On Tue, Mar 22, 2016 at 9:58 AM, Karina Bond wrote:
> A question about Robert's commentsmy USB devices are powered with their
> own supply though. In this case neither of the devices should be requesting
> the full 500mA.
>
> Anything I try To make this work with an unpowered USB HUB?
These
A question about Robert's commentsmy USB devices are powered with their own
supply though. In this case neither of the devices should be requesting the
full 500mA.
Anything I try To make this work with an unpowered USB HUB?
-Karina
Sent from my iPhone
> On Mar 22, 2016, at 7:18 AM, Rober
On Tue, Mar 22, 2016 at 8:56 AM, Karina Bond wrote:
>
> So the hub in my setup is unpowered. But I have tried powering up the USB
> devices first. Then powering up the beagle bone . In this case the two USB
> show up in the output of 'lsusb'.
>
> I am working on finding a powered USB hub to try th
So the hub in my setup is unpowered. But I have tried powering up the USB
devices first. Then powering up the beagle bone . In this case the two USB show
up in the output of 'lsusb'.
I am working on finding a powered USB hub to try this with. But ideally I'd
like to use an unpowered hub.
-K
On Tuesday, March 22, 2016, Karina wrote:
> Hi,
>
> I have a unpowered 2-port USB hub that I have connected to the BeagleBone
> Black (Rev C). I have two (serial over ) USB devices connected to the two
> port of the USB hub. They are are not powered to begin with. When i power
> up the Beagle Bon
Hi,
I have a unpowered 2-port USB hub that I have connected to the BeagleBone
Black (Rev C). I have two (serial over ) USB devices connected to the two
port of the USB hub. They are are not powered to begin with. When i power
up the Beagle Bone, i see the USB hub listed in the output for 'lsusb