[beagleboard] Re: Beaglebone Black + Audio codec TLV320AIC3106

2016-05-02 Thread J dog
Something of this nature should work on the command line. amixer -c sset 'Left Line Mixer LLOUT' on # Line out Left enable amixer -c sset 'Right Line Mixer RLOUT' on# Line out Right enable amixer -c sset 'Line DAC' 90 # Adjust Line out volume

[beagleboard] Re: Beaglebone Black + Audio codec TLV320AIC3106

2016-05-01 Thread J dog
Probably something of this nature will work. amixer -c sset 'Left HP Mixer DACL1' off # HP Left route disable amixer -c sset 'Right HP Mixer DACR1' off # HP Right route disable amixer -c sset 'Left Line Mixer DACL1' on # Line out Left enable amixer -c

[beagleboard] Re: BeagleBone Black Audio

2014-04-17 Thread mattnmusic4
Hi Victor: The SoundsCape by Simple Media Networks may be just what you are looking for: http://kck.st/1jumP8o http://t.co/6b8zq7Ymm7 This cape provides line out Headphone out with some very nice mixing features. On Thursday, April 25, 2013 5:40:48 AM UTC-4, victor@gmail.com wrote:

Re: [beagleboard] Re: BeagleBone Black Audio Cape Buffer Overruns

2014-01-16 Thread Jack Mitchell
On 13/01/14 19:04, Jack Mitchell wrote: On 13/01/2014 18:40, eze_rg wrote: The best temporary solution that worked for me was using SoX for recording audio (instead of the arecord command). I get just a few buffer overruns, once in a while But, definitely, this is not a solution. It would

Re: [beagleboard] Re: BeagleBone Black Audio Cape Buffer Overruns

2014-01-16 Thread Jack Mitchell
I think the dma transfers that are happening due to writing to the uSD/eMMC are causing high latency in the IRQ's, which therefore stops data being pulled out of the buffer and as such overrunning. I think there are a couple of factors to it in all honesty and this is just a quick fix, but to

[beagleboard] Re: BeagleBone Black Audio Cape Buffer Overruns

2014-01-13 Thread eze_rg
The best temporary solution that worked for me was using SoX for recording audio (instead of the arecord command). I get just a few buffer overruns, once in a while But, definitely, this is not a solution. It would be nice if someone could clarify this issue. Regards, Ezequiel -- For

[beagleboard] Re: BeagleBone Black Audio Cape Buffer Overruns

2014-01-13 Thread Jack Mitchell
On 13/01/2014 18:40, eze_rg wrote: The best temporary solution that worked for me was using SoX for recording audio (instead of the arecord command). I get just a few buffer overruns, once in a while But, definitely, this is not a solution. It would be nice if someone could clarify this

[beagleboard] Re: Beaglebone Black Audio Cape LCD7 == Flashing (HDMI/eMMC disabled by uEnv.txt

2013-12-14 Thread seth . jeacopello
Not that it helps any, but I'm also running into this with a similar setup (LCD7 A3 though and the default Angstrom distribution on a BBB A5C as well. Still investigating - let me know if you've found any resolution since you posted this. On Tuesday, August 13, 2013 1:58:56 PM UTC-4,