Good evening,
I am beginning planning for a roll top desk. pretty well all of the designs I
see make the rolling top, also known as a tamber are made by gluing wood slats
to a sheet of denim. I have seen at least one many years ago with a pair of
ropes threaded through the slats but in my resea
ject: [BlindHandyMan] Joints for roll top tambers?
Good evening,
I am beginning planning for a roll top desk. pretty well all of the
designs I see make the rolling top, also known as a tamber are made by
gluing wood slats to a sheet of denim. I have seen at least one many
years ago with a pai
Dale, would a bit designed for dove tails work?
earlier, Dale Leavens, wrote:
>Good evening,
>
>I am beginning planning for a roll top desk. pretty well all of the
>designs I see make the rolling top, also known as a tamber are made
>by gluing wood slats to a sheet of denim. I have seen at leas
Dale,
I have, I think, seen such a roll top, but it's been many years and I'm not
sure if it was really seen or imagined.
What I remember is that the slats tapered down towards what I'd call the
leading edge and had a small, maybe 3/16Ths inch round on that edge as though
they'd had 3/4ths of a
as the fabric to which
the slats are attached.
Cy, the Ancient Okie...
_
From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED]
On Behalf Of John Schwery
Sent: Wednesday, September 12, 2007 7:09 AM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] Joints for roll top
door or the thin
wood on this new joint? Whitchever, but a interesting joint.
Ron
- Original Message -
From: Cy Selfridge
To: blindhandyman@yahoogroups.com
Sent: Wednesday, September 12, 2007 2:21 PM
Subject: RE: [BlindHandyMan] Joints for roll top tambers?
Hi Dale and
avens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: John Schwery
To: blindhandyman@yahoogroups.com
Sent: Wednesday, September 12, 2007 8:09 AM
Subject: Re: [BlindHandyMan]
eet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Tom Fowle
To: blindhandyman@yahoogroups.com
Sent: Wednesday, September 12, 2007 1:19 PM
Subject: Re: [BlindHandyMan] Joints for roll top tambers?
Dale,
I have, I think, seen such a rol
a, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Ron Yearns
To: blindhandyman@yahoogroups.com
Sent: Wednesday, September 12, 2007 3:50 PM
Subject: Re: [BlindHandyMan] Joints for roll top tambers?
As you have stated most of those doors slats are
Ancient Okie...
_
From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED]
On Behalf Of Ron Yearns
Sent: Wednesday, September 12, 2007 2:50 PM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] Joints for roll top tambers?
As you have stated most of those doors slats are
10 matches
Mail list logo