Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Soussi Adnane
Sendt: 7. marts 2014 18:37
Til: BLFS Support List
Emne: Re: [blfs-support] Yum help
actually i've built yum from source without rpm
--
Adnane Soussi
Hi
Hi all,
I have build KDE with wpa_supplicant with D-bus support and DHCP-4.2.5-P1. At
boottime both my network adaptors are assigned IPs correctly.
But I cannot access the internet through the wireless network. When I start
wpa_supplicant, I cannot select an adapter or a network (both
Niels Terp wrote:
wlan0: flags=4163UP,BROADCAST,RUNNING,MULTICAST mtu 1500 metric 1
inet 192.168.0.13 netmask 255.255.255.0 broadcast
192.168.0.255
Seeing this, I would conclude that wpa_supplicant and dhclient wlan0 work
fine. What is your problem ?
Pierre
The problem
Niels Terp wrote:
The problem is, that when I start the wpa_supplicant program (and an
icon was automatically installed in the notification area), the
program opens OK, but only displays Status: Could not get status from
wpa_supplicant. Apart from that, the program seems dead, I cannot
wpa_supplicant is there to allow your wifi interface to associate with a
wifi access point in negociating the required authentification elements,
nothing more.Once the association is successful dhclient asks the access
point to provide an IP adress to the wifi interface.
To test wlan interface,
Do you have wireless_tools-29 installed ? Does the file /proc/net/wireless
exist ?
Pierre
Yes to both.
Niels
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
Hi there,
Now I have completed the full chapter 25 - X Libraries, and I have installed
both QT4 and QT5, and I have also installed qtchooser and configured QT4 to
be the default.
Now in KDE, when I attempt to build attica, I get the error:
CMake Error at CMakeList.txt:10 (find_package):
Could
Hi all,
As I mentioned yesterday, I am working on creating a build script that
builds X-org, X-libs and KDE as RPM's. All of this is based on Baho Utots
build system that builds LFS with RPM. I have just adapted the scripts, and
expanding them here and there.
My problem yesterday was that I
On Fri, Jan 10, 2014 at 9:06 AM, Niels Terp mailto:nielst...@comhem.se
nielst...@comhem.se wrote:
Hi all,
.
Warning: Cannot open ConsoleKit session: Unable to open session: The
permission of the setuid helper is not correct.
.
Can anybody help ? Which file is the setuid helper anyway
Hi there,
I'm trying to compile XULrunner, with little succes. I have build the whole
X-libraryes chapter of BLFS 7.4, but this last package fails. I have all
required and recommended deps, and all optional deps except hunspell and
wireless tools.
Compilation, or rather configuration ends like
Am Mittwoch, 8. Januar 2014, 20:46:41 schrieb Niels Terp:
Hi there,
I'm trying to compile XULrunner, with little succes. I have build the
whole X-libraryes chapter of BLFS 7.4, but this last package fails. I
have all required and recommended deps, and all optional deps except
hunspell
I have a general question about dependencies in BLFS:
In the instructions for harfbuzz it is stated that even if some dependencies
are recommended and not required, the results may not be as expected if not
installed. So ofcause I install them before I install harfbuzz.
But other packages, can
Hi everybody,
In the latest stable BLFS ver. 7.4 there is a few dead links:
In BLFS Boot Scripts:
http://www.linuxfromscratch.org/blfs/downloads/svn/blfs-bootscripts-20130908.tar.bz2
In NSS:
http://www.linuxfromscratch.org/patches/blfs/svn/nss-3.15.1-standalone-2.patch
Where can I find
Hi,
I have lately played a little around with baho-utot's build system that
build LFS with RPM. That works great. One addition I always make in the end,
is that I install OpenSSL, OpenSSH and Wget. That also used to work fine. I
install it manually after the build script finish, and after logging
Hi,
I have now got this script to work, and it works great ! I do have a few
questions though.
First of all I get a md5sum error on the lfs-bootscripts and tzdata2013c,
and the nss-3.14.3-standalone-1.patch has been moved. Those things I have
just corrected / ignored.
But then the
Hi,
I have now got this script to work, and it works great ! I do have a few
questions though.
First of all I get a md5sum error on the lfs-bootscripts and tzdata2013c,
and the nss-3.14.3-standalone-1.patch has been moved. Those things I have
just corrected / ignored.
But then the
Hi all,
I need to install Lua as a dependency for RPM. In this version of BLFS the
link to a required patch
http://www.linuxfromscratch.org/patches/blfs/svn/lua-5.2.2-shared_library-1
.patch
http://www.linuxfromscratch.org/patches/blfs/svn/lua-5.2.2-shared_library-1.
patch
is dead.
On 2013-07-19 10:38, Niels Terp wrote:
Hi all,
I need to install Lua as a dependency for RPM. In this version of BLFS
the link to a required patch
HTTP://WWW.LINUXFROMSCRATCH.ORG/PATCHES/BLFS/SVN/LUA-5.2.2-SHARED_LIBR
ARY-1.PATCH
[1]
is dead. I also don't find the patch on
http
Hi,
I have now installed RPM, and it seems to work. But when I tried to install
Webmin from a RPM, I got errors like Webmin .. needs /bin/sh
I found a very nice script (in the Linux Cookbook) to find things that has
been compiled from source, and include them in a emty RPM, which can then
On 07/19/2013 10:47 AM, Niels Terp wrote:
Hi,
I have now installed RPM, and it seems to work. But when I tried to install
Webmin from a RPM, I got errors like Webmin .. needs /bin/sh
I found a very nice script (in the Linux Cookbook) to find things that has
been compiled from source
Hi all,
I'm having big problems making akonadi work. When I first build KDE (and
akonadi) I only had SQLite installed. Akonadi gave the well known error with
Boost Join, but I found that this problem seems to be solved in Akonadi 1.9.80.
Build without any problems, but when KDE was ready, I
Hi all,
I think I have found an error in the instructions for Firefox 21.
I had realy big problems building Firefox against XULRunner. Make went well,
but install failed because the directory firefox-build-dir did not exist.
I was taking a close look at the suggested mozconfig file, and
Thanks, Armin,
I wanted to write as in your lines above, but my mind always gets only the
idea, and for the details (essential, in this case), I have to test which
way is the correct one. So, I could not remember if it was with or without
quotes.
When I first replied to Niels weeks ago, I had
Hi all,
Now that my Firefox is working, even with java, I want to put the finishing
touch: Gnash.
When I configure gnash, it tells me that a lot is missing, but it should
still compile - and most of the missing stuff is only used in testing. But
the dependency Speex-1.2rc1 is not found - even
Hi all,
Now that my Firefox is working, even with java, I want to put the finishing
touch: Gnash.
When I configure gnash, it tells me that a lot is missing, but it should
still compile - and most of the missing stuff is only used in testing. But
the dependency Speex-1.2rc1 is not found - even
Hi all,
I have (again) build KDE, and this time almost everything works. But I still
have a few questions:
I am using Network Manager, and it works fine but for two small details. When
NM displays wireless networks, it shows the red No access icon - even after I
have logged in to my local
I have been following BLFS Version 2013-06-19 to build this, but compilation
stops during make:
/usr/lib/libcairo-gobject.so /usr/lib/libcairo.so
/usr/lib/libgdk_pixbuf-2.0.s/usr/lib/libsoup-2.4.so
/usr/lib/libgio-2.0.so /usr/lib/libgobject-2.0.so /usr lib/libglib-2.0.so
-pthread
Emne: Re: [blfs-support] Has anybody been able to build WebKitGTK+ - 2.0.2
It's a bit problematic. Harfbuzz 0.9.18 has split hb_icu_* functions
into seperate library - libharfbuzz-icu.so. WebKitGTK+ 2.0.3 should
fix the issue (a patch is required for 2.0.2).
For anyone interested, this is
, Niels Terp wrote:
Hi all,
Tried to compile gst-plugins-good, configuration is OK, I have all
deps installed. But make ends in:
CC libgstvideo4linux2_la-gstv4l2vidorient.lo
CC libgstvideo4linux2_la-v4l2_calls.lo
v4l2_calls.c: In function 'gst_v4l2_fill_lists':
v4l2_calls.c:58:26
Hi all,
Tried to compile gst-plugins-good, configuration is OK, I have all deps
installed. But make ends in:
CC libgstvideo4linux2_la-gstv4l2vidorient.lo
CC libgstvideo4linux2_la-v4l2_calls.lo
v4l2_calls.c: In function 'gst_v4l2_fill_lists':
v4l2_calls.c:58:26: error:
Good morning friends,
I have a strange problem with Firefox 21.0 build by the instructions in BLFS
Version 2013-06-19:
I have installed all deps and XULRunner. Building takes a very long time
(far longer than last time I linked to XULRunner), but after some hours the
build finishes succesfull.
Good morning friends,
I have a strange problem with Firefox 21.0 build by the instructions
in BLFS Version 2013-06-19:
I have installed all deps and XULRunner. Building takes a very long
time (far longer than last time I linked to XULRunner), but after some
hours the build finishes
at 12:47:45PM +0200, Niels Terp wrote:
Hi Fernando,
Thank you for your answer. I do have mk_add_options
MOZ_OBJDIR=@TOPSRCDIR@/firefox-build-dir in mozconfig.
Now, I could try to change it, but considering the other problems I
have decided to install the 20.0 version instead.
Again
Niels Terp wrote:
Is it not possible to use dhcpcd on two different NIC's at the same time ?
If not, I can live with a static IP. But how do I then set the IP's
for DNS ?
If you have 1 internet connection you wish to access trough 2 interfaces you
may install the kernel bonding driver (see
Hi everyone,
I am working with BLFS Version 2013-06-18 on a Thoshiba laptop. The machine
has a RTL 8169 wired NIC and a RTL 8723ae wireless NIC. I have installed
Wireless tools-29 and wpa_supplicant-2.0. Also Network Manager 0.9.8.0, wich
wpa_supplicant is supposed to use (and I have configured
Niels Terp wrote:
This seems to go on forever, and it slows the boot down to a point
where I cannot mount NFS drives, and sometimes even the wired network
doesn't start up.
Don't let the wifi connection come up at boot time: ONBOOT=no.Try connecting
manually without NM :
ip link set
Hi there,
I have a problem compiling Network Manager 0.9.8.0 following BLFS
2013-06-05:
I do not have IP Tables installed, so I have passed the --without-iptables
parameter to config. Config works fine but make ends after a second or so
in:
nm-connection.c:105:1: note: in expansion of macro
On 06/12/2013 08:13 PM, Niels Terp wrote:
Hi there,
I have a problem compiling Network Manager 0.9.8.0 following BLFS
2013-06-05:
I do not have IP Tables installed, so I have passed the
--without-iptables parameter to config. Config works fine but make
ends after a second or so
in:
nm
nm-connection.c:105:1: note: in expansion of macro 'G_DEFINE_TYPE'
G_DEFINE_TYPE (NMConnection, nm_connection, G_TYPE_OBJECT)
^
cc1: all warnings being treated as errors
make[4]: *** [libnm_util_la-nm-connection.lo] Error 1
make[4]: Leaving directory
-Oprindelig meddelelse-
Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Armin K.
Sendt: 12. juni 2013 21:31
Til: BLFS Support List
Emne: Re: [blfs-support] Can not compile Network Manager
On 06/12/2013 09:27 PM, Niels Terp
-Oprindelig meddelelse-
Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Armin K.
Sendt: 12. juni 2013 21:31
Til: BLFS Support List
Emne: Re: [blfs-support] Can not compile Network Manager
On 06/12/2013 09:27 PM, Niels
Boah. No problems should persist with Glib 2.36.x because that's the
version I tested NM instructions against. I am not really sure what
your problem is. You can try removing -Werror by issuing something
like find . -name Makefile | xargs sed s@ -Werror@@g after you've
ran NM configure.
Hi all,
There seems to be a problem with the instructions for installing the binary
version of OpenJDK. The initial installation is OK, but then I come to set
the CLASSPATH and PATH env variables. From BLFS Version 2013-06-05:
export CLASSPATH=.:/usr/share/java
export
Hi all,
There seems to be a problem with the instructions for installing the
binary version of OpenJDK. The initial installation is OK, but then I
come to set the CLASSPATH and PATH env variables. From BLFS Version
2013-06-05:
export CLASSPATH=.:/usr/share/java
export
Hi all,
Have just installed SAMBA, following BLFS Version 2013-06-05. Everything
compiles fine, I have the depends in place. When I try to create the user /
group I am told that they already exists.
On boot I get
Starting nmdb FAIL
Starting smdb FAIL
Any suggestions ?
--
On Jun 9, 2013, at 7:18 AM, Niels Terp wrote:
Hi all,
Have just installed SAMBA, following BLFS Version 2013-06-05.
Everything
compiles fine, I have the depends in place. When I try to create the
user / group I am told that they already exists.
On boot I get
Starting nmdb FAIL
On Jun 9, 2013, at 7:18 AM, Niels Terp wrote:
Hi all,
Have just installed SAMBA, following BLFS Version 2013-06-05.
Look at the smbd/nmbd logs in /var/log/
Also, verify your samba configuration.
Sincerely,
William Harrington
---
This is kind of strange and embarrasing, I checked
Hi all,
I have set up my LFS as a NFS client, and accessing my NAS that way. If I
manually mount (and unmont) the drive, everything works fine.
But then I wanted the drive to be mounted automatically during boot, which it
has done before. But when I boot, it takes a very long time, then I get:
I use this line in fstab:
heroix.lan:/home /home nfs _netdev,nfsvers=3,auto,defaults
I think _netdev is relevant here.
Yes it is. Also remove auto. NFS mounts are brought up by the netfs
(priority 28) boot script after rpcbind (priority 22) and nfs_client
(priority 24). See
Hi,
I'm having a very strange problem with kernel 3.9.2:
I compile the kernel, it works fine but a few problems I would like to correct.
I save my .config file, and do a make mrproper.
If now I do a make menuconfig I should - as I understand it - be able to start
from scratch. But all my
:
On 05/18/2013 10:13 AM, Niels Terp wrote:
Hi,
I'm having a very strange problem with kernel 3.9.2:
I compile the kernel, it works fine but a few problems I would like to
correct. I save my .config file, and do a make mrproper.
If now I do a make menuconfig I should - as I understand
Hi,
It seems that akonadi wants to use MySQL, even if it is not installed.
I found how to disable that:
Open ~/.config/akonadi/akonadiserverrc, and leave only:
[%General]
Driver=QSQLITE3
Then restart akonadi (or any application which is akonadi aware, for example
kmail).
Hi there !
I have been working at KDE for some time now, and finally everything works -
allmost.
My first problem was to make Bluetooth work. I had installed the blueman-1.23 +
all dependencies, I got a very nice Bluetooth icon in the KDE desktop - and
absolutely nothing happened when I
Hi,
During compilation of kde-baseapps, all needed and all optional packages are
found, and the compilation starts. But then:
[ 6%] Building CXX object
dolphin/src/CMakeFiles/dolphinprivate.dir/kitemviews/kfileitemmodelrolesupda
ter.o
Are you building withing the source directory or within a subdirectory of
source directory as the book says? I've seen this error if you do the
former.
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above
-Oprindelig meddelelse-
Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Pierre M.R.
Sendt: 7. april 2013 09:07
Til: BLFS Support List
Emne: Re: [blfs-support] Blueman can not start - test fail in GTK+-2.24.17
Niels Terp wrote
-Oprindelig meddelelse-
Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Pierre M.R.
Sendt: 7. april 2013 10:12
Til: BLFS Support List
Emne: Re: [blfs-support] Blueman can not start - test fail in GTK+-2.24.17
Niels Terp wrote
-Oprindelig meddelelse-
Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Pierre M.R.
Sendt: 7. april 2013 10:53
Til: BLFS Support List
Emne: Re: [blfs-support] Blueman can not start - test fail in GTK+-2.24.17
Niels Terp wrote
-Oprindelig meddelelse-
Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Niels Terp
Sendt: 7. april 2013 11:24
Til: 'BLFS Support List'
Emne: Re: [blfs-support] Blueman can not start - test fail in GTK+-2.24.17
-Oprindelig meddelelse-
Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Pierre M.R.
Sendt: 7. april 2013 13:40
Til: BLFS Support List
Emne: Re: [blfs-support] Blueman can not start - test fail in GTK+-2.24.17
Niels Terp wrote
When I compile GTK2+-2.24.17, following BLFS Version 2013-03-31, one of the
tests are failing. Here is my testsuite.log:
==
gtk+ 2.24.17: gtk/test-suite.log
==
# TOTAL: 3
# PASS: 2
# SKIP: 0
# XFAIL: 0
# FAIL: 1
#
OK, I think I need to clarify this a bit. What I am trying to do is to use
Bluetooth from xfce. I have compiled Blueman and all its dependencies, the
only errors I got was the GTK+ error listed below.
I found some directions on the net, and I am trying to start Blueman with
ck-launch-session
I have a NAS with a NFS server, and I want to access it from my LFS machine.
I have followed the instructions in BLFS Version 2013-03-27:
-I configured the kernel
- I installed NFS Utilities 1.2.6
-I modified my /etc/fstab to:
/dev/sda1 /ext3defaults,acl,user_xattr
, Niels Terp wrote:
I have a NAS with a NFS server, and I want to access it from my LFS machine.
I have followed the instructions in BLFS Version 2013-03-27:
-I configured the kernel
- I installed NFS Utilities 1.2.6
-I modified my /etc/fstab to:
/dev/sda1 /ext3defaults
Hi,
I have come across what I believe is an error in Beyond LinuxR From Scratch
- Version 2013-03-27:
From the script:
if [ -d /etc/openldap/schema ]; then
install -v -m644../examples/LDAP/README \
/etc/openldap/schema/README.LDAP
install -v
Tyrer tyr...@acm.org
mailto:tyr...@acm.org wrote:
On 04/01/2013 11:59 AM, Niels Terp wrote:
Hi,
I have compiled all the required and the recommended
dependencies, and all
the optional but MathML.
I then compile WebKitGTK+ straight from the book
:29PM +0200, Niels Terp wrote:
Hi,
I have compiled all the required and the recommended dependencies, and
all the optional but MathML.
I then compile WebKitGTK+ straight from the book. After compiling for
several hours, it stops with this error:
CXXLD Programs/WebKitPluginProcess
/usr
Hi,
During the initial cmake step I get:
-- No backend for KAuth was explicitly specified: probing system to find the
best one available
-- Found PolkitQt-1: /lib/cmake/PolkitQt-1/PolkitQt-1Config.cmake (Required
is at least version 0.99.0)
-- Building PolkitQt-1 KAuth backend
CMake Error at
PM, Niels Terp wrote:
Hi,
I was compiling this package, but the build failed without
GPGME-1.3.2, which is listed as an optional dependency.
Just FYI :-)
Niels
That's pretty interesting. However you didn't explain what part failed.
It would be nice to know where is the problem. GPGME
Hi,
When I test at-spi2-core-2.6.3, I get the error:
process 19874: arguments to dbus_bus_get_unique_name() were incorrect,
assertion connection != NULL failed in file dbus-bus.c line 813.
This is normally a bug in some application using the D-Bus library.
D-Bus not built with -rdynamic so
-Oprindelig meddelelse-
Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Sven
Bartscher
Sendt: 14. marts 2013 18:48
Til: blfs-support@linuxfromscratch.org
Emne: [blfs-support] line breaks in terminal
hey guys!
I finished the
Hi,
I was compiling this package, but the build failed without GPGME-1.3.2,
which is listed as an optional dependency.
Just FYI :-)
Niels
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information
at 14:21 +0100, Niels Terp wrote:
And much to my surprise, even after a munual sh
/etc/profile.d/xorg.sh the variables STILL don't contain anything.
That will *never* work. Running sh filename will simply start a new
process which reads the file, sets those variables in that process, then
exits
Hi,
I have started on Xorg - but even with the very first packet I run into
trouble:
The book suggest to create a file /etc/profile.d/xorg.sh with the following
command:
cat /etc/profile.d/xorg.sh EOF
XORG_PREFIX=PREFIX
XORG_CONFIG=--prefix=$XORG_PREFIX \
--sysconfdir=/etc \
:13 PM, Carl Thorn wrote:
--
--
*From:* Niels Terp nielst...@comhem.se
*To:* BLFS Support List blfs-support@linuxfromscratch.org
*Sent:* Tue, March 12, 2013 8:22:28 AM
*Subject:* [blfs-support] Compilation presets for Xorg
Hi again,
I have now got my environment set up properly, and I have built the first
few xorg packages. But libxslt-1.1.28 is giving a fault on make:
make[2]: Forlader katalog '/home/niels/xc/libxslt-1.1.28/xsltproc'
Making all in doc
make[2]: Går til katalog '/home/niels/xc/libxslt-1.1.28/doc'
-Oprindelig meddelelse-
Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Armin K.
Sendt: 12. marts 2013 21:53
Til: BLFS Support List
Emne: Re: [blfs-support] Can not make libxlst
On 03/12/2013 09:48 PM, Niels Terp wrote:
Hi
-Oprindelig meddelelse-
Fra: blfs-support-boun...@linuxfromscratch.org
[mailto:blfs-support-boun...@linuxfromscratch.org] På vegne af Armin K.
Sendt: 12. marts 2013 22:02
Til: BLFS Support List
Emne: Re: [blfs-support] Can not make libxlst
On 03/12/2013 09:59 PM, Niels Terp wrote
, 2013 11:36 AM, Niels Terp nielst...@comhem.se wrote:
Hi,
I have just finished LFS 7.3 with a very good result, and now I want to
continue with BLFS.
I have already installed Open-SSH, wget and Apache webserver, which all
works well.
But Im having a hard time compiling proftpd
, Niels Terp wrote:
Yes, I had overlooked, that if I’m going to compile anything as an
unpriviledged user, the files better be owned by that user (so I
suppose you mean ‘chown group:user .’ ?).
1) Please don't top-post - it's much easier to read an email from top to
bottom, than bottom to top
2
80 matches
Mail list logo