Robert,
The good news is that it sounds like you have a standard GM
ignition system.
I have very little experience with these transverse mounted
drive packages but let's see what we can do.
The front three plugs are no problem unless some hero in the
past didn't put anti-seize compound on the ste
one thing you might want to look at is it easier to reach the plugs
from top or bottom or the car. i had a few cars that had to be done
from the bottom and one car that i actually had to pull the motor and
trans up a bit. Just to reach one plug. Just to remove the wire on
that one you had to ge
Yes, I am familiar with that. The unit I was looking for is more like a hand
circular saw.
- Original Message -
From: "John M" <[EMAIL PROTECTED]>
To:
Sent: Friday, September 21, 2007 1:15 AM
Subject: [BlindHandyMan] Re: SAW STOP the totally safe power saw
G'day Lenny,
SawStop LLC is
Larry
All very good information.
I have changed a lot of spark plugs so I am very fermiliar with all of these
tips.
Trouble is that I can not even get my hand back between the engine and the
fire wall to reach the plug wires. So it looks like I am going to have to
get undernieth and see if I can re
OK
I have found one sourse.
I don't know how good it is or how screen reader friendly it is.
What I found is that you can order for specific cars or trucks. It covers
1983 -2004 or 2005 I have forgotten which now.
One week is 9>95 one month is about $14 and one year is $25 or $29.
If any one wants
well, give us the web site so we can have a look.
-Original Message-
From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED]
Behalf Of robert moore
Sent: Friday, September 21, 2007 1:35 PM
To: blindhandyman@yahoogroups.com
Subject: [BlindHandyMan] Auto repair manuals online
OK
I
My son and I ran into a similiar problem a couple of summers. The trouble was
the ac breaker tripping. The first thing we did was take a amp reading when it
was running. It was around 27 on a 25 amp breaker. I figured the unit had
aged and was drawing more and the 25 breaker was sized too cl
In addition to converting tractors to run on batteries, Heckeroth's company,
Homestead Enterprises, has built several electric and solar-electric
tractors
from the ground up. In the late 1990s, the company created electric
prototypes for two major tractor manufacturers, Ford-New Holland and Eifr
Well we had a 02 Olds minivan with similiar problem. I let our mechanic change
them since I was pressed for time and had him changing a air conditioner
condenser coil at the same time. He said he got them from underneath using a
car lift. Auto Zone is supposed to have some type of car repair
QUESTION: How Do I Remove Broken Manifold Bolts? I have not had success in
the past using easy-outs.
Normally, there are no bolts holding the manifold assembly to the engine
block. The manifolds are mounted on heat treated studs using thirteen
seize-proof
nuts. You should be able to remove t
Interesting, I have a mechanic friend who broke off a manifold bolt. He
removed it with a very unique approach. he took an old screw driver and cut
off the end. He then put crazy glue on the tip. He then held it against the
broken stud. after about two minutes just turned out and tossed the old
No, just the outdoor side to fail. I don't know why the indoor one would do
that, I have never heard it double beep twice like that, just when it was due
to read the outdoor one. :) hmm! I'd still believe or tend too that the wires
are broken, and they can be twisted together and taped, it's sma
12 matches
Mail list logo
