I wonder if there are any old, old, hams who recognize the above TR switch?
I have one I picked up years ago from a hamfest and I have no info on
it, nor have I been able to find anything online about it.
I have located a June 1957 QST article by W3DM, who is identified with
Lynmar, but it is
I would like to find a good condition, operating, SBE model 34
transceiver. Is there one available that the owner would let go?
Ray, W4BYG
--
"If you want to build a strong house, I'll give you my engineer's number.
If you want to build a strong life, I'll introduce you to my carpenter."
Lebro
Make sure you set the filament voltage to or just below spec with a good
VOM, preferably an RMS meter, or it won't give you the life you would like.
Ray, W4BYG
On 11/7/2020 22:44, Scott Johnson wrote:
It is basically a tungsten lamp with a Titanium lampshade. Go for it.
Scott V. Johnson W7SVJ
Looking for a choke input PS to power my vintage but excellent Elmac AF54H.
Needs to produce about 450 to 500 volts @ 250 mils under load,
preferrably with a 6.3 VAC @5 amps filament winding, for the transmitter.
No filament winding is necessary if there is room for me to install a
filament t
I have a good 2" Simpson 3 amp RF panel meter, which I would like to
install in my 500 watt station. However this one has a bad crack on the
bezel around it and therefore looks ugly.
I would like to find another old 2" Simpson meter of most any value,
which I could take out the movement and re
I previously typed an error in the subject line for the issue I am
looking for. It is Sept, 2008.
Ray, W4BYG
On 2/24/2019 7:50 PM, Ray LaRue wrote:
I wonder if anyone here has a copy of the above article? I was
looking for info on an old mobile transmitter called the Web Jr, or
the Web
I wonder if anyone here has a copy of the above article? I was looking
for info on an old mobile transmitter called the Web Jr, or the Web
Clamper.
I haven't seen the article and am hesitant to purchase it online sight
unseen.
Would appreciate a scan if you have it and can do so.
Your assis
FYI: My Pyramid PS also had a meter failure. I was not able to find a
matching replacement. However, it was fairly easy to find a digital
replacement online to fit in the same place.
Ray, W4BYG
On 8/28/2018 5:02 PM, wendell rushton wrote:
Looking for a 0-15 DCV edge type meter like the volt
If someone has the schematic, I also have an Clegg 031 supply that also
needs attention.?? It's not available on BAMA.?? Please let me know how I
could gain a copy to.
Ray, W4BYG
On 2/21/2018 10:29 PM, Michael Tortorella wrote:
For a Clegg 031 power supply (12 VDC, 7A). I messed up the wiring