I have seen these in England but I haven't ever seen them here in Canada.
Doesn't mean they aren't available of course but not any place I have bought
fittings.
- Original Message -
From: Shane Hecker
To: blindhandyman@yahoogroups.com
Sent: Saturday, February 23, 2008 10:54 PM
Dale. Do you have a postage scale? Maybe there is one at your office you
could borrow.
Regards.
Max. K 4 O D S.
Email: [EMAIL PROTECTED]
Transistor site http://www.funwithtransistors.net
Vacuum tube site: http://www.funwithtubes.net
Music site: http://www.maxsmusicplace.com
To subscribe to
I am sure that if you dug around a little in Nottingham, England, the centre of
the lace trade of the 18th and 19th centuries, you would find plenty of "old
lace"!
Jewel
-
From: Barry Levine
To: blindhandyman@yahoogroups.com
Sent: Sunday, February 24, 2008 1:02 PM
Subject:
I've heard of something called integral solder fittings (the solder is built
into the fitting). Where can you get them?
Shane
Wow!
First article said 8 :1 mix, this one now asks for 5:1.
I guess it really doesn't matter much. Like so many things, the experts
maintain that mystery but really they are so often full of sh*t.
Thanks.
- Original Message -
From: Bob Kennedy
To: blindhandyman@yahoogroups.c
Well that is about what I have done. It seems that precision isn't critical.
I'll assess the mix in the morning, I think I might thin it a little then apply
a couple of more coats rather than get it on too thick.
I am looking for a traditional oak finish.
- Original Message -
From
Thanks, I think this is probably the article I had seen before. It helps. We
will see how this works.
Again thanks.
- Original Message -
From: Ray Boyce
To: blindhandyman@yahoogroups.com
Sent: Saturday, February 23, 2008 8:35 PM
Subject: Re: [BlindHandyMan] Dissolving shellac
And here is an idea from your own country...
Marquetry Society of Canada - Finishing Techniques
PREPARATION
MIXING SHELLAC
There are various methods of measuring the mixture of alcohol and lac flakes.
Commercially it is done by weight. I have found that mixing by volume works
providing I crus
Dale, I found an article that said a good rate is 2 parts shellac to 16 parts
alcohol. So you can do the conversions from there. If you take a quarter cup
and flakes, call that 2 parts. Then you should get the correct cut by adding 4
cups of alcohol to the flakes.
- Original Message
Hi Dale
Try this
Let's reduce the mix proportionally by dividing both the shellac and the
alcohol to a manageable amount. Mix 2 ounces of shellac flakes (1 cup) into
1 pint
of alcohol. Since 1 gallon equals 8 pints of alcohol, and 16 ounces of
shellac flakes equals 1 pound, our 2 pound cut is cr
Thanks Ray,
I need something other than weight to calculate the amount of shellac flakes to
use.
There is something odd here. For some reason google won't work. I called a
friend not far from here, google works on her computer. All I get is that page
not found, server may be experiencing diffi
Hi Dale
I hope this helps.
balance of the alcohol. The consistency of shellac is
determined by "cut". A 3 lb. cut would be 3 lbs. of shellac
flakes per one gallon of high quality Denatured Alcohol
solvent. If you have never worked with shellac before it is
recommended that you start with a light co
I wonder if you can find old lace in the Earth's crust, as well?
Sorry... sometimes I just can't help myself.
--Barry
-Original Message-
From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED]
On Behalf Of Bob Kennedy
Sent: Saturday, February 23, 2008 5:48 PM
To: blindhandym
The sweet taste comes from the glycerol and the toxicity comes from the
denatured alcohol. Both are still present and animals (and people too) still
die when they drink it in sufficient quantities.
Now you really know!
- Original Message -
From: Bob Kennedy
To: blindhandyman@yaho
Did you know that is the ingredient in anti freeze that makes it so toxic? It
isn't present in the newer echo friendly formulas but it was added to help
harden the copper tubes in radiators. Don't know what gave anti freeze the
sweet taste that attracted animals tempting them to drink it. Bu
Hi,
Sorry for cross posting to the list and to Larry however I need a little
assistance.
I want to make up a two pound cut of dark garnet shellac. Usually you would
measure out the volume of alcohol and the weight of shellac flakes however I
don't have a suitable scale or the time to acquire o
ARSENIC
Arsenic (As) is a silver-gray metal that gained much of its notoriety
because of its historical use as a human poison (approximately 70 to 180
milligrams
of arsenic is fatal to an adult). Arsenic is present in the earth's crust at
an average concentration of 2 to 5 mg/kg, with low level
Activated carbon (AC) filters have been used in home
water purification systems primarily to remove taste and
odor. Taste and odor, although undesirable, are generally
not considered unhealthy. In recent years, however, AC
filters have been used to remove some of the contaminants
that have been dis
There are many species of bees, and virtually all are
beneficial through their activity as pollinators.
However, since bees are capable of stinging, they can
cause a considerable nuisance problem. Bees, as a group
can be distinguished from wasps by the covering of dense,
plumose body hairs.
Ground
A brownout occurs when the power supplier reduces
electrical voltage. This is done to force our appliances
and lights to use less electrical power (watts). The
lights will dim slightly. Generally, voltage reductions
are advertised on radio and television. When they occur
take the following steps:
Now this is a keeper all right.
David Ferrin
www.jaws-users.com
- Original Message -
From: "Ray Boyce" <[EMAIL PROTECTED]>
To:
Sent: Friday, February 22, 2008 11:27 PM
Subject: [BlindHandyMan] Getting the Most from Your Wheelchair Batteries
> Wheelchair batteries are different from car
22 matches
Mail list logo