thanks for ur help ;)
i was successfull to connect to the beaglebone with ssh just using the ip
address.
the i tried to setup a automatic ntp update and now there no way to connect
to the bbb by sss - not by wifi and not by the usb cable.
any idea whats wrong?
i removed the ntp on my bbb and
look at the output from:
# netstat -lan | grep tcp
- Is the SSH service set to listen on any IP 0.0.0.0:22?
- If you note the IP of the wlan0 connection then disconnect the USB cable
can you connect (assuming you are not powering it via USB)?
- Can you connect on SSH to the eth0 ip when
Looks like your wifi IP address is 192.168.2.101. You should be able to ssh
into there.
As far as the Edimax wifi adapter goes (I have the EW-7811Un) you'll be
initially successful, but after an hour or so of inactivity, the link will
die. The entire wlan0 link will die - no ping, no ssh,
In addition to what Dieter said about using a fixed IP address with your
router's DHCP, you'll need your MAC address for your USB wifi gizmo; that's
the HWaddr in the output of ifconfig, the stuff with 2 characters with
colons between.
On Friday, February 7, 2014 7:47:45 AM UTC-8,
