Thanks Andrew you where correct. I just try it with an hdmi HDMI and it was
just OK. I will try to show it on a meeting for 200people next month. Hope
Evert thing works fine ;)
Em 28/09/2014 12:24, "Andrew Henderson" escreveu:
> If you are converting to DVI, then you are probably using a computer
If you are converting to DVI, then you are probably using a computer
monitor without audio. BeagleSNES forces its resolution to 720x480, which
is a CEA video mode that support both audio and video for HDMI televisions
(480i). A standard computer monitor will typically not support this mode,
m
Thanks a lot all the answers. I will read the documentation and do all the
tests and return tomorrow. I used HDMI DVI cabel. I used the same step and
software to create SD card as BBB advised.
Em 28/09/2014 11:59, "Andrew Henderson" escreveu:
> What did the output from your FTDI cable show you?
And do you have access to a USB-Serial cable that you can connect to the debug
port ??
"No one could make a greater mistake than he who did nothing because he could
do only a little."
"All that is necessary for the triumph of evil is that good men do nothing"
Edmond Burke (1729 - 1797)
htt
