HI, Thinks for all the information on the pop rivet gun... Now I need any ideas
on how to cut a 6-inch round hole in a peace of sheet metal.. Y ears ago I
worked in a Plumbing and heating place and if I remember right one of the guys
used a thing where you drilled a hole in the center of what y
Rob,
I believe what you're referring to is a cutting tool arm. This is an arbor
with an "arm" attached that holds a lathe-type cutting tool on the end. The
arbor serves to hold the drill bit and also allows the "arm" to be adjusted
in radius to permit differing size holes to be cut. I would thi
groups.com
Sent: Wednesday, June 27, 2007 6:01 PM
Subject: [BlindHandyMan] cutting a hole
HI, Thinks for all the information on the pop rivet gun... Now I need any
ideas on how to cut a 6-inch round hole in a peace of sheet metal.. Y ears ago
I worked in a Plumbing and heating place and if
Sent: Wednesday, June 27, 2007 4:02 PM
To: blindhandyman@yahoogroups.com
Subject: [BlindHandyMan] cutting a hole
HI, Thinks for all the information on the pop rivet gun...
Now I need any ideas on how to cut a 6-inch round hole in a
peace of sheet metal.. Y ears ago I worked in a Plumbing
and he
PM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] cutting a hole
Rob,
I believe what you're referring to is a cutting tool arm.
This is an arbor with an "arm" attached that holds a
lathe-type cutting tool on the end. The arbor serves to
hold the drill bit and also al
an email to,
[EMAIL PROTECTED]
- Original Message -
From: "Rob Monitor" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, June 27, 2007 5:01 PM
Subject: [BlindHandyMan] cutting a hole
> HI, Thinks for all the information on the pop rivet gun... Now I need any
> ideas on how to c
anook at our polar bear habitat.
- Original Message -
From: Bill Gallik
To: blindhandyman@yahoogroups.com
Sent: Wednesday, June 27, 2007 6:59 PM
Subject: Re: [BlindHandyMan] cutting a hole
Rob,
I believe what you're referring to is a cutting tool arm. This is an ar
Shane
- Original Message -
From: Dale Leavens
To: blindhandyman@yahoogroups.com
Sent: Wednesday, June 27, 2007 8:38 PM
Subject: Re: [BlindHandyMan] cutting a hole
Are you speaking of cutting sheet metal in this way?
I don't think a standard hole saw is the tool fo
Hi, it's me Rob, I do have a router could I use that any way to cut out this
hole??
THANKS Rob
- Original Message -
From: Shane Hecker
To: blindhandyman@yahoogroups.com
Sent: Wednesday, June 27, 2007 9:08 PM
Subject: Re: [BlindHandyMan] cutting a hole
I don&#
Max is quite correct, this tool is very temperamental.
Bill Gallik
E-Mail: [EMAIL PROTECTED]
- "Nothing changes your opinion of a friend so surely as success - yours or
his."
- Franklin P. Jones
Dale writes:
Are you speaking of cutting sheet metal in this way? I don't think a
standard hole saw is the tool for that job unless there is some sort I am
unaware of which is quite possible.
I have a 4" and a 6" diameter hole saw from Vermont American that are
supposedly capable of cutting sheet
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Rob Monitor
To: blindhandyman@yahoogroups.com
Sent: Wednesday, June 27, 2007 11:18 PM
Subject: Re: [BlindHandyMan] cutting a hole
Hi, it's m
Gallik
To: blindhandyman@yahoogroups.com
Sent: Wednesday, June 27, 2007 11:29 PM
Subject: Re: [BlindHandyMan] cutting a hole
Dale writes:
Are you speaking of cutting sheet metal in this way? I don't think a
standard hole saw is the tool for that job unless there is some sort
How perfect does this hole have to be? 55 gallon drum, I'd use a cutting
torch.
- Original Message -
From: "Bill Gallik" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, June 27, 2007 8:29 PM
Subject: Re: [BlindHandyMan] cutting a hole
> Dale writes:
> Are you spea
Rob,
Those monsters are called "Fly cutters" I think and they are very dangerous as
the cutter is on the end of that arm and flying around in open air near your
little blind body parts. Depending on the thickness of the sheet, you could
drill a series of small holes around the perimeter of the nee
15 matches
Mail list logo
