's odd.. so nothing over serial.. even u-boot spl
That's right. No serial output and just a quick flash of the power led.
On Friday, 8 August 2014 11:38:01 UTC+9:30, haeusler...@gmail.com wrote:
This is without the card in the slot, with the card in the slot the BBB
wont switch on. I have tried a few other microSD's and they also prevent
