Provided, you don't interfere with their settings during power up as they
are also the boot pins.
He's saying you shouldn't interfere with their state at boot. No driving,
pullup, or pull down on any of these pins (besides the those that configure
the sysboot setting on the board).
Relays
When reconfigured, would the LCD pins change states during boot up? For
example, if I had relays attached, would the pins open and close the relays
during boot?
Thanks
On Sunday, March 2, 2014 5:04:25 PM UTC-5, Gerald wrote:
As is indicated in the System Reference Manual, you can use the
From: mharris...@gmail.com
Reply-To: beagleboard@googlegroups.com
Date: Tuesday, March 4, 2014 at 12:20 PM
To: beagleboard@googlegroups.com
Subject: Re: [beagleboard] Need 16 GPIOs Next to each other on P8
When reconfigured, would the LCD pins change states during boot up? For
example
As is indicated in the System Reference Manual, you can use the LCD pins as
GPIO pins. Provided, you don't interfere with their settings during power
up as they are also the boot pins.
Gerald
On Sun, Mar 2, 2014 at 1:32 PM, mharris...@gmail.com wrote:
Hi,
I would like to configure BBB P8