What did the output from your FTDI cable show you? Did you look at the
documentation (http://beaglesnes.sourceforge.net/BeagleSNES_Guide.pdf)? If
so, what did you try from the troubleshooting section (section 4.1, pages
23 and 24)? Are you using an HDMI display with audio or only video (like a
Thanks a lot all the answers. I will read the documentation and do all the
tests and return tomorrow. I used HDMI DVI cabel. I used the same step and
software to create SD card as BBB advised.
Em 28/09/2014 11:59, Andrew Henderson hende...@icculus.org escreveu:
What did the output from your FTDI
If you are converting to DVI, then you are probably using a computer
monitor without audio. BeagleSNES forces its resolution to 720x480, which
is a CEA video mode that support both audio and video for HDMI televisions
(480i). A standard computer monitor will typically not support this mode,
Thanks Andrew you where correct. I just try it with an hdmi HDMI and it was
just OK. I will try to show it on a meeting for 200people next month. Hope
Evert thing works fine ;)
Em 28/09/2014 12:24, Andrew Henderson hende...@icculus.org escreveu:
If you are converting to DVI, then you are
Hello
I think you'll need to provide more information if you are looking for help
here.
What are the symptoms and what have you tried?
On Saturday, 27 September 2014 15:33:21 UTC+2, marcus silva wrote:
Hi. My beaglebone black does not work. It just doesnot boot. Any one have
the same
://www.packtpub.com/building-a-home-security-system-with-beaglebone/book
From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On
Behalf Of DLF
Sent: Saturday, September 27, 2014 8:28 PM
To: beagleboard@googlegroups.com
Subject: [beagleboard] Re: Beaglenes doesnot boot
