Hi Everyone,
I've been working with a Beaglebone Black recently and its eQEP peripheral;
running into an issue where it works great when I manually configure it (with
the config-pin command), but not when I set the pins up with a .dtbo...
First, here's my system info:
[root@beaglebone]> u
Hello Everyone,
I am not able to enable ADC overlay, I am not sure what I am doing wrong:
dtb=am335x-boneblack.dtb
enable_uboot_overlays=1
disable_uboot_overlays_emmc=1
disable_uboot_overlays_video=1
disable_uboot_overlays_audio=1
disable_uboot_overlays_wireless=1
#disable_uboot_overlays_adc=1
I 'm trying to load an overlay we've written: EBB-PRU-ADC4.dtbo which
worked on an old version of Debian. It has been copied to ./lib/firmware. I
edited /boot/uEnv.txt: uncommentine the line:
dtb_overlay=/lib/firmware/EBB-PRU-ADC4.dtbo
This was a mistake, because now the BBB won't boot normally
Can someone tell me why I can blink LED_RED on the Beaglebone Blue (P8_7),
but when I try the same thing in Bonescript I get:
ocp:P8_07_pinmux was not found under /sys/devices/platform/ocp
On Monday, May 1, 2017 at 11:07:34 AM UTC-4, RobertCNelson wrote:
>
> Hey Everyone,
>
> It's that time, U-
On Wed, May 17, 2017 at 11:17 PM, wrote:
> Hello Everyone,
>
> I am not able to enable ADC overlay, I am not sure what I am doing wrong:
First see:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays
and verify you are running the latest version of u-boot:
>
> dtb=am335x-bon
Robert, thank you!
I do not know why but after I upgraded U-boot to the latest version, I was
not able to set Ethernet connection through USB.
I will try one more time later today.
On Thursday, May 18, 2017 at 3:07:52 PM UTC-7, RobertCNelson wrote:
>
> On Wed, May 17, 2017 at 11:17 PM, >
> wro
Actually, my goal is to 1) enable pru, and use pins: p8_11 for output and
p8_16, p8_15, and p9_24 for input;
2) enable ADC overlay.
3) disable everything esle.
Thank you.
On Thursday, May 18, 2017 at 3:07:52 PM UTC-7, RobertCNelson wrote:
>
> On Wed, May 17, 2017 at 11:17 PM, >
> wrote:
> >
I tried to use bone-debian-8.7-lxqt-4gb-armhf-2017-03-19-4gb.img.xz and I
had problems described here:
https://groups.google.com/forum/#!topic/beagleboard/FasKfwC_2Z8
I get:
fatal: unable to access '
https://github.com/StrawsonDesign/Robotics_Cape_Installer.git/': Failed to
connect to github.co
I fixed apt-get on beaglebone by running :
su (or sudo su)
sudo sh -c "echo nameserver 8.8.8.8 > /etc/resolv.conf"
checked with cat /etc/resolv.conf".
On Saturday, May 20, 2017 at 4:42:47 PM UTC-7, fedor...@gmail.com wrote:
>
> I tried to use bone-debian-8.7-lxqt-4gb-armhf-2017-03-19-4gb.img.xz an
On Mon, Dec 4, 2017 at 7:31 PM, wrote:
> Can someone tell me why I can blink LED_RED on the Beaglebone Blue (P8_7),
> but when I try the same thing in Bonescript I get:
>
> ocp:P8_07_pinmux was not found under /sys/devices/platform/ocp
LED is a different sub-system..
Regards,
--
Robert Nelso
Robert,
I really appreciate what you do for the community. However, your answer to
my question was less than helpful. What troubles me is that you have a
better answer, but for some reason you felt you need to marginalize me.
Bottom line, I don't know why in the hell one would turn on uboot ove
On Dec 31, 2017 9:53 PM, "Samuel Fugarino" wrote:
Robert,
I really appreciate what you do for the community. However, your answer to
my question was less than helpful. What troubles me is that you have a
better answer, but for some reason you felt you need to marginalize me.
Bottom line, I don't
12 matches
Mail list logo
