Hello Robert,
Is the R444 a reference to the resistor number or is this actually a
surface mount with a resistance of 444 ohms?
I'm not sure I have the dexterity or vision to solder that small of a
component back on and I'm not that old.
It sounds like my best bet would be to wait for
On Sun, Oct 1, 2017 at 5:22 PM, wrote:
> Hello Robert,
>
> Thank you for the reply. Let me first make sure that I have followed the
> correct procedure for booting from eSATA. Please review and let me know if I
> did anything wrong or I missed a step...
>
> 1. R444
Hello Robert,
Thank you for the reply. Let me first make sure that I have followed the
correct procedure for booting from eSATA. Please review and let me know if
I did anything wrong or I missed a step...
1. R444 resistor removed
2. Jumper placed on J3 between 1-2 and soldered
3. X15 debian
On Sun, Oct 1, 2017 at 10:05 AM, wrote:
> Sounds like I may missing something. I'm assuming u-boot would be on the
> debian image written to the SATA drive via dd?
Sure, if you "patch" u-boot and "build" it for that situation, it
would work. The current U-Boot binary
Of mab.mobile...@gmail.com
Sent: Sunday, October 1, 2017 10:05 AM
To: BeagleBoard <beagleboard@googlegroups.com>
Subject: Re: [beagleboard] X15 Boot via USB
Sounds like I may missing something. I'm assuming u-boot would be on the debian
image written to the SATA drive via dd? Do I need to i
t; *From:* beagl...@googlegroups.com [mailto:
> beagl...@googlegroups.com ] *On Behalf Of *
> mab.mo...@gmail.com
> *Sent:* Saturday, September 30, 2017 8:47 PM
> *To:* BeagleBoard <beagl...@googlegroups.com >
> *Subject:* Re: [beagleboard] X15 Boot via USB
>
>
>
>
.
Gerald
From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On
Behalf Of mab.mobile...@gmail.com
Sent: Saturday, September 30, 2017 8:47 PM
To: BeagleBoard <beagleboard@googlegroups.com>
Subject: Re: [beagleboard] X15 Boot via USB
Hello Gerald,
I removed the re
Hello Gerald,
I removed the resistor and placed a jumper between J3 1-2 attached a sata
drive with a new debian image written via dd and am unable to boot. I'm
getting a blank screen and the power LED comes on and the LED between the
power connector and the RAM illuminates for just a few
@googlegroups.com [mailto:beagleboard@googlegroups.com] On
Behalf Of mab.mobile...@gmail.com
Sent: Thursday, September 28, 2017 12:10 PM
To: BeagleBoard <beagleboard@googlegroups.com>
Subject: Re: [beagleboard] X15 Boot via USB
[https://lh3.googleusercontent.com/-JJzoRGronFw/Wc0snO3IbZI/A
nboard.
>
>
>
> Gerald
>
>
>
>
>
> *From:* beagl...@googlegroups.com [mailto:
> beagl...@googlegroups.com ] *On Behalf Of *
> mab.mo...@gmail.com
> *Sent:* Thursday, September 28, 2017 9:44 AM
> *To:* BeagleBoard <beagl...@googlegroups.com >
Of *
> mab.mo...@gmail.com
> *Sent:* Thursday, September 28, 2017 9:44 AM
> *To:* BeagleBoard <beagl...@googlegroups.com >
> *Subject:* [beagleboard] X15 Boot via USB
>
>
>
> Hello,
>
> I just purchased an X15 and the EMMC memory is rapidly filling up.
>
> 1. Is th
erald
>
>
> From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On
> Behalf Of mab.mobile...@gmail.com
> Sent: Thursday, September 28, 2017 9:44 AM
> To: BeagleBoard <beagleboard@googlegroups.com>
> Subject: [beagleboard] X15 Boot via USB
&
the default which is set
by the resistors onboard.
Gerald
From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On
Behalf Of mab.mobile...@gmail.com
Sent: Thursday, September 28, 2017 9:44 AM
To: BeagleBoard <beagleboard@googlegroups.com>
Subject: [beagleboard] X15 Boot via USB
Hello,
I just purchased an X15 and the EMMC memory is rapidly filling up.
1. Is there a way to boot from an external USB hard drive?
or
2. Can someone provide more detail directions on switching boot sequence to
boot directly from eSATA?
The reference manual is very vague on this. You need to
14 matches
Mail list logo