Wednesday, June 03, 2009 10:34 AM
Subject: [BlindHandyMan] hardware firewall help
>I was doing some cleaning, better yet, I was trying to untangle all the
>wire
> and cables that the cable company made a mess while hooking up both cable
> modems for both internet and phone. While doin
Looking at the back.
The wand port is far left with 1, 2, 3, and 4 output to computer or
device. Then comes the multi/dmz port on some for most its just multi output.
At 10:34 AM 6/3/2009, you wrote:
>I was doing some cleaning, better yet, I was trying to untangle all the wire
>and cables that th
It's that logic learned from being a "single mom who is blind" for
many years. Now that my kids are grown and the husband is sighted, it
still pays to do the logic.
Smile, Betsy
At 05:56 AM 6/3/2009, you wrote:
>Betsy, you are correct and I sincerely apologize for steering him
>wrong. I confuse
Betsy, you are correct and I sincerely apologize for steering him
wrong. I confused my WRT54G, which is stashed in a drawer with my
current Apple router. I pulled the WRT54G out and recalled that the
reset switch is closest to the WAN port and the power connector is on
the extreme left. THi
Assuming you have a unit similar to mine, which is the WRT54G and I'm
fairly sure even newer units are similar, it is the jack closest to
the power connector port.
On Jun 3, 2009, at 10:34 AM, Brice Mijares wrote:
> I was doing some cleaning, better yet, I was trying to untangle all
> the wi
Brice,
My eyes are still sleeping, but on the back of mine, I would guess it
is the one farthest away from the AC. That one is a bit separated
from the others.
Betsy
At 04:34 AM 6/3/2009, you wrote:
>I was doing some cleaning, better yet, I was trying to untangle all the wire
>and cables that the
What model do you have? The port will be labeled WAN if you can get someone to
look at it. I'd just try one side and the other if
your first choice doesn't work. You won't hurt anything. Just power cycle the
unit between tries.
Terry
On Wed, 3 Jun 2009 07:34:30 -0700you write:
>I was doing s
I was doing some cleaning, better yet, I was trying to untangle all the wire
and cables that the cable company made a mess while hooking up both cable
modems for both internet and phone. While doing so, I forgot where I pulled
out the cables leading in, and out of my linksys router.
Can someone
