On Wednesday, February 18, 2015 at 9:27:07 PM UTC, thek...@gmail.com wrote: > > I have P8_43 (Pin 42) set up for 0x00000005 in a device tree overlay > however my board fails to boot when the pin is connected to my circuit. I > have other pins with the same setup and in the same circuit configurtion > that work fine, and I have swapped around the board pin/breadboard pins so > I know for sure it is the pin the p8_43 header connection causing the > problem. This is also the first time I have connected anything to this > particular pin. Is the pin dead, or could it's default mode before loading > my .dtbo be causing the problem? > > The power and ethernet LEDs light up but none of the USER LEDs do, and I > cannot ssh into it. When I disconnect the p8_43 header connection > everything boots fine. I have also checked to make sure the pin is indeed > set correctly in my overlay and there are no errors in loading the overlay. >
doh, just read the SRM. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.